OSN3500 Gold Line configuration including:
OSN3500 Subrack, with 1+1 PIU, 1PCS AUX
1+1 SXCSA equipped, 200G high order, 20G low order, 155G Access capacity.
1+1 N4GSCC equipped, System Control and Communication Board
2 PCS SLD64(S-64.2b) equipped, 2xSTM-64 Optical Interface Board(S-64.2b,LC)
1 PCS SLQ16(S-16.1) equipped, 4xSTM-16 Optical Interface Board(S-16.1,LC)
1 PCS SLQ4(S-4.1) equipped, 4xSTM-4 Optical Interface Board(S-4.1,LC)
1 PCS SLO1(S-1.1) equipped, 8xSTM-1 Optical Interface Board(S-1.1,LC)
1 PCS EGS412 equipped, 4xGE Optical Interface Board(1000BASE-LX,1310-LC)
1 PCS EFS0+1PCS ETF8 equipped, 8xFE Electrical Interface Board(1000BASE-LX,1310-LC)
Huawei OSN3500 Gold Line Configuration, is a recommended board bundle provided by Thunder-link.com, it has common service type and ordinary ports. You can find other configuration bundle at CONFIGURE page, where you can even configure by yourself by selecting the boards you need. If you need customized configuration, please contact with Thunder-link.com Sales Team, who will come back to you shortly.
|Switching Capacity||TDM: 200 Gbit/s (higher order), 20Gbit/s (lower order)|
|Service Slots||7 full slot occupied, 7 remain|
|Power Supply||DC: -48V DC or -60V DC|
|Number of Services Equipped||Service Interface||Equipped||Service Interface||Equipped|
|Dimensions (mm)||497 (W) x 295 (D) x 722 (H)|
Q: What is the slot access capacity?
A: OSN3500 slot access capacity is different when equip with different Cross-Connect Board.
When equip with N1GXCSA, the slot bandwidth is like below: When equip with N1EXCSA:
When equip with N1UXCSA/B: When equip with N1SXCSA/B:
When equip with N2PSXCSA: When equip with N1FXCSA:
Q: What boards are applicable on OSN3500?
|List of Cross Connect Boards|
|Super Cross-connect and Synchronous Timing Board (supporting packet features)||N1SXCSA||Super cross-connect and synchronous timing board (only applicable in TDM mode)|
|N1GXCSA||General cross-connect and synchronous timing board||N1SXCSB||Super cross-connect and synchronous timing board (connected to the extended subrack)|
|N1EXCSA||Enhanced cross-connect and synchronous timing board||N1IXCSA||Infinite cross-connect and synchronous timing board|
|N1UXCSA||Ultra cross-connect and synchronous timing board||N1IXCSB||Infinite cross-connect and synchronous timing board (connected to the extended subrack)|
|N1UXCSB||Ultra cross-connect and synchronous timing board (connected to the extended subrack)||N1XCE||Cross-connect and timing board for the extended subrack|
|N1FXCSA||Full cross-connect and synchronous timing board|
|List of System Control Board|
|System Control and Communication Board|
|List of packet processing boards|
|N1PEX2||2-port 10 Gigabit Ethernet switching processing board||N1PEX1/N2PX1||1x10GE Ethernet processing board|
|N1PEG16||16xGE Ethernet processing board||N1PEG8||8-port Gigabit Ethernet switching processing board|
|List of packet interface boards|
|N1CQ1||4-port channelized STM-1 CES optical interface board||N1PEFF8||8-port FE optical interface board|
|N1PETF8||8xFE electrical interface board||N1MD12||Multi-protocol 32xE1 interface board (120 ohms)|
|N1MD75||Multi-protocol 32xE1 interface board (75 ohms)|
|List of EoD boards|
|N1EDQ41||4-port 622/155 Mbit/s SDH optical interface Ethernet dual-mode multi-function processing board|
|List of SDH boards|
|N4SLD64/N1SLD64||2xSTM-64 optical interface board||N4SLO16|
|8xSTM-16 optical interface board|
|N4SFD64||2xSTM-64 optical interface board with the FEC function||N4SLQ16|
|4xSTM-16 optical interface board|
|N1SL64/N2SL64/N4SL64||1xSTM-64 optical interface board||N1SLD16||2xSTM-16 optical interface board|
|N3SL16/N3SL16A||1xSTM-16 optical interface board||N1SL16/N1SL16A|
|1xSTM-16 optical interface board|
|N1SF16||1xSTM-16 optical interface board (with the outband FEC function)||N3SLH41||16xSTM-4/STM-1 optical interface board|
|N1SF16E||1xSTM-16 optical interface board (with the outband EFEC function)||N3SLQ41||4xSTM-4/STM-1 optical interface board|
|N1SLD4/N2SLD4/N1SLD4A||2xSTM-4 optical interface board||N1SLQ4/N2SLQ4||4xSTM-4 optical interface board|
|N1SL4/N2SL4/N1SL4A||1xSTM-4 optical interface board||N1SLQ4A||4xSTM-4 optical interface board|
|N1SLH1||16xSTM-1 signal processing board||N1SLT1||12xSTM-1 optical interface board|
|N1EU08||8xSTM-1 electrical interface board||N1OU08||8xSTM-1 optical/electrical interface board (LC)|
|N2SLO1/N3SLO1||8xSTM-1 optical interface board||N2OU08||8xSTM-1 optical interface board (SC)|
|N1SLQ1/N2SLQ1/N1SLQ1A||4xSTM-1 optical interface board||N1SL1/N2SL1/N1SL1A||1xSTM-1 optical interface board|
|N1SEP1||2xSTM-1 line processing board when interfaces are available on the front panel|
8xSTM-1 line processing board when interfaces are available on the corresponding
|List of PDH boards|
|N1SPQ4/N2SPQ4||4xE4/STM-1 electrical processing board||N1MU04||4xE4/STM-1 electrical interface board|
|N2PQ3||12xE3/T3 service processing board||N1D34S||6xE3/T3 electrical switching interface board|
|N1C34S||3xE3/T3 electrical switching interface board||N1PD3/N2PD3||6xE3/T3 service processing board|
|N1PL3/N2PL3||3xE3/T3 service processing board||N1PL3A/N2PL3A||3xE3/T3 service processing board (Interfaces are available on the front panel.)|
|N1PQ1/N2PQ1||63xE1 service processing board||N1PQM||63xE1/T1 service processing board|
|N1D12B||32xE1/T1 electrical switching interface board||N1D12S||32xE1/T1 electrical switching interface board (120 ohms)|
|N1PFL1||8xE1 optical processing board||N1D75S||32xE1 electrical switching interface board (75 ohms)|
|N1TSB8||8-port electrical switching interface board||N1DX1/N3DX1||DDN service accessing and converging board|
|N1DM12||DDN service interface board||N1DXA||DDN service converging and processing board|
|List of EoS boards|
|N1EFT8/N2EFT8||8xFE/16xFE transparent transmission board||N1EAS2/N3EAS2||2x10GE Layer 2 switching and processing board|
|N1EFT8A/N2EFT8A||8xFE transparent transmission board||N1EGSH||16xGE switching and processing board|
|N1EFS0A||16xFE switching and processing board||N1EMS4||4xGE and 16xFE switching and processing board|
|8xFE switching and processing board||N1EMS2||2xGE and 16xFE switching and processing board|
|N1EFS4/N2EFS4/N3EFS4||4xFE switching and processing board||N1EGS/4N3EGS4||4xGE switching and processing board|
|N1EFF8/N1EFF8A||8x100M Ethernet optical interface board||N1EGT/2N2EGT2||2xGE transparent transmission board|
|N1ETF8/N1ETF8A||8x100M Ethernet twisted-pair interface board||N2EGS2, N3EGS2||2xGE switching and processing board|
|N1ETS8||8x10/100M Ethernet twisted pair interface switching board|
|List of ATM boards|
|N1ADL4/N1IDL4||1xSTM-4 ATM service processing board||N1ADQ/1N1IDQ1||4xSTM-1 ATM service processing board|
|List of RPR boards|
|N2EGR2||2xGE ring processing board||N2EMR0||12xFE and 1xGE ring processing board|
|List of SAN/video boards|
|N1VST4||4-port video service transparent transmission board||N1MST4||4-port multi-service transparent transmission board|
|List of PCM boards|
|N1FXSO12||12-port FXS/FXO processing board||N1FXS12||12-port FXS processing board|
|N1FXO12||12-port FXO processing board||N1AT6||6-port 2/4 wire and E&M processing board|
|List of WDM boards|
|TN11CMR4||4-channel optical add/drop multiplexing board||TN11CMR/TN11CMR2||2-channel optical add/drop multiplexing board|
|TN11MR2||2-port optical add/drop multiplexing board||N1MR2C/N1MR2A||2-channel optical add/drop multiplexing board|
|TN11MR4||4-port optical add/drop multiplexing board||N1CMD2||2-channel bidirectional optical multiplexer and demultiplexer board|
|N1LWX||Arbitrary bit rate wavelength conversion board||TNN1XMD2||2-channel bidirectional optical add/drop multiplexing board|
|N1FIB||Filter isolating board|
|List of auxiliary boards|
|N1AUX||System auxiliary interface board||N1FAN||Fan board|
|List of optical amplifier boards and dispersion compensation boards|
|N1BPA/N2BPA||One-channel power amplifier and one-channel pre-amplifier board||N1COA, 61COA,62COA||Case-shaped optical amplifier|
|N1DCU/N2DCU||Dispersion compensation board||TN11OBU1/TN12OBU2||Optical booster amplifier board|
|N1BA2||Two-channel power amplifier board||N1RPC01/N1RPC02||Backward Raman driving board (external)|
|lists all power boards and their applicable products.|
|UPM||Uninterruptible power module||N1PIU||Power interface board (supporting standard subracks)|
|N1PIUA||Power interface board (supporting 1100 W enhanced subrack.)||N1PIUB||Power interface board (supporting type III subracks)|
Q: Can I use new version board to replace old version ones?
A: Yes, most of OSN3500 service board, you can use newer verison to replace old ones, here listed some ordinary substitution boards below, or you can contact Thunder-link.com technical sales team to confirm the board substitution relation.
|Substitute Board||To-Be-Substituted Board||Substitute Board||To-Be-Substituted Board|
Q: Is there any restrictions for board substitution?
A: Yes, there list some restrictions when board substitution below, or you can contact Thunder-link.com technical sales team to confirm the board substitution relation.
|Board That Supports the Board Version Replacement Function||Board That Cannot Be Substituted||Condition|
|N1SL16A||N2SL16A/N3SL16A||The TCM function is enabled for the N2SL16A/N3SL16A.|
|N1SL64||N2SL64||The TCM function is enabled or AU-3 services are configured for the N2SL64.|
|N1SLQ16||N2SLQ16||The TCM function is enabled or AU-3 services are configured for the N2SLQ16.|
|N3SL16||N2SL16||The TCM function is enabled or AU-3 services are configured for the N2SL16.|
|N3SL16A||N2SL16A||AU-3 services are configured for the N2SL16A.|
|N3SLO1||N2SLO1||AU-3 services are configured for the N2SLO1.|
|N4SL64||N2SL64||The TCM function is enabled or AU-3 services are configured for the N2SL64.|
|N2EFS0/N4EFS0||N1EFS0||The N1EFS0 is configured with QoS functions.If an N4EFS0/N2EFS0 is configured as an N1EFS0 and the simulation package loading method is used, the board software of the N1EFS0 is loaded. As a result, a cold reset is performed on the board and the board version replacement function becomes ineffective. Therefore, an N4EFS0/N2EFS0 must not be configured as an N1EFS0.|
|N2EFS4||N1EFS4||If an N2EFS4 is configured as an N1EFS4 and the simulation package loading method is used, the board software of the N1EFS4 is loaded. As a result, a cold reset is performed on the board and the board version replacement function becomes ineffective. Therefore, an N2EFS4 must not be configured as an N1EFS4.|
|N4EFS0||N2EFS0||If an N4EFS0 is configured as an N2EFS0 and the simulation package loading method is used, the board software of the N2EFS0 is loaded. As a result, a cold reset is performed on the board and the board version replacement function becomes ineffective. Therefore, an N4EFS0 must not be configured as an N2EFS0.|
|N2EGS2||N1EGS2||The N1EGS2 is configured with QoS functions.|
|N1BPA||N2BPA||The ALS function is required but not enabled on the line board.|
|N2BPA||N1BPA||The ALS function is required but not enabled on the N2BPA.|
A: Yes, we can share U2000 software package to our customers for free.
Q: Do you have U2000 NMS License If I buy OSN 3500 from you?
A: Yes, we provide to our customer U2000 license for test purpose, not for commercial use.
Q: Does OSN3500 have AC power supply?
A: No, OSN3500 power interface unit PIU is DC -48V input only, if you need a AC/DC power converter, please contact with Thunder-link.com sales team.
Q: Do you offer OSN3500 Subrack separately?
A: Yes, please contact with our sales team for details.
|Thunder-link.com have regular products in stock, and work together with reliable and high efficiency shipment partner, could deliver to our customers worldwide shortly. In normal condition, your cargo would take 3-5 days lead time and inland transportation to your carriers, then takes delivery days as per different delivery method, would be arrived at your destination safely and securely through reliable international carriers. Tracking No. will be provided once delivery out.|
|There are 3 delivery methods as default selection.|
|· FCA China Mainland.|
|Free of charge for FCA China Mainland|
|· FCA Hong Kong.|
|Flat rate 150USD for cargo under 100KG. We can delivery to your appointed address in Hong Kong, like your forwarders address.|
|Please note: |
1, Our warehouses and cargoes are not located in Hong Kong, there are logistic and customs commission charges during China to Hong Kong.
2, If your cargo is small dimension, instead of delivery to you Hong Kong carrier, choosing our DHL service to deliver to your country directly is highly recommended.
|International shipping methods are by express like DHL/ Fedex/ UPS, DHL is default; or by normal airfreight; |
For cargoes under 45kg, DHL is recommended; For cargoes more than 45kg, considering the time-effectiveness, customs clearance convenience, and freight cost, our sales team will provide DHL and normal airfreight cost for your choice.
1, Insurance is not included by default, please tell our sales team if you need a insurance during transportation.2, DHL is door to door service, if you choose normal airfreight, you should collect the cargo at airport; and if there have no airport at your city, you should also responsible for the inland transportation between airport to your place.
|Thunder-link.com accepts variety payment methods. We will constantly upgrade our payment system and provide the most convenient method for our client. The Customer may make payment by any one of the following methods, and Wire Transfer is the regular method in Thunder-link.com.|
|Paying with Wire Transfer|
|You can do from any your local bank. Usually, we will have your payment within 2 to 3 day.|
|All fee (payer & payee) generated by the bank wire transfer should be bear by client. Otherwise, the fee will be deducted from the payment we receive.|
|Paying with Paypal|
|Thunder-link.com offers an alternative secure payment method via PayPal. PayPal does not insist you open an account, making payment by Credit or Debit card even easier. It's advised you do create an account to enable the benefits of signing up with PayPal, such as buyer protection and faster checkout next time without the need to enter your card details. Our invoicing and back order systems with PayPal work differently from our other payment methods. Our returns system is slightly different, we can only refund you for the items rather than swap them. When paying through PayPal the total order amount will be paid for immediately at checkout when you commit to buy. The items will then be dispatched when we process the order as quickly as we can. If items are out of stock we will aim to dispatch them as soon as possible after they arrive here. The same applies for any back orders that are created due to out of stock items within a larger order. Any canceled orders will be refunded as quickly as possible. Any returns will always be charged back to your original payment method.|
|Paying with Western Union|
|When you buy some items in Thunder-link.com, you have the option of paying for them at any participating Western Union location. The Western Union charge that applies to Thunder-link.com is based on the total amount of your transaction.|
|All fee (payer & payee) generated by the bank wire transfer should be paid by client.Otherwise, the fee will be deducted from the payment we receive.|
Paying with Alipay
|Now Alipay is acceptable at Thunder-link.com, if you have and intend to pay by an Alipay account, please contact with our sales team.|
|Please send us the T/T payment advice with date and invoice number by using below email or telephone number.|
|Email to: [email protected] Call to : +852-3062-3083|
|All products are vender original products, we provide new equipment for customers, never been used before. Some scratching or copper rust might be seen on the modules, that may caused by carry, inserting in/out from chassis during our in-stock and pre-delivery testing. In normal condition, the scratching and rust are very slightly. When meet with this situation, a picture will send to you first to obtain your confirmation before delivery to you.|
|Once you bought products from us, we will provide the best post sale service for you. After the shipping out, we will continuously track your cargo until it arrives to your country or region. If there is something wrong during the delivery, we will do our utmost to help you.|
|Generally, all products provided by Thunder-link.com, will come with standard vender like 1 year warranty. During the warranty period, Thunder-link.com will replace any defective Equipment, but the reverse logistics should responsible by buyer, the re-shipment should obey the trade terms of order. If it is unable to locate a suitable replacement, Thunder-link.com will repair the Equipment. If it is unable to do either, Thunder-link.com will refund the purchase price to Buyer.|
|This warranty does not apply to any failure of the Equipment as a result of misuse, abuse, accident, neglect or mishandling, lack of proper maintenance, environmental factors, improper installation or configuration, flood, fire or other natural disasters, physical damage, electrical issues such as lightning, power surges or incorrect electrical voltages, or improper modifications.|
|This warranty is only valid for the original purchaser of the Equipment (“Buyer”).|
But if products fail during warranty time, please contact your sales representative, or email to
[email protected] to verify your problem and enquire solutions for the failed products. If the problem
still can't be fixed by remote support trouble shooting methods i.e. email or phone support, then return procedure
|See details when you start the return procedure to return policy.|
|If there’s any post sale question please e-mail at [email protected] or contact with your sales representative.|