![Icon [all products]](https://www.thunder-link.com/tl-content/uploads/2022/05/Icon-all-products-1.svg "Icon [all products]"){kind=icon}
All products
42 in stock Ready to ship
H801MCUD
Huawei MA5608T main control board integrated with 4-port GE optical uplink
15
People watching this product now!
Firmware Upgrades
Firmware Upgrades x
Firmware upgrades allow our customers to utilize the latest features and security enhancements that simply make the devices to operate proficiently Learn more
Hardware Compatibility
Hardware Compatibility x
Backed up by our experienced pre-sales support team, and volume documentation, to avoid purchasing incompatible hardware.
Hardware Tested
Hardware Tested x
In order to avoid hardware malfunction, each equipment will be strictly tested before delivery and the test report will be packed inside equipment and delivered together. Learn more
Software Compatibility
Software Compatibility x
Software compatibility test between active/standby system board, main control board and service board, mother/sub-card; system commissioning test to prevent all software conflicts.
How to Upgrade Huawei MA5600T Series OLT
We take Huawei MA5680T as an example in this article to briefly elaborates the upgrade process of Huawei MA5608T / MA5680T / MA5683TDescription
Supports up to 256 Gbit/s (active/standby mode), 512 Gbit/s (load sharing mode) switching capacity.
Supports active/standby mode and load sharing mode doubling processing performance
Supports ISSU saving the upgrade interruption time
Supports synchronization Ethernet
MCUD is a main control card of Huawei OLT MA5608T, it provides system control and service switching and aggregation, integrates 4 GE upstream ports. Switching capacity 256G (active/standby mode) , MAX access 2048 subscribers. MCUD has one hardware version, H801MCUD.
Tech Specs
| Front panel | |
|
|
|
| Specification | |
| LAN switch | 24 x GE + 4 x 10GE |
| Switching capacity | 256 Gbit/s (active/standby mode) 512 Gbit/s (load sharing mode) |
| Bandwidth per slot | 10 Gbit/s (active/standby mode) 20 Gbit/s (load sharing mode) |
| MAC address table | 32768 |
| Access user | 2048 |
| Multicast user | 2048 |
| Configurable multicast channel | 4096 |
| Concurrent multicast channel | 2000 |
| IPv4 routing table | 5120 |
| IPv6 routing table | 5120 |
| Service port | 20480 |
| ARP table | 8192 |
| ACL rule | 896 |
| Maximum Frame Size | 2052 bytes. After the jumbo frame function is enabled, a maximum of 9216 bytes can be supported. |
| VRF (L3 VPN) | Supported |
| Operating temperature | -25°C to +65°C |
| Power consumption | Static: 24 W Maximum: 26 W |
| Mechanical Specification | |
| Dimensions(mm) | 233 (W) x 134 (D) x 34 (H) |
| Weight(kg) | 1 |
Additional information
| Weight | 2.0 kg |
|---|---|
| Dimensions | 34.0 × 25.5 × 10.0 cm |
| Brand | |
| Features |
Firmware Upgrades, Hardware Compatibility, Hardware Tested, Software Compatibility |
Q&A
Q: What’s the difference between MCU boards?
A: Major differences between MCU boards:
| Board | One input of BITS clock signals and one input of BITS clock signals | One input of 1PPS+TOD time signals and one output of 1PPS+TOD time signals | Stratum-3 clock | D-CMTS cluster management |
| H801MCUD | No | No | No | No |
| H801MCUD1 | Yes | Yes | Yes | No |
| H801MCUE | No | No | No | Yes |
Ports of MCU boards:
| Board | Panel ports | Internal interfaces | |
| Channel to the GIU board | Channel to the standby control board | ||
| H801MCUD | 4 GE ports | 2 GE/10GE ports | Providing one 10GE port for load sharing with the standby H801MCUD board |
| H801MCUD1 | 2 GE ports and 2 GE/10 GE ports | 2 GE/10GE ports | Providing one 10GE port for load sharing with the standby H801MCUD1 board |
| H801MCUE | 4 GE ports | 2 GE/10GE ports | Providing one 10GE port for load sharing with the standby H801MCUE board |
Q: Can I insert 10GE SFP+ modules on MCUD?
A: No, it is GE uplink port on MUCD, so only can recognize GE SFP, cannot ecognize 10GE SFP+ modules.
Relevant Items…
Matching Products…
Reviews (3)
3 reviews for H801MCUD
Why Thunder-link.com
Reimer
Canada
MCUD has four 4GE uplink port, very suitable for me
Hel Chamroeun
Germany
Can you show me, How to configure or process of MCUD card ?
Hel Chamroeun
Spain
Can you show me, How to configure or process of MCUD card ?