My Cart

Mini Cart

TN54NS4T01

TN54NS4T01

PN: 03030PGT
92 100 1
RFQ
Huawei OSN8800 100G Line Service Processing Board(40000 ps/nm,LH,HFEC,Coherent,Tunable,50GHz,LC)
- +
Hardware Tested

Hardware Tested x

In order to avoid hardware malfunction, each equipment will be strictly tested before delivery and the test report will be packed inside equipment and delivered together.Learn More

Hardware Compatibility

Hardware Compatibility x

Backed up by our experienced pre-sales support team, and volume documentation, to avoid purchasing incompatible hardware.

Software Compatibility

Software Compatibility x

Software compatibility test between active/standby system board, main control board and service board, mother/sub-card; system commissioning test to prevent all software conflicts.

Overview

100Gbit/s tunable wavelength WDM line service processing board, apply to Huawei OSN8800.

Available functional versions of the NS4 board are TN54, TN56, TN57 and TN58.

In general OSN8800 T64/T32 subrack and OSN 8800 universal platform subrack, TN54NS4T01 can work only in relay mode.

When TN54NS4T01 works in line mode, enhanced OSN 8800 T64 subrack must use TNK2USXH+TNK2UXCT; enhanced OSN 8800 T32 subrack must use the TN52UXCH/TN52UXCM; and OSN 8800 T16 subrack must use TN16UXCM.

TN54NS4 can be substituted by TN56NS4/TN57NS4 on the NMS without any software upgrade.

Boards that use different FEC modes cannot interconnect with each other.

TN54NS4T01 achieves cross-connection at the electrical layer, and to provide OTN interfaces and ESC.

Supports OTU4 interface on the WDM side.

Supports OTN frame format and overhead processing by referring to the ITU-T G.709.

OTU4 layer: supports SM function.

Tune optical signal output on WDM within range of 80 wavelengths in C-band with channel spacing of 50 GHz.

Supported ESC function.

Supports the PRBS function on the WDM side.

Supports HFEC on the WDM side.

The WDM-side signals from an NS4 board can be regenerated by another NS4 or an LTX of the same type.

Supports intra-board 1+1 protection (when working with the OLP/DCP/QCP board).

Supports tributary SNCP protection, ODUk SPRing protection and ODUk SNCP.

Supported WDM side and ODU0/ODU1/ODU2/ODU3/ODU4/ODUflex Channel Loopback.

 

TN54NS4T01 is a 100G OTN line board (40000 ps/nm,LH,HFEC,Coherent Tunable,50GHz,LC), converts 80*ODU0, 80*ODUflex, 40*ODU1, 10*ODU2, 10*ODU2e, 2*ODU3, 1*ODU4 into one OTU4 signal. TN54NS4T01 can apply to Huawei OSN8800. In general OSN 8800 T64/T32 subrack and OSN 8800 universal platform subrack, TN54NS4T01 can work only in relay mode; If you need TN54NS4T01 works in line mode, enhanced OSN 8800 T64 subrack must use TNK2USXH+TNK2UXCT, enhanced OSN 8800 T32 subrack must use the TN52UXCH/TN52UXCM and OSN 8800 T16 subrack must use TN16UXCM.

TN54NS4T01 part number is 03030PGT, some other version like TN56, TN57 and TN58 with different system compatibility and feature supported. TN56NS4/TN57NS4 can substitute for TN54NS4 on the NMS without any software upgrade.

Tech Specs
Front Panel

There are indicators and interfaces on the front panel of the NS4 board.

NS4T01.png

Valid Slot

OptiX OSN 8800 T64 subrack: IU2-IU8, IU12-IU18, IU20-IU26, IU28-IU34, IU36-IU42, IU46-IU52, IU54-IU60, IU62-IU68.

OptiX OSN 8800 T32 subrack: IU2-IU8, IU13-IU19, IU21-IU27, IU30-IU36.

OptiX OSN 8800 T16 subrack: IU2-IU8, IU12-IU18.

OptiX OSN 8800 universal platform subrack: IU4-IU16.

Optical Interface Parameter
ParameterValue
Optical Module Type40000 ps/nm-C Band-Tunable Wavelength-ePDM-QPSK(HFEC)-PIN
Line code formatePDM-QPSK(HFEC)
Transmitter parameter specifications at point S
Center frequency(THz)192.1 to 196.05
Maximum mean launched power(dBm)0
Minimum mean launched power(dBm)-5
Center frequency deviation(GHz)±2.5
Maximum -3 dB spectral width(nm)0.35
Dispersion tolerance (back-to-back)(ps/nm)40000
Receiver parameter specifications at point R
Receiver typePIN
Operating wavelength range(nm)1529 to 1561
Receiver sensitivity(dBm)-16
Minimum receiver overload(dBm)0
Maximum reflectance(dB)-27
Mechanical Specifications
Dimensions(mm)50.8(W) x 220(D) x 264.6(H)
Weight(kg)2.5


Q&A

Q: How many hardware version does NS4 have?

A: NS4 is available in TN54, TN56, and TN57. The mappings between the board and equipment are as below:

BoardInitial Versiona(a)General 8800 T64 SubrackEnhanced 8800 T64 SubrackGeneral 8800 T32 SubrackEnhanced 8800 T32 Subrack8800 T16 Subrack8800 Universal Platform Subrack6800 Subrack3800 Chassis
TN54NS4V100R007C00YYYYYYNN
TN56NS4V100R008C00YYYYYYNN
TN57NS4V100R008C10YYYYYYNN
a: If there is a substitution relationship between two boards and one of the boards is used to replace the other board, the device initial version supported by the replaced board takes effect. For example, when you use TN56NS4T11 to replace TN54NS4T11, TN56NS4T11 can be supported by V100R007C00.


Q: What are the differences of different hardware version?

A: Function:

BoardFEC Encoding
TN54NS4HFEC/SDFEC
TN56NS4SDFEC
TN57NS4HFEC/SDFEC2


Specification:

BoardWDM-Side Fixed Optical ModuleWDM-Side Pluggable Optical Module
TN54NS4

40000 ps/nm-C Band-Tunable Wavelength-ePDM-QPSK(HFEC)-PIN

55000 ps/nm-C Band-Tunable Wavelength-ePDM-QPSK(SDFEC)-PIN

N/A

TN56NS455000 ps/nm-C Band-Tunable Wavelength-ePDM-QPSK(SDFEC)-PINN/A
TN57NS4

40000 ps/nm-C Band-Tunable Wavelength-ePDM-QPSK(HFEC)-PIN

150000 ps/nm-C Band-Tunable Wavelength-ePDM-QPSK(SDFEC2, wDCM-Enhanced)-PIN

150000 ps/nm-C Band-Tunable Wavelength-ePDM-QPSK(SDFEC2)-PIN

55000 ps/nm-C Band-Tunable Wavelength-ePDM-QPSK(SDFEC2)-PIN

40000 ps/nm-C Band-Tunable Wavelength-ePDM-QPSK(SDFEC2)-PIN

150000 ps/nm-C Band-Tunable Wavelength-ePDM-QPSK(SDFEC2, wDCM)-PIN
N/A


Q: What's the board substitution relation among different versions?

A:

Original BoardSubstitute BoardSubstitution Rules
TN54NS4TN56NS4
TN57NS4
The TN56NS4/TN57NS4 can be created as 54NS4 or 54NS4(REG) on the NMS. The former can substitute for the latter, without any software upgrade. After substitution, the TN56NS4 functions as the TN54NS4.
TN56NS4None-
TN57NS4None-


Q: Can I return/exchange board if not compatible with my system?

A: Yes, please tell our sales team your system and main control board version, before purchase.


Q: The board is new or refurbished?

A: It is original new, not been used.


Q: What is the lead time for TN54NS4T01 board?

A: In normal condition is 5 days, better to confirm with our sales team before your purchase.

Reviews(10)

10 reviews

4.6

92.0%
5 start 5 8
4 start 4 0
3 start 3 2
2 start 2 0
1 start 1 0
  1. Global
    Value
    100%
    We trust thunder-link.com because of the excellent technical support team.
  2. Global
    Value
    100%
    thunder-link.com really has rich inventory and once I pay, shipment document is available!
  3. Germany
    Value
    60%
    We finally received 2pcs TN54NS4T01 last weekend, well packed and cards conditio is good, does it support TCM and TCM non-intrusive monitoring of the ODUflex layer?
  4. Paraguay
    Value
    60%
    We buy 2 units for expansion on our OSN8800 T32, can I use it in line mode?
  5. Denmark
    Value
    100%
    Each board is tested with report by thunder-link.com, excelent technical team!
  6. Nepal
    Value
    100%
    I purchased NS4 as 100G line board, what boards at tributary side can I choose?
  7. Global
    Value
    100%
    thunder-link.com really has rich inventory and once I pay, shipment document is available!
  8. Global
    Value
    100%
    We trust thunder-link.com because of the excellent technical support team.
  9. Global
    Value
    100%
    We bought NS4 for expansion, good quality, and Thunder-link.com provide 1 year warranty.
  10. Global
    Value
    100%
    very quick delivery and looks very new, this is most heavy board i have seen
Write Your Own Review
You're reviewing:TN54NS4T01
Your Rating:
Why Thunder-link.com
  • 9 Years Experience

  • Premium Quality GuaranteedValue over price

  • Value over price

  • Tailored Technical Support

  • One Stop Solution

  • Official Document Resource

  • 1 Year Warranty Guaranteed

  • Fast Global Shipping

  • Flexible Payment