SCC Cross-Connect Timing and STM-16 80km line integrated board SSQ2CXL1604 L-16.2
3-Level Quality Control x
We provide 3-Level Quality Control procedure: 1-Level inspection; 2-Level In-stock test; 3-Level 24 hour pre-delivery and 1 year warranty. Learn More
8-Year Gold Supplier x
Thunder-link.com, founded in 2011, a leading professional Huawei network hardware and solution provider, service over 100 VIP customers from 50 countries in 8 year. Learn More
Huawei OSN1500 OSN2500 SCC unit, Cross-Connect unit, Timing unit, and STM-16 2.5G line unit integrated board SSQ2CXL1604 equipped with 1 L-16. 80km SFP module
SSQ2CXL16 can configure STM-16 SFP module.
Higher order cross-connect capacity: 20 Gbit/s
Lower order cross-connect capacity: 20 Gbit/s
Access capacity: 18.75 Gbit/s.
Supports the detection and query of the information about the optical module.
Supports the ALS function.
Supports the single-fiber bidirectional optical module.
Supports the transparent transmission and termination of the path overheads.
Supports the setting and query of the J0, J1, J2, and C2 bytes.
Supports various alarms and performance events.
Supports one channel of ECC communication
Supports the two-fiber ring MSP, four-fiber ring MSP, linear MSP, SNCP, SNCTP, and SNCMP protechtion schemes.
Supports 1+1 hot backup for the Cross-Connect, Timing and SCC Units protection schemes.
Supports inloops and outloops at optical interfaces.
Supports the warm reset and cold reset.
Supports the query of the manufacturing information of the board.
Supports the in-service loading of the FPGA.
Supports the upgrade of the board software without affecting services.
Processes 40 channels of DCC signals.
Supports the in-service check function for the PIU.
Supports the failure check function for the lightning protection module of the PIU.
Supports the VC-12, VC-3, VC-4 services, VC-4-4c, VC-4-8c and VC-4-16 concatenation services.
Q2CXL16 is a Main Control and Cross-Connect integrated board for Huawei OSN1500, OSN2500, provide STM-16 signals, controls communication, grooms services and clock signals. Part number is 03055398, V1R8, V1R10 version are default mainstream delivery version.
SSQ2CXL16(L-16.2) configure 1 L-16.2 80km SFP module, but eSFP module are changeable to different type as S-16.1, L-16.1 to reach different transmission distance, please contact thunder-link.com sales team if need customized configuration.
The front panel of the SSQ2CXL16(L-16.2,LC) board has indicators, interfaces, functional button switch, barcode and laser safety class label.
|Board||Feature Code||Type of Optical Interface|
|Optical Interface Parameter|
|Nominal bit rate||2488320 kbit/s|
|Line code pattern||NRZ|
|Transmission distance (km)||50 to 80|
|Type of fiber||Single-mode LC|
|Operating wavelength range (nm)||1500 to 1580|
|Launched optical power range (dBm)||-2 to 3|
|Receiver sensitivity (dBm)||-28|
|Minimum overload (dBm)||-9|
|Minimum extinction ratio (dB)||8.2|
|Maximum -20 dB spectral width (nm)||1|
|Minimum side mode suppression ratio (dB)||30|
|Dimensions (mm)||25.4 (W) x 220 (D) x 254.1 (H)|
Q: Can I use only one board Q2CXL16 in OSN 2500/OSN 1500B?
A: Yes, you can. but highly not recommended.
Q: Does Q2CXL16 board support to change STM-16 module to STM-1/4?
A: No, it doesn't support.
Q: Can I use Q2CXL16 together with Q5CXLLN/R2CXLLN?
A: No, you can't
Q: What is the cross-connect capacity of Q2CXL16?
|Higher order cross-connect capacity(Gbit/s)||Lower order cross-connect capacity(Gbit/s)||Access capacity(Gbit/s)|
Q: The board is new or refurbished?
A: Yes, it is original new, not been used.
Q: Can I return/exchange board if not compatible with my system?
A: Yes, please tell our sales team your system and main control board version, before your purchase.
Q: What is the lead time for SSQ2CXL16 board?
A: In normal condition is 5 days, better to confirm with our sales team before your purchase.