My Cart

Mini Cart

SSN1SLD16(S-16.1,LC)

SSN1SLD16(S-16.1,LC)

PN: 03030FVH
RFQ
Huawei OSN3500 7500 2-port STM-16 2.5G optical interface board SSN1SLD1602 equipped with 2 S-16.1 15km SFP module
- +
Hardware Tested

Hardware Tested x

In order to avoid hardware malfunction, each equipment will be strictly tested before delivery and the test report will be packed inside equipment and delivered together.Learn More

Hardware Compatibility

Hardware Compatibility x

Backed up by our experienced pre-sales support team, and volume documentation, to avoid purchasing incompatible hardware.

Software Compatibility

Software Compatibility x

Software compatibility test between active/standby system board, main control board and service board, mother/sub-card; system commissioning test to prevent all software conflicts.

Firmware Upgrades

Firmware Upgrades x

Firmware upgrades allow our customers to utilize the latest features and security enhancements that simply make the devices to operate proficiently.Learn More

Overview

2×STM-16 Optical Interface Board(S-16.1,LC)

Apply to Huawei OSN 3500, OSN 7500 equipment to transmit and receive 2×STM-16 optical signals, at transit 2~15km.

Supports the detection and query of the information about the optical module.

Support the ALS function. The optical interface supports the setting of the on/off state of a laser.

Supports the usage and detection of the SFP optical module.

Supports the VC-12, VC-3, VC-4 services and VC-4-4c, VC-4-8c, VC-4-16c concatenation services.

Supports the transparent transmission and termination of the path overheads.

Supports the setting and query of the J0, J1, J2, and C2 bytes.

Supports one or two channels of ECC communication.

Supports the time synchronization feature and transmission of the time information by using the section overhead bytes.

Supports the Two-fiber ring MSP, Four-fiber ring MSP, Linear MSP, SNCP, SNCMP, SNCTP.

Supports the fiber-shared virtual trail protection.

Supports the fiber-shared MSP and processes four sets of K bytes

Supports a maximum of four MSP rings.

Supports inloops and outloops at optical interfaces.

Supports inloops and outloops on VC-4 paths.

Supports warm resets and cold resets. The warm reset does not affect services.

Supports the query of the manufacturing information of the board.

Supports the in-service loading of the FPGA.

Supports the upgrade of the board software without affecting services.

Supports the press-to-collect function in fault data collection.

 

SSN1SLD16 is a 2-ports STM-16 optical interface board, can be used on Huawei OSN3500, OSN7500. SSN1SLD16(S-16.1,LC) part number is 03030FVH, model name is SSN1SLD1602.SSN1SLD16(S-16.1,LC) comes with 2 unit S-16.1 SFP module, transmission distance is 15km. SFP module is swappable to perform different transmission distance.


Tech Specs
Front Panel

The number code that follows the board name in the bar code is the feature code of the board. The feature code of the SSN1SLD16(S-16.1,LC) indicates the type of optical interface.

Valid slot
OSN 3500: When the cross-connect boards are IXCS and SXCA: the SSN1SLD16(S-16.1,LC) can be installed in slots 7,8,11,12.
Feature Code
The feature code of the SSN1SLD16(S-16.1,LC) indicates the type of optical interface.
Board Feature Code Type of Optical Interface
SSN1SLD1602 02 S-16.1
Optical interface parameters
Parameter Value
Nominal bit rate 2488320 kbit/s
Line code pattern NRZ
Application code S-16.1
Transmission distance (km) 2 to 15
Type of fiber Single-mode LC
Operating wavelength range (nm) 1260 to 1360
Launched optical power range (dBm) -5 to 0
Receiver sensitivity (dBm) -18
Minimum overload (dBm) 0
Maximum -20 dB spectral width (nm) 1
Minimum extinction ratio (dB) 8.2
Minimum side mode suppression ratio (dB) 30
Mechanical Specifications
Dimensions (mm) 25.4 (W) x 235.2 (D) x 261.4 (H)
Weight (kg) 0.9

 

Q&A

Q: What the difference between different functional version? 

A: The SLD16 is available in one functional version, namely, N1.


Q: What is the difference between different function code?

A:

BoardFeature CodeOptical InterfaceTransmission Distance
SSN1SLD160101I-162km
SSN1SLD160202S-16.115km
SSN1SLD160303L-16.140km
SSN1SLD160404L-16.280km


Q: Can I change SFP module to reach longer transmission distance?

A: Yes, you can, please contact thunder-link.com sales team, for available SFP module and cost.


Q: Can I equip different specification SFP module on different port, to perform different transmission distance for each port?

A: Yes, you can, but that not recommended.


Q: Can I use compatible SFP module on SSN1SLD16(I-16.1,LC) board?

A: Yes, you can, the board might generate alarm, but it won’t affect use.


Q: Can I return/exchange board if not compatible with my system?

A: Yes, please tell our sales team your system and main control board version, before your purchase.


Q: The board is new or refurbished? 

A: Yes, it is original new, not been used.


Q: Do you sell SFP module separately? 

A: Yes, we do.


Q: What is the lead time for SSN1SLD16(I-16.1,LC) board? 

A: In normal condition is 5days, better to confirm with our sales team before your purchase.

Reviews
Write Your Own Review
You're reviewing:SSN1SLD16(S-16.1,LC)
Your Rating:
Why Thunder-link.com
  • 9 Years Experience

  • Premium Quality GuaranteedValue over price

  • Value over price

  • Tailored Technical Support

  • One Stop Solution

  • Official Document Resource

  • 1 Year Warranty Guaranteed

  • Fast Global Shipping

  • Flexible Payment