|Price:||US $7,900.00||US $--|
|Description:||Huawei OSN 6800 OSN8800 40G Line Service Processing Board(800 ps/nm,AFEC,DQPSK,Tunable), 50GHz( Rx1_PIN,Tx1_-5dBm~0dBm,LC)|
40G line service processing board(800 ps/nm,AFEC DQPSK,Tunable), 50GHz(Rx1_PIN,Tx1_-5dBm~0dBm,LC), apply to Huawei OSN 6800 OSN8800.
Converts 32xODU0, 16xODU1, 4xODU2 and 1xODU3 into one OTU3 signal.
Available functional versions of the NS3 board are TN11, TN52, TN54, TN55, and TN56.
TN54NS3T01 achieves cross-connection at the electrical layer and to provide OTN interfaces and ESC.
TN54NS3T01 can work in either line mode or relay mode.
TN54NS3T01 for OSN 6800/OSN 8800 universal platform subrack only supports relay mode.
It does not support OTU3e on the WDM side and ODU2e on the backplane side when equipped with 40 Gbit/s-multirate-2km optical modules.
The preceding restriction does not apply when equipped with 800ps/nm-C band-tunable-ODB-PIN or 800ps/nm-C band-tunable-DQPSK-PIN optical modules.
Supports the OTU3/OTU3e interface on the WDM side.
Supports the OTN frame format and overhead processing by referring to the ITU-T G.709.
OTU3 layer: supports the SM function.
ODUk(k=0, 1, 2, 3, flex) layer supports the PMand TCM function, and PM and TCM non-intrusive monitoring functions.
80 wavelengths tunable in the C band with 50 GHz channel spacing.
Supports ESC function.
Supports the PRBS function on the WDM side.
Supports ITU-T G.709-compliant forward error correction (FEC) on the WDM side.
Supports ITU-T G.975.1-compliant AFEC-2 on the WDM side.
The WDM-side signals of the TN54NS3 board can be regenerated using another TN54NS3 board.
Supports IEEE 1588V2 at BC and OC mode, do not support TC and TC+OC mode.
Supports Optical-layer ASON and Electrical-layer ASON (OTN).
Supports ODUk SNCP and OTN protection.
Supports intra-board 1+1 protection (when working with the OLP/DCP/QCP board).
Supports ODUk SPRing protection.
Supports tributary SNCP protection.
Supports OWSP protection.
Supports SDH protection, SNCP, SNCTP, LMSP, MSP ring.
Support Loopback at WDM side and ODU0/ODU1/ODU2 Channel Loopback.
TN54NS3T01 is a Huawei OSN 6800 OSN 8800 40G line service processing board(800 ps/nm,AFEC,DQPSK,Tunable), 50GHz( Rx1_PIN,Tx1_-5dBm~0dBm,LC), converts 32xODU0, 16xODU1, 4xODU2 and 1xODU3 into one OTU3 signal.
TN54NS3T01 part number is 03030LWM, some other version like TN11, TN52, TN55, and TN56 with different system compatibility and feature supported. TN54NS3 has feature code like T01 and T03, with different line code.
There are indicators and interfaces on the front panel of the NS3 board.
OptiX OSN 8800 T64 subrack: IU1-IU8, IU11-IU42, IU45-IU68.
|Variant||WDM-Side Fixed Optical Module|
|TN54NS3T01||800 ps/nm-C Band-Tunable Wavelength-DQPSK-PIN|
|Optical Interface Parameter|
|Optical Module Type||800 ps/nm-C Band-Tunable Wavelength-DQPSK-PIN|
|Line code forma||DQPSK|
|Transmitter parameter specifications at point S|
|Operating frequency range(THz)||192.10 to 196.05|
|Maximum mean launched power(dBm)||0|
|Minimum mean launched power(dBm)||-5|
|Minimum extinction ratio(dB)||NA|
|Center frequency deviation(GHz)||±2.5|
|Maximum - 20 dB spectra width(nm)||NA|
|Maximum -3 dB spectral width(nm)||0.3|
|Dispersion tolerance(ps/nm)||-800 to 800|
|Receiver parameter specifications at point R|
|Operating wavelength range(nm)||1529 to 15610|
|Receiver sensitivity, EOL(FEC on)(dBm)||-16|
|Minimum receiver overload(FEC on)||0|
|Dimensions(mm)||25.4(W) x 220(D) x 264.6(H)|
Q: How many hardware version does NS3 have?
A: NS3 is available in TN11, TN52, TN54, TN55, and TN56. The mappings between the board and equipment are as below:
|Board||Initial Versiona(a)||General 8800 T64 Subrack||Enhanced 8800 T64 Subrack||General 8800 T32 Subrack||Enhanced 8800 T32 Subrack||8800 T16 Subrack||8800 Universal Platform Subrack||6800 Subrack||3800 Chassis|
|a: If there is a substitution relationship between two boards and one of the boards is used to replace the other board, the device initial version supported by the replaced board takes effect. For example, when you use TN56NS3 to replace TN55NS3, TN56NS3 can be supported by V100R006C03.|
Q: What are the differences of different hardware version?
|Board||Cross-Connet Granularity||FEC Encoding||IEEE 1588v2||Physical Clock||Relay Mode||Coherent System||WDM-side Gray Optical Module||SDH Service|
|TN11NS3||ODU2 and ODU2e||FEC/AFEC||N||N||N||N||N||N|
|TN52NS3||ODU0, ODU1, ODU2 and ODU2e||FEC/AFEC||N||N||N||N||N||N|
|TN54NS3||ODU0, ODU1, ODU2, ODU2e and ODU3||FEC/AFEC-2||Y||Y||Y||N||Y||N|
|TN55NS3||ODU0, ODU1, ODU2, ODU2e and ODU3||HFEC||N||N||Y||Y||N||N|
|TN56NS3||ODU0, ODU1, ODU2, ODU2e, ODU3, ODUflex,|
|Board||WDM-Side Fixed Optical Module||WDM-Side Pluggable Optical Module|
|TN11NS3||500 ps/nm-C Band-Tunable|
500 ps/nm-C Band-Tunable
|TN52NS3||500 ps/nm-C Band-Tunable|
800 ps/nm-C Band-Tunable
|TN54NS3||800 ps/nm-C Band-Tunable|
800 ps/nm-C Band-Tunable
40 Gbit/s Multirate-2 km
|TN55NS3||60000 ps/nm-C Band-Tunable|
|TN56NS3||60000 ps/nm-C Band-Tunable|
Q: What's the board substitution relation among different versions?
|Original Board||Substitute Board||Substitution Rules|
|TN11NS3||TN52NS3||The TN52NS3 can be created as NS3 on the NMS. The former can substitute for the latter, without any software upgrade. After substitution, the TN52NS3 functions as the TN11NS3.|
|TN55NS3||TN56NS3||The TN56NS3 can be created as 55NS3 on the NMS. The former can substitute for the latter, without any software upgrade. After substitution, the TN56NS3 functions as the TN55NS3.|
Q: Can I return/exchange board if not compatible with my system?
A: Yes, please tell our sales team your system and main control board version, before purchase.
Q: The board is new or refurbished?
A: It is original new, not been used.
Q: What is the lead time for TN54NS3T01 board?
A: In normal condition is 5 days, better to confirm with our sales team before your purchase.