SSN5EFS0-EFF8

SSND00EFS011 8-ports 10/100M Fast Ethernet Processing Board with LAN Switch, apply to Huawei OSN1500B, OSN2500, OSN3500, OSN7500.

Working with SSN1EFF8 to provide 8xFE SFP interface.

Maximum uplink bandwidth is 1.25 Gbit/s.

Processes 8xFE services and supports convergence of 60×10 Mbit/s or 6×100 Mbit/s services.

Supports flow classification based on PORT, PORT+VLAN ID, and PORT+VLAN ID+VLAN PRI.

Support 24 VCTRUNKs.

Supports 10BASE-T/100BASE-TX signals when it is used with the ETF8A.

Supports 100BASE-FX signals when it is used with EFF8A. The optical interfaces comply with IEEE802.3u.

Supports the PORT-based transparent transmission EPL services.

Supports PORT+VLAN-based EVPL services that use frame encapsulation formats of MartinioE and stack VLAN.

Supports the point-to-multipoint (P2MP) converging service that is based on Layer 2.

Supports the Layer 2 forwarding function.

Supports switching on the client and SDH sides.

Supports the blacklist that can contain 2K records and static MAC address table that can contain 2K records.

Supports self-learning of the source MAC address. The capacity of MAC address table is 16K

Supports the configuration of the static MAC route.

Supports the query of the dynamic MAC address.

Supports the creation, deletion, and query of the VB.

The maximum number of supported VBs is 16.

The maximum number of logical ports for each VB is 30.

Supports the EPLAN services that are based on the IEEE 802.1d MAC bridge.

Supports EVPLAN virtual bridges.

Supports data isolation based on VB+VLAN.

Supports the setting of a maximum of 4096 VLAN services.

Supports the EVPLAN services that are based on the IEEE 802.1q virtual bridge.

Supports Ethernet II, IEEE 802.3, and IEEE 802.1 q/p formats.

Supports the frame with a length ranging from 64 bytes to 9600 bytes.

Supports the Jumbo frame with a length less than 9600 bytes.

Supports the setting of the packet length, which ranges from 1518 bytes to 9600 bytes.

Support 24xVC-3, or 126xVC-12 +18xVC-3 bound bandwidth.

Supports the GFP-F encapsulation.

Supports the MPLS.

Supports 4k VLANs. The VLAN technology complies with IEEE 802.1q/p.

Supports TPS, not supports BPS, PPS, DLAG.

Support manual link aggregation and load sharing mode that comply with IEEE 802.3ad and IEEE 802.1AX

Products dynamically increases/decreases bandwidth and protects bandwidth comply with ITU-T G.7042 protection schemes.

Support P2P LPT and P2MP LPT. LPT functions comply with ITU-T G.7042.

Supports broadcast packet suppression function and RSTP, which comply with IEEE 802.1w.

Not supports Synchronous Ethernet, IEEE 1588v2.

Support CC, LB, LT tests comply IEEE 802.1ag, and OAM ping comply with Huawei proprietary protocol.

Support OAM auto-discovery, remote loopbacks, fault detection in compliance with IEEE 802.3ah.

Support link performance detection in compliance with IEEE 802.3ah.

Supports selfloop detection in compliance with Huawei proprietary protocol.

Support test frames in Ethernet/GFP bearer mode.

Supports Ethernet performance monitoring at the port level.

Supports the CAR. The granularity is 64 kbit/s.

Support the flow classification based on PORT, PORT++VLAN ID, or PORT+VLAN ID+VLAN PRI.

Supports Protocol enabling, Port aging time.

Not supports Fast leave, Static broadcast entry, Discarding of unknown broadcast packets.

Supports the port-based traffic control function that complies with IEEE 802.3x.

 

SSND00EFS011 is a 8-ports FE service processing board, can be used on Huawei OSN1500B, OSN2500, OSN3500, OSN7500. SSND00EFS011 part number is 03020KHP, model name is SSN5EFS0. SSND00EFS011 don’t have interface on board, it must work with SSN1EFF8 to provide 8 FE optical interface or with SSN1ETF8 to provide 8 FE electrical interface.