4 FE 10/100M Fast Ethernet Processing Board with LAN Switch.
Maximum uplink bandwidth is 1.25 Gbit/s.
Can substitute for the N2EFS4 and N1EFS4.
Supports 24 VCTRUNKs.
Processes 4xFE services.
Supports 10BASE-T/100BASE-TX signals. The optical ports comply with IEEE 802.3u.
Supports Query /Setting of ports status, Query of port types.
Supports PORT-based transparent transmission.
Supports PORT-shared EVPL services.
Supports VCTRUNK-shared EVPL services.
The services are isolated by VLAN tags.
The services are isolated by MPLS tags.
The services are isolated by QinQ tags.
Supports a maximum of 4096 links.
Supports the EPLAN services that are based on the IEEE 802.1d MAC bridge.
Supports switching on the client and SDH sides.
Supports the blacklist that can contain 2K records and static MAC address table that can contain 2K records.
Supports self-learning of source MAC address. The capacity of the MAC address table is 16K.
Supports the configuration of static MAC routes.
Support the query of dynamic MAC addresses.
Maximum number of supported VBs is 16. Maximum number of logical ports for each VB is 30.
Supports data isolation based on VB+VLAN.
Supports the setting of a maximum of 4096 VLAN services.
Supports the EVPLAN services that are based on the IEEE 802.1q virtual bridge.
Support the EVPLAN services that are based on the IEEE 802.1ad provider bridge.
Supports IEEE 802.3, Ethernet II, IEEE 802.1 q/p.
Supports setting of the frame length to a value ranging from 1518 bytes to 9600 bytes.
Supports a jumbo frame with a maximum length of 9600 bytes.
Supports 24xVC-3 or 126xVC-12 + 18xVC-3 bound bandwidth.
Supports GFP-F, not supports HDLC, LAPS encapsulation formats.
Supports MPLS technology.
Supports a total number of 4094 VLANs, which comply with IEEE 802.1q/p.
Not supports TPS, BPS, PPS, DLAG protection schemes.
Support manual link aggregation and load sharing mode that comply with IEEE 802.3ad and IEEE 802.1AX.
Supports LCAS, which increases/decreases bandwidth and protects bandwidth comply with ITU-T G.7042 protection schemes.
Support P2P LPT and P2MP LPT,LPT complies with ITU-T G.7042.
Supports broadcast packet suppression function and RSTP, which comply with IEEE 802.1w.
Not supported Synchronous Ethernet, IEEE 1588v2.
Support CC, LB, LT tests comply with IEEE 802.1ag, and OAM ping comply with Huawei proprietary protocol.
Support OAM auto-discovery, remote loopbacks, fault detection,comply with IEEE 802.3ah.
Support link performance detection comply with IEEE 802.3ah.
Supports selfloop detection in compliance with Huawei proprietary protocol.
Support test frames in Ethernet/GFP bearer mode.
Supports Ethernet performance monitoring at the port level.
Supports the CAR. The granularity is 64 kbit/s.
Support flow classification based on PORT, PORT+VLAN ID, or PORT+VLAN ID+VLAN PRI.
Support the flow classification based on PORT+S-VLAN ID.
Supports Protocol enabling, Port aging time.
Not supports Fast leave, Discarding of unknown broadcast packets, Static broadcast entry IGMP snooping.
Supports the port-based traffic control function that complies with IEEE 802.3x.
Supports port-based and VCTRUNK-based traffic monitoring.
SSND00EFS411 is a four-FE service processing board, which has interfaces on its panel, can be used on Huawei OSN1500B, OSN2500, OSN3500, OSN7500. SSND00EFS411 part number is 03020KHU, model name is SSN3EFS4.
The front panel of the SSND00EFS411 has indicators, interfaces, a bar code.
OSN 1500B: SSND00EFS411 can be installed in slots 11-13.
OSN 2500: When the cross-connect board is CXLLN, SSND00EFS411 can be installed in slots 5–8 and 11–13.
OSN 3500: SSND00EFS411can be installed in slots 1–8 and 11–17.
OSN 7500: SSND00EFS411 can be installed in slots 1–8, 11–18, and 26–31.
|Optical Interface Parameter|
|Nominal bit rate||10 Mbit/s or 100 Mbit/s|
|Line code pattern||Manchester encoding signal (10M) or MLT-3 encoding signal (100M)|
|Specifications of the interface||Complies with IEEE 802.3.|
|Dimensions (mm)||25.4 (W) x 235.2 (D) x 261.4 (H)|
Q: What’s the difference between different functional versions?
A: EFS4 is available in three functional versions, namely, N1, N2 and N3. N3 version also called ND00. N1EFS4 and N2EFS4 are discontinued. Differences are as below:
|Bound bandwidth||12xVC-3, or 63xVC-12 + 9xVC-3||24xVC-3 or 126xVC-12 + 18xVC-3||24xVC-3 or 126xVC-12 + 18xVC-3|
|Maximum uplink bandwidth||622 Mbit/s||1.25 Gbit/s||1.25 Gbit/s|
|Number of VCTRUNKs||Supported 12||Supported 24||Supported 24|
|LPT||Supports P2P LPT||Supports P2P LPT and P2MP LPT||Supports P2P LPT and P2MP LPT|
|ETH OAM||Not supported||Supported||Supported|
|Traffic monitoring||Not supported||Not supported||Supported|
|Ttest frame||Supports test frames in Ethernet bearer mode||Supports test frames in Ethernet/GFP bearer mode.|
Supports test frames in Ethernet/GFP bearer mode
Q: What is the board substitution relation among different versions?
A: N2EFS4 can substitute for the N1EFS4; N3EFS4 can substitute for the N2EFS4 and N1EFS4.
Q: Can I return/exchange board if not compatible with my system?
A: Yes, please tell our sales team your system and main control board version, before your purchase.
Q: The board is new or refurbished?
A: Yes, it is original new, not been used.
Q: What is the lead time for SSND00EFS411 board?
A: In normal condition is 5 days, better to confirm with our sales team before your purchase.
|Thunder-link.com have regular products in stock, and work together with reliable and high efficiency shipment partner, could deliver to our customers worldwide shortly. In normal condition, your cargo would take 3-5 days lead time and inland transportation to your carriers, then takes delivery days as per different delivery method, would be arrived at your destination safely and securely through reliable international carriers. Tracking No. will be provided once delivery out.|
|There are 3 delivery methods as default selection.|
|· FCA China Mainland.|
|Free of charge for FCA China Mainland|
|· FCA Hong Kong.|
|Flat rate 150USD for cargo under 100KG. We can delivery to your appointed address in Hong Kong, like your forwarders address.|
|Please note: |
1, Our warehouses and cargoes are not located in Hong Kong, there are logistic and customs commission charges during China to Hong Kong.
2, If your cargo is small dimension, instead of delivery to you Hong Kong carrier, choosing our DHL service to deliver to your country directly is highly recommended.
|International shipping methods are by express like DHL/ Fedex/ UPS, DHL is default; or by normal airfreight; |
For cargoes under 45kg, DHL is recommended; For cargoes more than 45kg, considering the time-effectiveness, customs clearance convenience, and freight cost, our sales team will provide DHL and normal airfreight cost for your choice.
1, Insurance is not included by default, please tell our sales team if you need a insurance during transportation.2, DHL is door to door service, if you choose normal airfreight, you should collect the cargo at airport; and if there have no airport at your city, you should also responsible for the inland transportation between airport to your place.
|Thunder-link.com accepts variety payment methods. We will constantly upgrade our payment system and provide the most convenient method for our client. The Customer may make payment by any one of the following methods, and Wire Transfer is the regular method in Thunder-link.com.|
|Paying with Wire Transfer|
|You can do from any your local bank. Usually, we will have your payment within 2 to 3 day.|
|All fee (payer & payee) generated by the bank wire transfer should be bear by client. Otherwise, the fee will be deducted from the payment we receive.|
|Paying with Paypal|
|Thunder-link.com offers an alternative secure payment method via PayPal. PayPal does not insist you open an account, making payment by Credit or Debit card even easier. It's advised you do create an account to enable the benefits of signing up with PayPal, such as buyer protection and faster checkout next time without the need to enter your card details. Our invoicing and back order systems with PayPal work differently from our other payment methods. Our returns system is slightly different, we can only refund you for the items rather than swap them. When paying through PayPal the total order amount will be paid for immediately at checkout when you commit to buy. The items will then be dispatched when we process the order as quickly as we can. If items are out of stock we will aim to dispatch them as soon as possible after they arrive here. The same applies for any back orders that are created due to out of stock items within a larger order. Any canceled orders will be refunded as quickly as possible. Any returns will always be charged back to your original payment method.|
|Paying with Western Union|
|When you buy some items in Thunder-link.com, you have the option of paying for them at any participating Western Union location. The Western Union charge that applies to Thunder-link.com is based on the total amount of your transaction.|
|All fee (payer & payee) generated by the bank wire transfer should be paid by client.Otherwise, the fee will be deducted from the payment we receive.|
Paying with Alipay
|Now Alipay is acceptable at Thunder-link.com, if you have and intend to pay by an Alipay account, please contact with our sales team.|
|Please send us the T/T payment advice with date and invoice number by using below email or telephone number.|
|Email to: firstname.lastname@example.org Call to : +852-3062-3083|
|All products are vender original products, we provide new equipment for customers, never been used before. Some scratching or copper rust might be seen on the modules, that may caused by carry, inserting in/out from chassis during our in-stock and pre-delivery testing. In normal condition, the scratching and rust are very slightly. When meet with this situation, a picture will send to you first to obtain your confirmation before delivery to you.|
|Once you bought products from us, we will provide the best post sale service for you. After the shipping out, we will continuously track your cargo until it arrives to your country or region. If there is something wrong during the delivery, we will do our utmost to help you.|
|Generally, all products provided by Thunder-link.com, will come with standard vender like 1 year warranty. During the warranty period, Thunder-link.com will replace any defective Equipment, but the reverse logistics should responsible by buyer, the re-shipment should obey the trade terms of order. If it is unable to locate a suitable replacement, Thunder-link.com will repair the Equipment. If it is unable to do either, Thunder-link.com will refund the purchase price to Buyer.|
|This warranty does not apply to any failure of the Equipment as a result of misuse, abuse, accident, neglect or mishandling, lack of proper maintenance, environmental factors, improper installation or configuration, flood, fire or other natural disasters, physical damage, electrical issues such as lightning, power surges or incorrect electrical voltages, or improper modifications.|
|This warranty is only valid for the original purchaser of the Equipment (“Buyer”).|
But if products fail during warranty time, please contact your sales representative, or email to
email@example.com to verify your problem and enquire solutions for the failed products. If the problem
still can't be fixed by remote support trouble shooting methods i.e. email or phone support, then return procedure
|See details when you start the return procedure to return policy.|
|If there’s any post sale question please e-mail at firstname.lastname@example.org or contact with your sales representative.|