24x1000BASE-T PoE+ 4xGE SFP combo 4x10GE SFP+ 1xAC power fixed
3-Level Quality Control x
We provide 3-Level Quality Control procedure: 1-Level inspection; 2-Level In-stock test; 3-Level 24 hour pre-delivery and 1 year warranty. Learn More
8-Year Gold Supplier x
Thunder-link.com, founded in 2011, a leading professional Huawei network hardware and solution provider, service over 100 VIP customers from 50 countries in 8 year. Learn More
Huawei S5320-28X-PWR-SI-AC switch, 24-ports 1000BASE-T PoE+, including 4-ports GE SFP combo, 4-ports 10GE SFP+
With 1 AC power fixed
No extension slots
Layer 3 Ethernet switch
Forwarding performance: 96 Mpps
Switching capacity: 336Gbps
16K MAC address entries
The S5320-SI series are gigabit Layer 3 Ethernet switches based on new generation of high-performance hardware and Huawei Versatile Routing Platform (VRP). It provides a large capacity, high-density GE interfaces, and 10GE uplink interfaces. With extensive service features and IPv6 forwarding capabilities,the S5320-SI is applicable to various scenarios. For example, it can be used as an access or aggregation switch on campus networks or an access switch in data centers. The S5320-SI integrates many advanced technologies in terms of reliability, security, and energy saving. It employs simple and convenient means of installation and maintenance to reduce customers' O&M cost and help enterprise customers build a next-generation IT network.
|Fixed port||24 Ethernet 10/100/1000 PoE+ ports,4 of which are dual-purpose SFP ports, 4* 10 Gig SFP+|
MAC address table
|IEEE 802.1d compliance|
|16K MAC address entries|
|MAC address learning and aging|
|Static, dynamic, and blackhole MAC address entries|
|Packet filtering based on source MAC addresses|
|Guest VLAN and voice VLAN|
|VLAN assignment based on MAC addresses, protocols, IP subnets, policies, and ports|
|1:1 and N:1 VLAN mapping|
|Ring protection||RRPP ring topology and RRPP multi-instance|
|Smart Link tree topology and Smart Link multi-instance, providing millisecond-level protection switchover|
|Smart Ethernet Protection (SEP),G.8032 Ethernet Ring Protection Switching (ERPS)|
|STP (IEEE 802.1d), RSTP (IEEE 802.1w), and MSTP (IEEE 802.1s)|
|BPDU protection, root protection, and loop protection; BPDU tunnel|
|MPLS||MPLS L3VPN, MPLS L2VPN(VPWS/VPLS), MPLS-TE, MPLS QOS|
|IP routing||Static route, RIPv1, RIPv2, RIPng, ECMP, OSFP, OSPFv3,BGP, BGP4+, ISIS, ISISv6|
|IPv6 features||Neighbor Discovery (ND)|
|Path maximum transmission unit (PMTU)|
|IPv6 Ping, IPv6 Tracert, and IPv6 Telnet|
|6 to4 tunnel, ISATAP tunnel, and manually configur ed tunnel|
|ACLs based on source IPv6 addresses, destination IPv6 addresses, Layer 4 ports, or protocol types|
|Multicast Listener Discovery (MLD) v1/v2 snooping|
|Multicast forwarding||IGMP v1/v2/v3 snooping and IGMP fast leave|
|Multicast forwarding in a VLAN and multicast replication between VLANs|
|Multicast load balancing among member ports of a trunk|
|Port-based multicast traffic statistics|
|QoS/ACL||Rate limiting on packets sent and received by an interface|
|Port-based traffic policing and two-rate three-color CAR|
|Eight queues on each port|
|WRR, DRR, PQ, WRR+PQ, and DRR+PQ queue scheduling algorithms|
|Re-marking of the 802.1p priority and DSCP priority|
|Packet filtering at Layer 2 to Layer 4, filtering out invalid frames based on the source MAC address, |
destination MAC address, source IP address, destination IP address, port number,protocol type, and VLAN I
|Rate limiting in each queue and traffic shaping on ports|
|User privilege management and password protection|
|DoS attack defense, ARP attack defense, and ICMP attack defense|
|Binding of the IP address, MAC address, interface, and VLAN|
|Port isolation, port security, and sticky MAC|
|Blackhole MAC address entries|
|Limit on the number of learned MAC addresses|
|802.1x authentication and limit on the number of users on an interface|
|AAA authentication, RADIUS authentication, HWTACACS+ authentication, and NAC|
|Hypertext Transfer Protocol Secure (HTTPS)|
|CPU defense, Blacklist and whitelist|
|Reliability||RRPP ring topology and RRPP multi-instance|
|Smart Link tree topology and Smart Link multi-instance, providing the millisecond-level protection switchover|
|STP(IEEE 802.1d), RSTP(IEEE 802.1w), and MSTP(IEEE 802.1s)|
|BPDU protection, root protection, and loop protection|
|MAC Forced Forwarding (MFF)|
|Virtual cable test|
|Port mirroring and RSPAN (remote port mirroring)|
|Remote configuration and maintenance by using Telnet|
|System logs and alarms of different levels|
|GVRP, MUX VLAN|
|Operating environment||Operating temperature: 0 O C–50 O C (long term); -5 O C–55 O C (short term)|
Relative humidity: 10%–90% (non-condensing
Rated voltage range: 100 V to 240 V AC, 50/60 Hz
Maximum voltage range: 90 V to 264 V AC, 47/63 Hz
Rated voltage range: –48 V to –60 V, DC
Maximum voltage range: –36 V to –72 V, DC
|Dimensions (mm)||442 (W) x 420 (D)x 44.4 (H)|
|Front power input||Yes|
with PD: <913W
Q: What is the difference among S5300 LI, S5300 SI, S5300 EI?
|IPv4 Routing Protocol||Static route||Static route/RIP||Static route/RIP/OSPF|
|IPv6 Routing Protocol||Static route||Static route/RIPng||Static route/RIPng/OSPFv3|
/BGP4+/ISIS for IPv6
/ISIS for IPv6
|Multicast||IGMP snooping/MLD snooping||IGMP Snooping/MLD Snooping||IGMP Snooping/MLD Snooping|
|IGMP Snooping/MLD Snooping/IGMP/MLD|
|MPLS||Not supported||Not supported||MPLS LDP/MPLS TE/MPLS VPN|
Note:Only the S5310-EI supports these functions
|MPLS LDP/MPLS TE/MPLS VPN|
|OAM/BFD||Software level||Software level||Software level||Hardware level|
|Traffic analysis||sFlow||Not supported||sFlow||sFlow|
|iStack||Stacking through service ports|
Note: The S5300-10P-LI-AC, S5306TP-LI-AC, S5300-28P-LI-BAT, and S5300-28P-LI-24S-BAT do not support stacking.
|Stacking through stack cards||S5300EI/S5320EI: stacking through stack cards|
S5310EI: stacking through service ports
|Stacking through service ports|
Q: Does the S5300 support blackhole routes?
A: Earlier versions of S5300 V100R005 do not support blackhole routes.The S5300 V100R005, and S5300 V100R006 and later versions support blackhole routes. The following command configures a blackhole route: ip route-static ip-address mask NULL 0
Q: Do the S5300 support the optical Modules of other Vendors?
A: The S5300 can use only the certificated optical modules. If an uncertificated optical module is used, an error may occur and Huawei is not responsible for it.
Q: What versions does IGMP Have? Which versions do S5300 support?
A: The IGMP protocol has three versions: IGMPv1, IGMPv2, and IGMPv3. V100R002 and earlier versions do not support IGMPv3, whereas later versions support all the three versions.Only supported by S5300EI, S5310EI, S5320EI, and S5300HI.
Q: Do I need to buy power supply for S5320-28X-PWR-SI-AC?
A: No, one AC power module is configured by default.
Q: Can I use compatible SFP/SFP+ module on Huawei S5320 switch?
A:Yes, but the switch may generate alarm, however, it will not affect normal use.
Q: Can I get technical support from Thunder-link.com if we purchase S5320-28X-PWR-SI-AC from you?
A: Yes, Thunder-link.com has experienced technical team on Huawei switches, however, you may need to purchase technical support service from us as by default we only provide one year hardware warranty.