4xSTM-16 15km Optical Interface Board SSND0SLQ1602 S-16.1
3-Level Quality Control x
We provide 3-Level Quality Control procedure: 1-Level inspection; 2-Level In-stock test; 3-Level 24 hour pre-delivery and 1 year warranty. Learn More
8-Year Gold Supplier x
Thunder-link.com, founded in 2011, a leading professional Huawei network hardware and solution provider, service over 100 VIP customers from 50 countries in 8 year. Learn More
Apply to Huawei OSN 3500, OSN 7500 equipment to transmit and receive 4×STM-16 optical signals, at transit 2~15km.
Supports the CWDM and DWDM colored optical interfaces.
Supports the single-fiber bidirectional optical module.
Supports inloops and outloops on VC-4 paths.
Supports detection and query of the voltage
Supports the detection and query of the information about the optical module.
Provides the ALS function. The optical interface supports the setting of the on/off state of a laser.
Supports the usage and detection of the SFP optical module, which facilitates the maintenance.
Supports the single-fiber bidirectional optical module
Supports the VC-12 services, VC-3 services, VC-4 services.
Support VC-4-4c concatenation services, VC-4-8c concatenation services, and VC-4-16c concatenation services.
Supports the configuration of the D1-D12, E1, and E2 bytes as transparent transmission bytes.
Supports the transparent transmission and termination of the path overheads.
Supports the setting and query of the J0, J1, J2, and C2 bytes.
Supports one to four channels of ECC communication.
Supports the Two-fiber ring MSP.
Supports the Four-fiber ring MSP, MSP, SNCP, SNCMP, SNCTP.
Supports the fiber-shared virtual trail protection.
Supports the fiber-shared MSP and processes eight sets of K bytes.
Supports a maximum of eight MSP rings.
Supports inloops and outloops at optical interfaces.
Supports warm resets and cold resets. The warm reset does not affect services.
Supports the query of the manufacturing information of the board.
Supports the in-service loading of the FPGA.
Supports the upgrade of the board software without affecting services.
Supports the press-to-collect function in fault data collection.
Supports detection and query of the voltage.
Supports the PRBS function in the line direction and Cause by Cross function.
SSND0SLQ16 is a 4-ports STM-16 optical interface board, can be used on Huawei OSN3500, OSN7500. SSND0SLQ16(S-16.1,LC) part number is 03052969, model name is SSND0SLQ1602, SSN4SLQ1602.SSND0SLQ16(S-16.1,LC) comes with 4 unit S-16.1 SFP module, transmission distance is 15km. SFP module is swappable to perform different transmission distance.
The number code that follows the board name in the bar code is the feature code of the board. The feature code of the SSND0SLQ16(S-16.1,LC)indicates the type of optical interface.
|OSN 3500: SSND0SLQ16(S-16.1,LC) can be installed in slots 1–4, 15, and 16. In this case, 2 optical interfaces can be configured;|
SSND0SLQ16(S-16.1,LC) can be installed in slots 5–8 and 11–14. In this case, 4 optical interfaces can be configured.
OSN 7500: SSND0SLQ16(S-16.1,LC) can be installed in slots 1–8, 11–18, and 26–31. In this case, 4 optical interfaces can be configured.
|The feature code of the SSND0SLQ16(S-16.1,LC) indicates the type of optical interface.|
|Board||Feature Code||Type of Optical Interface|
|Optical interface parameters|
|Nominal bit rate||2488320 kbit/s|
|Line code pattern||NRZ|
|Transmission distance (km)||15 to 40|
|Type of fiber||Single-mode LC|
|Operating wavelength range (nm)||1260 to 1360|
|Launched optical power range(dBm)||-5 to 0|
|Receiver sensitivity (dBm)||-18|
|Minimum overload (dBm)||0|
|Maximum -20 dB spectral width (nm)||1|
|Minimum extinction ratio (dB)||8.2|
|Minimum side mode suppression ratio (dB)||30|
|Dimensions (mm)||25.4 (W) x 235.2 (D) x 261.4 (H)|
Q: What the difference between different functional version?
A: SLQ1 is available in three functional versions, namely, N1, N2, and N4, N4 version also called ND0 version. The N2SLQ16 is discontinued. The difference as below:
|Color Interface(CWDM, DWDM)||Not supported||Not supported||Supported|
|single-fiber bidirectional optical modules||Not supported||Not supported||Supported|
|AU-3 service||Not supported||Supported||Not supported|
|inloops/outloops on VC-4 paths||Supported||Not supported||Supported|
|TCM function||Not supported||Supported||Not supported|
|Detection and query of the voltage||Not supported||Not supported||Supported|
Q: What the board substitution relation among different versions?
A: When the AU-3 services and TCM function are not required, the N1SLQ16 and N2SLQ16 can be substituted with each other. The N4SLQ16 supports the board version replacement function to substitute for the N1SLQ16/N2SLQ16.
Q: What is the difference between different function code?
|Board||Feature Code||Optical Interface||Transmission Distance|
Q: Can I change SFP module to reach longer transmission distance?
A: Yes, you can, please contact thunder-link.com sales team, for available SFP module and cost.
Q: Can I equip different specification SFP module on different port, to perform different transmission distance for each port?
A: Yes, you can, but that not recommended.
Q: Can I use compatible SFP module on SSND0SLQ16(S-16.1,LC) board?
A: Yes, you can, the board might generate alarm, but it won’t affect use.
Q: Can I return/exchange board if not compatible with my system?
A: Yes, please tell our sales team your system and main control board version, before your purchase.
Q: The board is new or refurbished?
A: Yes, it is original new, not been used.
Q: Do you sell SFP module separately?
A: Yes, we do.
Q: What is the lead time for SSND0SLQ16(S-16.1,LC) board?
A: In normal condition is 5 days, better to confirm with our sales team before your purchase.