24xGE SFP 8xGE SFP combo 4x10GE SFP+ 1xAC power module
3-Level Quality Control x
We provide 3-Level Quality Control procedure: 1-Level inspection; 2-Level In-stock test; 3-Level 24 hour pre-delivery and 1 year warranty. Learn More
8-Year Gold Supplier x
Thunder-link.com, founded in 2011, a leading professional Huawei network hardware and solution provider, service over 100 VIP customers from 50 countries in 8 year. Learn More
Huawei S5320-32C-HI-24S-AC switch, 24-ports GE SFP, including 8-ports GE SFP combo, 4-ports 10GE SFP+
With 2 power slots, 1 AC power module included
No extension slots
Layer 3 Ethernet switch
Forwarding performance: 168Mpps
Switching capacity: 598Gbps
16K MAC address entries
Huawei S5320-HI series are advanced Gigabit Ethernet switches that provide rich agile features. The switches are developed based on Huawei Versatile Routing Platform (VRP), comprehensive VPN tunnel solutions, various security control methods, intelligent deployment, and simple operation & maintenance. The S5320-HI switches are the best choices for the branches of high-quality large- and middle-sized campus networks, the core layer of small-sized campus networks, and the access layer of data center networks.
|Fixed port||24 Gig SFP,8 of which are dual-purpose 10/100/1000 or SFP ports, 4 10 Gig SFP+ ports|
|Forwarding performance||168 Mpps|
One port extended slot with optional subcard 4x10GE SFP+
One slot reserved for the stack card
MAC address table
|128K MAC address entries|
|MAC address learning and aging|
|Static, dynamic, and blackhole MAC address entries|
|Packet filtering based on source MAC addresses|
|Guest VLAN and voice VLAN|
|VLAN assignment based on MAC addresses, protocols, IP subnets, policies, and ports|
|IP routing||Static routes, RIP v1/2, RIPng, OSPF, OSPFv3, IS-IS, IS-ISv6, BGP, BGP4+, ECMP, |
|IPv6 features||Neighbor Discovery (ND)|
|Path maximum transmission unit (PMTU)|
|IPv6 Ping, IPv6 Tracert, and IPv6 Telnet|
|ACLs based on source IPv6 addresses, destination IPv6 addresses, Layer 4 ports|
or protocol types
|Multicast Listener Discovery (MLD) v1/v2 snooping|
|Multicast||IGMP v1/v2/v3 snooping and IGMP fast leave|
|Multicast forwarding in a VLAN and multicast replication between VLANs|
|Multicast load balancing among member ports of a trunk|
|Port-based multicast traffic statistics collection|
|IGMPv1/v2/v3, Protocol Independent Multicast Sparse Mode (PIM-SM), and Protocol Independent Protocol Independent Multicast Source-Specific Multicast (PIM-SSM)|
|Multicast Source Discovery Protocol (MSDP)|
|QoS/ACL||Rate limitation in the inbound and outbound directions of a port|
|Port-based traffic policing and two-rate and three-color CAR|
|Eight queues per port|
|DRR, SP and DRR+SP queue scheduling algorithms|
|Re-marking of the 802.1p priority and DSCP fields of packets|
Packet filtering on Layer 2 to Layer 4, filtering out invalid fr ames based on the source MAC address, destination MAC address, source IP address, destination IP address, TCP/UDP source/destination port number, protocol number, or VLAN
|Queue-based rate limitation and shaping on ports|
|Security features||Hierarchical user management and password protection|
|DoS attack defense, ARP attack defense, and ICMP attack defense|
|Binding of the IP address, MAC address, interface number, and VLAN ID of a user|
|Port isolation, port security, and sticky MAC|
|MAC Forced Forwarding (MFF)|
|Blackhole MAC address entries|
|Limit on the number of learned MAC addresses|
|IEEE 802.1x authentication and the limit on the number of users on an interface|
|AAA authentication, RADIUS authentication, HWTACACS+ authentication, and NAC SSH v2.0|
|Hypertext Transfer Protocol Secure (HTTPS)|
|CPU defense; Blacklist and whitelist; MACSec ready|
|DHCP Relay, DHCP Server, DHCP Snooping, DHCP Client, DHCP Security|
|Reliability||RRPP ring topology and RRPP multi-instance|
|Smart Link tree topology and Smart Link multi-instance, providing the millisecond-level protection switchover|
|G.8032 Ethernet Ring Protection Switching (ERPS)|
|BFD for OSPF, BFD for IS-IS, BFD for VRRP, and BFD for PIM|
|BPDU protection, root protection, and loop protection|
Y.1731 performance monitoring
|Virtual cable test, SNMP v1/v2c/v3, RMON|
|Network management system (NMS) and Web management|
|System logs and multi-level alarms|
|802.3az EEE, GVRP, MUX VLAN|
|Dying Gasp upon power-off|
|Interoperability||VLAN-Based Spanning Tree (VBST), working with PVST, PVST+, and RPVST|
|Operating environment||Operating temperature:|
0-1800 m altitude: 0-45℃
AC rated voltage: 100 V AC to 240 V AC, 50~60 Hz
AC Maximum voltage range: 90 V AC to 264 V AC, 47~63 Hz
DC rated voltage: -48V DC~-60V DC
DC Maximum voltage range: -38.4V DC~-72V DC
|Dimensions (mm)||442 (W) x 420 (D)x 44.4 (H)|
|Typical power consumption||<172.7W|
Q: What is the difference among S5300 LI, S5300 SI, S5300 EI, S5300 HI?
|IPv4 Routing Protocol||Static route||Static route/RIP||Static route/RIP/OSPF|
|IPv6 Routing Protocol||Static route||Static route/RIPng||Static route/RIPng/OSPFv3|
/BGP4+/ISIS for IPv6
/ISIS for IPv6
|Multicast||IGMP snooping/MLD snooping||IGMP Snooping/MLD Snooping||IGMP Snooping/MLD Snooping|
|IGMP Snooping/MLD Snooping/IGMP/MLD|
|MPLS||Not supported||Not supported||MPLS LDP/MPLS TE/MPLS VPN|
Note:Only the S5310-EI supports these functions
|MPLS LDP/MPLS TE/MPLS VPN|
|OAM/BFD||Software level||Software level||Software level||Hardware level|
|Traffic analysis||sFlow||Not supported||sFlow||sFlow|
|iStack||Stacking through service ports|
Note: The S5300-10P-LI-AC, S5306TP-LI-AC, S5300-28P-LI-BAT, and S5300-28P-LI-24S-BAT do not support stacking.
|Stacking through stack cards||S5300EI/S5320EI: stacking through stack cards|
S5310EI: stacking through service ports
|Stacking through service ports|
Q: Does the S5300 Support Blackhole Routes?
A: Earlier versions of S5300 V100R005 do not support blackhole routes.The S5300 V100R005, and S5300 V100R006 and later versions support blackhole routes. The following command configures a blackhole route: ip route-static ip-address mask NULL 0
Q: Do the S5300 Support the Optical Modules of Other Vendors?
A: The S5300 can use only the certificated optical modules. If an uncertificated optical module is used, an error may occur and Huawei is not responsible for it.
Q: What Versions Does IGMP Have? Which Versions Do S5300 Support?
A: The IGMP protocol has three versions: IGMPv1, IGMPv2, and IGMPv3. V100R002 and earlier versions do not support IGMPv3, whereas later versions support all the three versions.Only supported by S5300EI, S5310EI, S5320EI, and S5300HI.
Q: Do I need to buy power supply for S5320-32C-HI-24S-AC?
A: No, one AC power module is configured by default.
Q: How many slots S5320-32C-HI-24S-AC support?
A: Two extended slot that one port extended slot with optional subcard 4x10GE SFP+, one slot reserved for the stack card
Q: Can Thunder-link.com provide MIB for Huawei S5320 switch?
A: Yes, you may contact our sales person.
Q: Can I use compatible SFP/SFP+ module on Huawei S5320 switch?
A:Yes, but the switch may generate alarm, however, it will not affect normal use.
Q: Can I get technical support from Thunder-link.com if we purchase S5320-32C-HI-24S-AC from you?
A: Yes, Thunder-link.com has experienced technical team on Huawei switches, however, you may need to purchase technical support service from us as by default we only provide one year hardware warranty.