|This topic describes how to install the U2000 LCT.|
|1 Requirements and Software list|
|1.1 Configuration requirements for U2000 LCT software|
|1.1.1 Windows 7 Professional 64bit + MSSQL Server 2008 Express 64bit (recommended configuration)|
1.1.2 Windows 7 Professional 32bit + MSSQL Server 2008 Express 32bit (compatible configuration)
1.1.3 Windows XP Professional + MSDE2000A (compatible configuration)
|1.2 Installation Software list|
1.2.1 Windows 7 Professional 64bit
|1.2.2 Windows 7 Professional 32bit|
1.2.3 Windows XP Professional
|2 Installing the U2000 LCT|
|After preparations are complete, you can install the U2000 LCT|
|2.1 Performing the Pre-installation Check|
|This topic describes the checks that need to be performed before you install the U2000 LCT.|
|Checking Hardware and Software Configurations.|
As Windows XP Professional SP3 for example, to check whether a patch has been installed, right-click My Computer and choose Properties from the shortcut menu. If Service Pack x is displayed in the System area on the General tab page, the Service Pack x patch has been installed.
|Step 3 Check whether the U2000 has been installed.|
The U2000 LCT and U2000 cannot be installed on the same OS. If so, the U2000 LCT fails to be used properly.
|1. Check whether the U2000 Client, U2000 System Monitor, U2000 Server, U2000 NMS Maintenance Suite, and NE Software Management shortcut icons are displayed on the Windows desktop.|
2. Check whether the U2000 server installation path, for example, D:\oss, exists.
|Step 4 Check that a database has been installed.|
|1. Choose Start > All Programs.|
2. Check whether the Microsoft SQL Server 2008 or Microsoft SQL Server program exists.
|If the program exists, the database has been installed.|
|If the SQL Server 2008, SQL Server 2000 or MSDE 2000A database has not been installed, a database will be installed along with the U2000 LCT.|
If the SQL Server 2008, SQL Server 2000 or MSDE 2000A database has been installed and data in the database is sorted in binary mode, the database can be reused for the U2000 LCT in Step 10.
If data in the database is not sorted in binary mode, the database cannot be reused for the U2000 LCT and you must uninstall the database. For details, see the other guide.
|To check whether data in the SQL Server 2000 or MSDE 2000A is sorted in binary mode.|
perform the following steps:
1. Choose Start > Run. In the Run dialog box, enter the cmd command and click OK to start the CLI.2. Run the following command: C:\> isql -Usa -Psa_password -Sdatabase_name 1> sp_helpsort 2> go
If the command output contains binary sort, data in the database is sorted in binary mode.
Step 5 Check that the available space on either disk C or disk which LCT will be installed is larger than 10 GB.
Step 6 Check that current language for non-Unicode programs is English (United States).
|2.2 Installing the U2000 LCT and Database|
|This topic describes how to install the U2000 LCT.|
The name of all software installation directories can contain only letters, numbers, andunderscores. The installation fails if a name contains spaces, parentheses, or Chinese characters.
Do not change the system time during installation. Otherwise, the installation fails.
Ensure that the database is running if the database is already installed.
Ensure that the U2000 is not installed on the OS. For details, see Step 3.
Step 1 Log in to Windows OS as the administrator.
Step 2 Run the install.bat file to start U2000 LCT installation, as follows:
When you run a .bat file on Windows 7, a user account control dialog box may be displayed. In this case,click Yes to allow the program to make changes to the computer.
|Installation with a software package.|
|1. Decompress all installation packages into the same directory. Use the WinRAR software for an example. Select all the packages, right-click and choose Extract Here from the shortcut menu.|
2. Double-click the install.bat file in the installation package path. The iManager U2000 LCT Network Management System Installation dialog box will be displayed.
|Step 3 Click Transmission LCT. The dialog box for setting the installation environment is displayed.Wait until the Copyright dialog box is displayed.|
|Step 4 Click I accept these terms and click Next. The Select Language dialog box will be displayed.|
|Step 5 Select English and click Next. The Select Component dialog box will be displayed.|
|Step 6 Select relevant components and click Next. The Configure Server dialog box will be displayed.|
It is recommended that you select all components.
|Step 7 Click Next. The Select Version Style dialog box will be displayed.|
If the d:\oss path does not exist, a confirmation dialog box is displayed. Click Yes. The system creates the d:\oss path automatically.If the d:\oss path exists and contains files or directories, an error is displayed. In this case, clear this directory manually first.
The installation path can contain only letters, numbers, and underscores.
|Step 8 Select the style as required, such as Default Style. Then, click Next.|
An example of the differences between the two styles: For default style, alarms come in the following four levels in descending order of severity: Critical, Major, Minor and Warning. For North America style, alarms come in the following five levels in descending order of severity: Critical, Major, Minor, Not Alarmed and Not Reported.
|Step 9 Select the timeslot mode as required, for example Sequential mode (ITU-T G.707). Then, click Next. The Configure Database dialog box will be displayed.|
The Sequential mode is the international standard mode and is recommended.
|Step 10 Set database parameters and click Next.|
If the OS is Windows 7 Professional 64-bit or Windows 7 Professional 32bit, the Microsoft SQL Server 2008 database needs to be installed. For detailed settings of the NMS database user and database server, see next table.
|Parameters for the Microsoft SQL Server 2008 database|
|If the OS is Windows XP Professional, the Microsoft SQL Server 2000 database needs to be installed. For details on setting parameters for the NMS database user and database server, see next table.|
|Parameters of the Microsoft SQL Server 2000 database|
|Step 11 Verify all pre-installation check items and click Next. The Confirm Installation Information dialog box is displayed.|
Step 12 Confirm installation information and click Next. An installation progress dialog box is displayed.
By default, the U2000 LCT can automatically expand the database based on growth parameters that are set during database creation. Ensure that the available disk space is greater than the maximum size that the database can grow before installation. If the available disk space is smaller than the maximum size that the database can grow, a message in red fonts indicating insufficient available disk space is displayed.During installation, do not leave the PC idle for a long time. Otherwise, the PC enters the hibernation state and the installation fails.
Step 13 Click Finish.
|Step 14 Click Yes to restart the OS.|
|Regarding U2000 LCT acquisition and more questions, please contact us at [email protected]|