4xSTM-1 40km Optical Interface Board SSN1SLQ1A11 L-1.1
3-Level Quality Control x
We provide 3-Level Quality Control procedure: 1-Level inspection; 2-Level In-stock test; 3-Level 24 hour pre-delivery and 1 year warranty. Learn More
8-Year Gold Supplier x
Thunder-link.com, founded in 2011, a leading professional Huawei network hardware and solution provider, service over 100 VIP customers from 50 countries in 8 year. Learn More
4xSTM-1 Optical Interface Board(L-1.1,LC)
Applied to Huawei OSN 1500B, OSN 2500, OSN 3500, OSN 7500 to transmit/receive 4*STM-1 optical signals range at 15-40km.
Can be substituted by SSN1SLQ1(L-1.1,LC).
Supports the detection and query of the information about the optical module.
Provides the ALS function. The optical interface supports the setting of the on/off state of a laser.
Supports the usage and detection of the SFP optical module.
Supports the VC-12 services, VC-3 services, and VC-4 services.
Supports the transparent transmission and termination of the path overheads.
Supports the setting and query of the J0, J1, J2, and C2 bytes.
Supports one to four channels of ECC communication.
Supports the two-fiber ring MSP, four-fiber ring MSP, linear MSP, SNCP, SNCTP, and SNCMP.
Supports inloops and outloops at optical interfaces.
Supports inloops and outloops on VC-4 paths.
Supports warm resets and cold resets. The warm reset does not affect services.
Supports the query of the manufacturing information of the board.
Supports the in-service loading of the FPGA.
Supports the upgrade of the board software without affecting services.
Supports the PRBS function.
Supports the press-to-collect function in fault data collection.
SSN1SLQ1A(L-1.1,LC) is a 4-ports STM-1 optical interface board, can be used on Huawei OSN1500B, OSN2500, OSN3500, OSN7500. SSN1SLQ1A(L-1.1,LC) part number is 03053171, model name is SSN1SLQ1A11. SSN1SLQ1A(L-1.1,LC) come with 4 unit L-1.1 SFP module, transmission distance is 40km. SFP module is swappable to perform different transmission distance.
The front panel of the SSN1SLQ1A(L-1.1,LC) has indicators, interfaces, a bar code, and a laser safety class label.
OSN 1500B: The SSN1SLQ1A(L-1.1,LC) can be installed in slots 11–13.
OSN 2500: The SSN1SLQ1A(L-1.1,LC) can be installed in any of slots 5–8 and 11–13.
OSN 3500: The SSN1SLQ1A(L-1.1,LC) can be installed in any of slots 1–8 and 11–17.
OSN 7500: The SSN1SLQ1A(L-1.1,LC) can be installed in any of slots 1–8, 11–18, and 26–31.
|The number code that follows the board name in the bar code is the feature code of the board. The feature code of the SSN1SLQ1A(L-1.1,LC) indicates the type of optical interface.|
|Board||Feature Code||Type of Optical Interface|
|Optical Interface Parameter|
|Nominal bit rate||155520 kbit/s|
|Line code pattern||NRZ|
|Transmission distance (km)||15 to 40|
|Type of fiber||Singlemode LC|
|Operating wavelength range (nm)||1263 to 1360|
power range (dBm)
|-15 to 0|
|Receiver sensitivity (dBm)||-34|
|Minimum overload (dBm)||-10|
|Minimum extinction ratio (dB)||10|
|Maximum -20 dB spectral width (nm)||-|
|Minimum side mode suppression ratio (dB)||-|
|Dimensions (mm)||25.4 (W) x 220 (D) x 254.1 (H)|
Q: What the difference between different functional version?
A: The SLQ1A is available in one functional version, namely, N1.
Through the board version replacement function, the N1SLQ1 and the N1SLQ1A can substitute each other.
Q: What is the difference between different function code?
|Board||Feature Code||Optical Interface||Transmission Distance|
Q: Can I change SFP module to reach longer transmission distance?
A: Yes, you can, please contact thunder-link.com sales team, for available SFP module and cost.
Q: Can I equip different specification SFP module on different port, to perform different transmission distance for each port?
A: Yes, you can, but that not recommended.
Q: Can I use compatible SFP module on SSN1SLQ1A(L-1.1,LC) board?
A: Yes, you can, the board might generate alarm, but it won’t affect use.
Q: Can I return/exchange board if not compatible with my system?
A: Yes, please tell our sales team your system and main control board version, before your purchase.
Q: The board is new or refurbished?
A: Yes, it is original new, not been used.
Q: Do you sell SFP module separately?
A: Yes, we do.
Q: What is the lead time for SSN1SLQ1A(L-1.1,LC) board?
A: In normal condition is 5 days, better to confirm with our sales team before your purchase.