OSN1500B Silver Line Configuration Including:
OSN1500B Subrack, with 1+1 PIU, 1PCS AUX
2 PCS Q2CXL4 Equipped, Support Cross-Connect and Main Control 1+1 Redundancy, and Provide 2*STM-4 Optical Interface, Transmission Distance 15KM.
1 PCS SLQ1(S-1.1) Equipped, Support 4*STM1 Optical Interface, transmission distance 15KM.
1 PCS R1EFT4 Equipped, Support 4*FE Electrical Interface.
Cross-Connect Capacity is 20G/High order, 20G/Low order.
System Software Loaded by default, Version Available at V1R8 or V1R10.
SFP Module for Optical Interface can be Swappable to Support Longer Transmission Distance.
Huawei OSN1500B Silver Line Configuration, is a recommended board bundle provided by Thunder-link.com, it has common service type and ordinary ports. You can find other configuration bundle at CONFIGURE page, where you can even configure by yourself by selecting the boards you need. If you need customized configuration, please contact with Thunder-link.com Sales Team, who will come back to you shortly.
|Switching Capacity||TDM: 20 Gbit/s (higher order), 20Gbit/s (lower order)|
|Service Slots||1 full slot occupied, 2 remain|
1 half slot occupied, 3 remain
|Supported Interfaces||MSTP interfaces||STM4, STM1, FE|
|Packet transport interfaces||NA|
|Power Supply||DC: -48V DC or -60V DC|
|Number of Services Equipped||Service Interface||Equipped||Service Interface||Equipped|
|Clock Synchronization||Line clock source|
Tributary clock source
Two external clock inputs/outputs (2 MHz or 2 Mbit/s)
|Auxiliary Interface||Orderwire interface|
Management serial, serial, 10M/100M NM, commissioning interface
Alarm interface, Cabinet alarm indicator interface
|Dimensions (mm)||221 (H) x 444 (W) x 263 (D)|
Q: What is the slot access capacity?
A: Before slot division of the OptiX OSN 1500B:
In the OSN 1500B subrack, slots 11-13 can be divided into half-width slots. Slot 11 can be divided into two half-width slots numbered slot 1 and 11, slot 12 can be divided into two half-width slots numbered slot 2 and 12, and slot 13 can be divided into two half-width slots numbered slot 3 and 13.
Q: What boards are applicable on OSN 1500B?
|List of cross-connect board|
|Q2CXL1||1xSTM-1 SCC unit, cross-connect unit, timing unit, and line unit integrated board|
|Q2CXL4||1xSTM-4 SCC unit, cross-connect unit, timing unit, and line unit integrated board|
|Q2CXL16||1xSTM-16 SCC unit, cross-connect unit, timing unit, and line unit integrated board|
|Q5CXLLN||1xSTM-16/STM-4/STM-1 SCC unit, cross-connect unit, timing unit, and line unit integrated board|
|R1CXLLN||1xSTM-16/STM-4/STM-1 SCC unit, cross-connect unit, timing unit, and line unit integrated board|
|R1PCXLN||SCC unit, cross-connect unit, optical interface unit integrated board|
|List of packet processing boards|
|Q1PEGS2||2xGE processing board||R1PEF4F||4xFE optical processing board|
|R1PEGS1||1xGE processing board||R1ML1||Multi-protocol 16xE1 electrical processing board|
|R1PEFS8||8xFE processing board|
|List of List of SDH boards|
|N3SL16, N3SL16A||1xSTM-16 optical interface board||N1SF16E||1xSTM-16 optical interface board (with the outband EFEC function)|
|N1SL16,N1SL16A, N2SL16,N2SL16A||1xSTM-16 optical interface board||N3SLQ41||4xSTM-4/STM-1 optical interface board|
|N1SF16||1xSTM-16 optical interface board (with the outband FEC function)||N1SLQ4, N2SLQ4||4xSTM-4 optical interface board|
|N1SLQ4A||4xSTM-4 optical interface board||N1SLD4, N2SLD4, N1SLD4A||2xSTM-4 optical interface board|
|R1SLD4||2xSTM-4 optical interface board (divided slot)||R1SL4||1xSTM-4 optical interface board (divided slot)|
|N1SL4, N2SL4, N1SL4A||2xSTM-4 optical interface board||N1SLT1||12xSTM-1 optical interface board|
|N1EU08||8xSTM-1 electrical interface board||N1OU08((LC) N2OU08(SC)||8xSTM-1 optical/electrical interface board|
|N2SLO1, N3SLO1||8xSTM-1 optical interface board||N1SLQ1, N2SLQ1||4xSTM-1 optical interface board|
|N1SLQ1A||4xSTM-1 optical interface board||R1SLQ1||4xSTM-1 optical interface board (divided slot)|
|N1EU04||4xSTM-1 electrical interface board||N1SEP1||2xSTM-1 when interfaces are available on front panel.8xSTM-1 when interfaces are available on corresponding interface board|
|N1SL1, N2SL1, N1SL1A||1xSTM-1 optical interface board||R1SL1||1xSTM-1 optical interface board (divided slot)|
|List of List of PDH board|
|N1SPQ4||4xE4/STM-1 electrical processing board||N2SPQ4||4xE4/STM-1 electrical processing board|
|N1MU04||4xE4/STM-1 electrical interface board||N2PQ3||12xE3/T3 service processing board|
|N1D34S||6xE3/T3 electrical switching interface board||N1C34S||3xE3/T3 electrical switching interface board|
|N1PD3, N2PD3||6xE3/T3 service processing board||N1PL3, N2PL3||3xE3/T3 service processing board|
|N1PL3A, N2PL3A||3xE3/T3 service processing board (Interfaces are available on the front panel.)||N1PQ1||63xE1 service processing board|
|N2PQ1||63xE1 service processing||N1PQM||63xE1/T1 service processing board|
|N1D12B||32xE1/T1 electrical switching interface board||N1D12S||32xE1/T1 electrical switching interface board (120 ohms)|
|N1D75S||32xE1 electrical switching interface board (75 ohms)||R1PD1, R2PD1||32xE1 service processing board|
|R1PL1||16xE1 service processing board||N1PFL1||8xE1 optical processing board|
|N1TSB8||8-port electrical switching interface board||N1TSB4||4-port electrical switching interface board|
|N1DX1||DDN service accessing and converging board||N3DX1||DDN service accessing and converging board|
|N1DXA||DDN service converging and processing board||N1DM12||DDN service interface board|
|List of EoS boards|
|N1EFT8,N2EFT8||8xFE/16xFE transparent transmission board||N1EFT8A, N2EFT8A||8xFE transparent transmission board|
|N1EFS0A||16xFE switching and processing board||N1EFS0,N2EFS0, N4EFS0, N5EFS0||8xFE switching and processing board|
|N1EFS4, N2EFS4, N3EFS4||4xFE switching and processing board||R1EFT4, R2EFT4||4xFE transparent transmission board (divided slot)|
|N1EMS4||4xGE and 16xFE switching and processing board||N1EMS2||2xGE and 16xFE switching and processing board|
|N1EGS4, N3EGS4||4xGE switching and processing board||N1EGT2, N2EGT2||2xGE transparent transmission board|
|N2EGS2, N3EGS2||2xGE switching and processing board||N1EFF8,N1EFF8A||8x100M Ethernet optical interface board|
|N1ETF8,N1ETF8A||8x100M Ethernet twisted-pair interface board||N1ETS8||8x10/100M Ethernet twisted pair interface switching board|
|List of ATM boards|
|N1ADL4, N1IDL4||1xSTM-4 ATM service processing board||N1ADQ1, N1IDQ1||4xSTM-1 ATM service processing board|
|List of RPR boards|
|N2EGR2||2xGE ring processing board||N2EMR0||12xFE and 1xGE ring processing board|
|List of RPR boards|
|N1VST4||4-port video service transparent transmission board||N1MST4||4-port multi-service transparent transmission board|
|List of RPR boards PCM boards|
|N1FXSO12||12-port FXS/FXO processing board||N1FXS12||12-port FXS processing board|
|N1FXO12||12-port FXO processing board||N1AT6||6-port 2/4 wire and E&M processing board|
|Lost of WDM board|
|TN11CMR4||4-channel optical add/drop multiplexing board||N1MR2C,N1MR2B||2-channel optical add/drop multiplexing board|
|TN11CMR2, TN11MR2 N1MR2A||2-channel optical add/drop multiplexing board||TN11MR2||2-port optical add/drop multiplexing board|
|TN11MR4||4-port optical add/drop multiplexing board||N1CMD2||2-channel bidirectional optical multiplexer and demultiplexer board|
|N1LWX||Arbitrary bit rate wavelength conversion board||N1FIB||Filter isolating board|
|List of auxiliary boards|
|R1EOW||Orderwire processing board||R1AUX, R2AUX||System auxiliary interface board|
|R1AMU||Orderwire processing or alarm cascading board||R1FAN||Fan board|
|List of optical amplifier boards|
|N1BPA||One-channel power amplifier and one-channel pre-amplifier board||N2BPA||One-channel power amplifier and one-channel pre-amplifier board|
|N1BA2||Two-channel power amplifier board||N1COA, 61COA, 62COA||Case-shaped optical amplifier|
|N1RPC01||Forward Raman driving board (external)||N1RPC02||Backward Raman driving board (external)|
|List of power boards|
|UPM||Uninterruptible power module||R1PIU,R1PIUB||Power interface board|
Q: Can I use new version board to replace old version ones?
A: Yes, most of OSN1500B service board, you can use newer version to replace old ones, here listed some ordinary substitution boards below, or you can contact Thunder-link.com technical sales team to confirm the board substitution relation.
|Substitute Board||To-Be-Substituted Board||Substitute Board||To-Be-Substituted Board|
|N3SL16A||N1SL16A||N3SLQ41||N1SLQ1 N1SLQ4 N2SLQ1 N2SLQ4|
|N5EFS0||N1EFS0 N2EFS0 N4EFS0|
Q: Is there any restrictions for board substitution?
A: Yes, there list some restrictions when board substitution below or you can contact Thunder-link.com technical sales team to confirm the board substitution relation.
|Board that supports board version replacement functions||Board that cannot Be substituted||Condition|
|The TCM function is enabled for the N2SL16A/N3SL16A.|
|N3SL16||N2SL16||The TCM function is enabled or AU-3 services are configured for the N2SL16|
|N3SL16A||N2SL16A||AU-3 services are configured for the N2SL16A.|
|N3SLO1||N2SLO1||AU-3 services are configured for the N2SLO1.|
|N2EFS0, N4EFS0||N1EFS0||N1EFS0 is configured with QoS functions. If an N4EFS0/N2EFS0 is configured as N1EFS0 and the simulation package loading method is used, the board software of N1EFS0 is loaded. As a result, a cold reset is performed on the board and board version replacement function becomes ineffective. Therefore, an N4EFS0/N2EFS0 must not be configured as an N1EFS0.|
|N4EFS0||N2EFS4||If an N4EFS0 is configured as an N2EFS0 and the simulation package loading method is used, the board software of the N2EFS0 is loaded. As a result, a cold reset is performed on the board and the board version replacement function becomes ineffective. Therefore, an N4EFS0 must not be configured as an N2EFS0.|
|N2EGS2||N1EGS2||The N1EGS2 is configured with QoS functions.|
Q: Do you have U2000 NMS if I buy OSN1500B from you?
A: Yes, we can share U2000 software package to our customers for free.
Q: Do you have U2000 NMS License if I buy OSN1500B from you?
A: Yes, we provide to our customer U2000 license for test purpose, not for commercial use.
Q: Does OSN1500B have AC power supply?
A: No, OSN1500B power interface unit PIU is DC -48V input only, if you need a AC/DC power converter, please contact with Thunder-link.com sales team.
Q: Do you offer OSN1500B Subrack separately?
A: Yes, please contact with our sales team for details.
|Thunder-link.com have regular products in stock, and work together with reliable and high efficiency shipment partner, could deliver to our customers worldwide shortly. In normal condition, your cargo would take 3-5 days lead time and inland transportation to your carriers, then takes delivery days as per different delivery method, would be arrived at your destination safely and securely through reliable international carriers. Tracking No. will be provided once delivery out.|
|There are 3 delivery methods as default selection.|
|· FCA China Mainland.|
|Free of charge for FCA China Mainland|
|· FCA Hong Kong.|
|Flat rate 150USD for cargo under 100KG. We can delivery to your appointed address in Hong Kong, like your forwarders address.|
|Please note: |
1, Our warehouses and cargoes are not located in Hong Kong, there are logistic and customs commission charges during China to Hong Kong.
2, If your cargo is small dimension, instead of delivery to you Hong Kong carrier, choosing our DHL service to deliver to your country directly is highly recommended.
|International shipping methods are by express like DHL/ Fedex/ UPS, DHL is default; or by normal airfreight; |
For cargoes under 45kg, DHL is recommended; For cargoes more than 45kg, considering the time-effectiveness, customs clearance convenience, and freight cost, our sales team will provide DHL and normal airfreight cost for your choice.
1, Insurance is not included by default, please tell our sales team if you need a insurance during transportation.2, DHL is door to door service, if you choose normal airfreight, you should collect the cargo at airport; and if there have no airport at your city, you should also responsible for the inland transportation between airport to your place.
|Thunder-link.com accepts variety payment methods. We will constantly upgrade our payment system and provide the most convenient method for our client. The Customer may make payment by any one of the following methods, and Wire Transfer is the regular method in Thunder-link.com.|
|Paying with Wire Transfer|
|You can do from any your local bank. Usually, we will have your payment within 2 to 3 day.|
|All fee (payer & payee) generated by the bank wire transfer should be bear by client. Otherwise, the fee will be deducted from the payment we receive.|
|Paying with Paypal|
|Thunder-link.com offers an alternative secure payment method via PayPal. PayPal does not insist you open an account, making payment by Credit or Debit card even easier. It's advised you do create an account to enable the benefits of signing up with PayPal, such as buyer protection and faster checkout next time without the need to enter your card details. Our invoicing and back order systems with PayPal work differently from our other payment methods. Our returns system is slightly different, we can only refund you for the items rather than swap them. When paying through PayPal the total order amount will be paid for immediately at checkout when you commit to buy. The items will then be dispatched when we process the order as quickly as we can. If items are out of stock we will aim to dispatch them as soon as possible after they arrive here. The same applies for any back orders that are created due to out of stock items within a larger order. Any canceled orders will be refunded as quickly as possible. Any returns will always be charged back to your original payment method.|
|Paying with Western Union|
|When you buy some items in Thunder-link.com, you have the option of paying for them at any participating Western Union location. The Western Union charge that applies to Thunder-link.com is based on the total amount of your transaction.|
|All fee (payer & payee) generated by the bank wire transfer should be paid by client.Otherwise, the fee will be deducted from the payment we receive.|
Paying with Alipay
|Now Alipay is acceptable at Thunder-link.com, if you have and intend to pay by an Alipay account, please contact with our sales team.|
|Please send us the T/T payment advice with date and invoice number by using below email or telephone number.|
|Email to: [email protected] Call to : +852-3062-3083|
|All products are vender original products, we provide new equipment for customers, never been used before. Some scratching or copper rust might be seen on the modules, that may caused by carry, inserting in/out from chassis during our in-stock and pre-delivery testing. In normal condition, the scratching and rust are very slightly. When meet with this situation, a picture will send to you first to obtain your confirmation before delivery to you.|
|Once you bought products from us, we will provide the best post sale service for you. After the shipping out, we will continuously track your cargo until it arrives to your country or region. If there is something wrong during the delivery, we will do our utmost to help you.|
|Generally, all products provided by Thunder-link.com, will come with standard vender like 1 year warranty. During the warranty period, Thunder-link.com will replace any defective Equipment, but the reverse logistics should responsible by buyer, the re-shipment should obey the trade terms of order. If it is unable to locate a suitable replacement, Thunder-link.com will repair the Equipment. If it is unable to do either, Thunder-link.com will refund the purchase price to Buyer.|
|This warranty does not apply to any failure of the Equipment as a result of misuse, abuse, accident, neglect or mishandling, lack of proper maintenance, environmental factors, improper installation or configuration, flood, fire or other natural disasters, physical damage, electrical issues such as lightning, power surges or incorrect electrical voltages, or improper modifications.|
|This warranty is only valid for the original purchaser of the Equipment (“Buyer”).|
But if products fail during warranty time, please contact your sales representative, or email to [email protected] to verify your problem and enquire solutions for the failed products. If the problem still can't be fixed by remote support trouble shooting methods i.e. email or phone support, then return procedure triggered.
|See details when you start the return procedure to return policy.|
|If there’s any post sale question please e-mail at [email protected] or contact with your sales representative.|
- CXL4 Hardware Description
- SLQ1 Hardware Description
- OptiX OSN 1500 Alarms and Performance Events Reference(V100R008)
- OptiX OSN 1500 Hardware Description(V200R013)
- OptiX OSN 1500 Parts Replacement(V100R008)
- OptiX OSN 1500 Product Description(V200R013)
- OptiX OSN 1500 Smooth Upgrade Guide(V200R013)
- OptiX OSN 1500 Supporting Tasks(V100R008)
- OptiX OSN 1500 Troubleshooting(V100R008)
- OSN 1500 V100R008 Product Description 10
- OSN 1500&3500&7500&7500 II Hot Patch Upgrade Guide