My Cart

Mini Cart

SSN2SLQ1(S-1.1,LC)

SSN2SLQ1(S-1.1,LC)

PN: 03050630
RFQ
Huawei OSN1500 2500 3500 7500 4-ports STM-1 155M optical interface board SSN2SLQ110 equipped with 4 S-1.1 15km SFP module
- +
Hardware Tested

Hardware Tested x

In order to avoid hardware malfunction, each equipment will be strictly tested before delivery and the test report will be packed inside equipment and delivered together. Learn More

Hardware Compatibility

Hardware Compatibility x

Backed up by our experienced pre-sales support team, and volume documentation, to avoid purchasing incompatible hardware.

Software Compatibility

Software Compatibility x

Software compatibility test between active/standby system board, main control board and service board, mother/sub-card; system commissioning test to prevent all software conflicts.

Firmware Upgrades

Firmware Upgrades x

Firmware upgrades allow our customers to utilize the latest features and security enhancements that simply make the devices to operate proficiently.Learn More

Huawei OSN 3500 System Test Procedure

In this document, we will show you how thunder-link.com tests SDH equipment product boards.

Overview

4xSTM-1 Optical Interface Board(S-1.1,LC)

Apply to OSN 1500B, OSN 2500, OSN 3500, OSN 7500 to transmit/receive 4xSTM-1 optical signals range at 2-15km.

Supports TCM and AU-3 services, can substituted for SSN1SLQ1A(S-1.1,LC).

Supports the detection and query of the information about the optical module.

Provides the ALS function. The optical interface supports the setting of the on/off state of a laser.

Supports the usage and detection of the SFP optical module

Supports the VC-12 services, VC-3 services, and VC-4 services, AU-3 services.

Supports the transparent transmission and termination of the path overheads.

Supports the setting and query of the J0, J1, J2, and C2 bytes.

Supports one to four channels of ECC communication.

Supports the two-fiber ring MSP, four-fiber ring MSP, linear MSP, SNCP, SNCTP, and SNCMP.

Supports inloops and outloops at optical interfaces.

Supports inloops and outloops on VC-4 paths.

Supports warm resets and cold resets. The warm reset does not affect services.

Supports the query of the manufacturing information of the board.

Supports the in-service loading of the FPGA.

Supports the upgrade of the board software without affecting services.

Supports the press-to-collect function in fault data collection.

 

SSN2SLQ1(S-1.1,LC) is a 4-ports STM-1 optical interface board, can be used on Huawei OSN1500B, OSN2500, OSN3500, OSN7500. SSN2SLQ1(S-1.1,LC) part number is 03050630, model name is SSN2SLQ110.SSN2SLQ1(S-1.1,LC) come with 4 unit S-1.1 SFP module, transmission distance is 15km. SFP module is swappable to perform different transmission distance.

Tech Specs
Front Panel

The front panel of the SSN2SLQ1(S-1.1,LC) has indicators, interfaces, a bar code, and a laser safety class label.

Valid Slot

OSN 1500B: When the cross-connect board is CXLN: the SSN2SLQ1(S-1.1,LC) can be installed in slots 11–13.

OSN 2500: When the cross-connect boards are CXLN and CXLLN: the SSN2SLQ1(S-1.1,LC)can be installed in slots 5–8 and 11–13.

OSN 3500: When the cross-connect boards are IXCS and SXCA: the SSN2SLQ1(S-1.1,LC)can be installed in slots 1–8 and 11–17.

OSN 7500: The SSN2SLQ1(S-1.1,LC)can be installed in slots 1–8, 11–18 and 26-31.

Feature Code
The number code that follows the board name in the bar code is the feature code of the board. The feature code of the SSN2SLQ1(S-1.1,LC) indicates the type of optical interface.
BoardFeature CodeType of Optical Interface
SSN2SLQ11010S-1.1
Optical Interface Parameter
ParameterValue
Nominal bit rate155520 kbit/s
Line code patternNRZ
Application codeS-1.1
Transmission distance (km)2 to 15
Type of fiberSinglemode LC
Operating wavelength range (nm)1261 to 1360
Launched optical
power range (dBm)
-15 to -8
Receiver sensitivity (dBm)-28
Minimum overload (dBm)-8
Minimum extinction ratio (dB)8.2
Maximum -20 dB spectral width (nm)-
Minimum side mode suppression ratio (dB)-
Mechanical Specifications
Dimensions (mm)25.4 (W) x 235.2 (D) x 261.4 (H)
Weight (kg)1
Q&A

Q: What the difference between different functional version? 

A: SLQ1 is available in two functional versions, namely, N1 and N2, The N1SLQ1 is discontinued. The difference as below:


N1N2
single-fiber bidirectional optical modulesSupportedNot supported
AU-3 serviceNot supportedsupported
inloops and outloops on VC-4 pathsSupportedNot supported
TCM functionNot supportedSupported


Q: What the board substitution relation among different versions?

A: Through the board version replacement function, the N3SLQ1 can substitute for the N1SLQ1 and N2SLQ1 at the same line rate.


Q: What is the difference between different function code?

A:

BoardFeature CodeOptical InterfaceTransmission Distance
SSN1SLQ110
SSN2SLQ110
10S-1.115km
SSN1SLQ111
SSN2SLQ111
11L-1.140km
SSN1SLQ112
SSN2SLQ112
12L-1.280km
SSN1SLQ113
SSN2SLQ113
13Ve-1.2100km
SSN1SLQ114
SSN2SLQ114
14I-12km
SSN1SLQ11515Ie-12km


Q: Can I change SFP module to reach longer transmission distance?

A: Yes, you can, please contact thunder-link.com sales team, for available SFP module and cost.


Q: Can I equip different specification SFP module on different port, to perform different transmission distance for each port?

A: Yes, you can, but that not recommended.


Q: Can I use compatible SFP module on SSN2SLQ1(S-1.1,LC) board?

A: Yes, you can, the board might generate alarm, but it won’t affect use.


Q: Can I return/exchange board if not compatible with my system?

A: Yes, please tell our sales team your system and main control board version, before your purchase.


Q: The board is new or refurbished? 

A: Yes, it is original new, not been used.


Q: Do you sell SFP module separately? 

A: Yes, we do.


Q: What is the lead time for SSN2SLQ1(S-1.1,LC) board? 

A: In normal condition is 5 days, better to confirm with our sales team before your purchase.

Reviews
Write Your Own Review
You're reviewing:SSN2SLQ1(S-1.1,LC)
Your Rating:
Why Thunder-link.com
  •  

  •  

  •  

  •  

  •  

  •  

  •  

  •  

  •