28x1000BASE-T 4xGE SFP combo 4x10GE SFP+ 1xAC power module
3-Level Quality Control x
We provide 3-Level Quality Control procedure: 1-Level inspection; 2-Level In-stock test; 3-Level 24 hour pre-delivery and 1 year warranty. Learn More
8-Year Gold Supplier x
Thunder-link.com, founded in 2011, a leading professional Huawei network hardware and solution provider, service over 100 VIP customers from 50 countries in 8 year. Learn More
Huawei S5320-36C-EI-AC switch, with 28-ports 1000BASE-T, 4-ports GE SFP combo, 4-ports 10GE SFP+
With 2 power slots, 1 AC power module included
With 1 extension slot
Layer 3 Ethernet switch
Forwarding performance: 132Mpps
Switching capacity: 598Gbps
64K MAC address entries
Huawei S5320-EI series enhanced gigabit Ethernet switches is designed for high-bandwidth access and Ethernet aggregation. S5320-EI provides a large switching capacity and high-density GE ports to implement 10 Gbit/s upstream transmissions. S5320-EI is for use in various network scenarios: can be an edge device on the MAN, an access or aggregation switch on a campus network, a gigabit access switch in an Internet data center (IDC), or a desktop switch to provide 1000 Mbit/s access for terminals.
|Fixed port||28x10/100/1000Base-T Ethernet ports, 4x combo 1000Base-X SFP ports, 4x10G SFP+ ports|
One extended slot that supports an uplink interface card or private stack card
MAC address table
|64K MAC address entries|
|MAC address learning and aging|
|Static, dynamic, and blackhole MAC address entries|
|Packet filtering based on source MAC addresses|
|Guest VLAN and voice VLAN|
|VLAN assignment based on MAC addresses, protocols, IP subnets, policies, and ports|
|1:1 and N:1 VLAN mapping|
|VLAN-based transparent transmission of protocol packets|
|Ring protection||RRPP ring topology and RRPP multi-instance|
|Smart Link tree topology and Smart Link multi-instance, providing millisecond-level protection switchover|
|Smart Ethernet Protection (SEP),G.8032 Ethernet Ring Protection Switching (ERPS)|
|STP (IEEE 802.1d), RSTP (IEEE 802.1w), and MSTP (IEEE 802.1s)|
|BPDU protection, root protection, and loop protection; BPDU tunnel|
|MPLS||MPLS L3VPN, MPLS L2VPN(VPWS/VPLS), MPLS-TE, MPLS QOS|
|IP routing||Static routing, RIPv1/2, RIPng, OSPF, OSPFv3, IS-IS, IS-ISv6, BGP, BGP4+, ECMP, and policy-based|
|IPv6 features||Neighbor Discovery (ND)|
|Path maximum transmission unit (PMTU)|
|IPv6 Ping, IPv6 Tracert, and IPv6 Telnet|
|6 to4 tunnel, ISATAP tunnel, and manually configur ed tunnel|
|ACLs based on source IPv6 addresses, destination IPv6 addresses, Layer 4 ports, or protocol types|
|Multicast Listener Discovery (MLD) v1/v2 snooping|
|Multicast forwarding||IGMP v1/v2/v3 snooping and IGMP fast leave|
|Multicast forwarding in a VLAN and multicast replication between VLANs|
|Multicast load splitting among trunk member ports|
|Layer 2 multicast control|
|Port-based multicast traffic statistics collection|
|IGMPv1/v2/v3, Protocol Independent Multicast Sparse Mode (PIM-SM), and Protocol Independent|
|Multicast Dense Mode (PIM-DM), and Protocol Independent Multicast Source-Specific Multicast (PIM-SSM)|
|Multicast Source Discovery Protocol (MSDP)|
|QoS/ACL||Inbound and outbound traffic rate limiting on a port|
|Broadcast storm control|
|Port-based traffic policing and two-rate and three-color CAR|
|Eight queues per port,Weighted round robin (WRR), deficit round robin (DRR), strict priority (SP), WRR+SP, and DRR+SP queue scheduling algorithms|
|Weighted random early detection (WRED)|
|Re-marking of the 802.1p priority and DSCP value of packets|
|Packet filtering based on Layer 2 to Layer 4 information, includi ng source MAC addresses, destination MAC addresses, source IP addresses, destination IP addresses, TCP/UCD source/destination ports, protocol types, and VLAN IDs|
|Per queue rate limiting and interface traffic shaping|
|1:1,N:1,N:4 port mirroring; VLAN mirroring|
|Hierarchical user management and password protection|
|DoS attack defense, ARP attack defense, and ICMP attack defense|
|Binding of the IP address, MAC address, interface number, and VLAN ID of a user|
|Port isolation, port security, and sticky MAC|
|MAC Forced Forwarding (MFF)|
|Blackhole MAC address entries|
|Limit on the number of learned MAC addresses|
|IEEE 802.1x authentication and the limit on the number of users on an interface|
|AAA authentication, RADIUS authentication, HWTACACS+ authentication, and NAC SSH v2.0|
|Hypertext Transfer Protocol Secure (HTTPS)|
|CPU defense; Blacklist and whitelist|
|Access security||DHCP Relay, DHCP Server, DHCP Snooping, DHCP Client, DHCP Security|
|Up to 64 trunk groups|
|Up to 8 member interfaces in each trunk group|
|Reliability||Ethernet OAM (IEEE 802.3ah and 802.1ag)|
|ITU-Y.1731; BFD for BGP/IS-IS/OSPF/static route|
|iStack, Virtual cable test, SNMP v1/v2c/v3, RMON/RMON2|
|Web-based network management system|
|System logs and multi-level alarms|
|SCP (Secure Copy Protocol), TFTP, FTP|
|Store dual software images and configuration files|
|802.3az Energy Efficient Ethernet (EEE)|
|Operating environment||Operating temperature:|
0-1800 m altitude: 0-45℃
1800-5000m altitude: The operating temperature reduces by 1℃ every time the
altitude increases by 220m.
Relative humidity: 5% to 95% (noncondensing)
Rated voltage range: 100 V to 240 V A C, 50/60 Hz
Maximum voltage range: 90 to 264 V AC, 47/63 Hz
|Dimensions (mm)||442 (W) x 420 (D)x 43.6 (H)|
|Front power input||NO|
Q: What is the difference among S5300 LI, S5300 SI, S5300 EI?
|IPv4 Routing Protocol||Static route||Static route/RIP||Static route/RIP/OSPF|
|IPv6 Routing Protocol||Static route||Static route/RIPng||Static route/RIPng/OSPFv3|
/BGP4+/ISIS for IPv6
/ISIS for IPv6
|Multicast||IGMP snooping/MLD snooping||IGMP Snooping/MLD Snooping||IGMP Snooping/MLD Snooping|
|IGMP Snooping/MLD Snooping/IGMP/MLD|
|MPLS||Not supported||Not supported||MPLS LDP/MPLS TE/MPLS VPN|
Note:Only the S5310-EI supports these functions
|MPLS LDP/MPLS TE/MPLS VPN|
|OAM/BFD||Software level||Software level||Software level||Hardware level|
|Traffic analysis||sFlow||Not supported||sFlow||sFlow|
|iStack||Stacking through service ports|
Note: The S5300-10P-LI-AC, S5306TP-LI-AC, S5300-28P-LI-BAT, and S5300-28P-LI-24S-BAT do not support stacking.
|Stacking through stack cards||S5300EI/S5320EI: stacking through stack cards|
S5310EI: stacking through service ports
|Stacking through service ports|
Q: Does the S5300 support blackhole routes?
A: Earlier versions of S5300 V100R005 do not support blackhole routes.The S5300 V100R005, and S5300 V100R006 and later versions support blackhole routes. The following command configures a blackhole route: ip route-static ip-address mask NULL 0
Q: Do the S5300 support the optical Modules of other Vendors?
A: The S5300 can use only the certificated optical modules. If an uncertificated optical module is used, an error may occur and Huawei is not responsible for it.
Q: Do I need to buy power supply for S5320-36C-EI-AC?
A: No, one AC power module is configured by default.
Q: What versions does IGMP Have? Which versions do S5300 support?
A: The IGMP protocol has three versions: IGMPv1, IGMPv2, and IGMPv3. V100R002 and earlier versions do not support IGMPv3, whereas later versions support all the three versions.Only supported by S5300EI, S5310EI, S5320EI, and S5300HI.
Q: Can I use compatible SFP/SFP+ module on Huawei S5320 switch?
A:Yes, but the switch may generate alarm, however, it will not affect normal use.
Q: Can I get technical support from Thunder-link.com if we purchase S5320-36C-EI-AC from you?
A: Yes, Thunder-link.com has experienced technical team on Huawei switches, however, you may need to purchase technical support service from us as by default we only provide one year hardware warranty.