| Item |
Specification |
| Installation Type |
Wall |
| Junction Box |
| Dimensions without packaging (H x W x D) [mm(in.)] |
74 mm x 170 mm x 86 mm (2.91 in. x 6.69 in. x 3.39 in.) |
| Weight without packaging [kg(lb)] |
0.70 kg (1.54 lb) |
| Storage |
NAND Flash 512 MB; NOR Flash 16 MB |
| Console port |
BLE console |
| Maximum power consumption [W] |
25.29 (excluding USB and PoE OUT ports) |
| Maximum heat dissipation [BTU/hour] |
86.3 (without USB and PoE OUT) |
| Power supply mode |
DC adapter |
| PoE |
| Rated input voltage [V] |
48 V |
| Input voltage range [V] |
DC: 43.2 V to 57.6 V |
| PoE: 802.3bt/at |
| Service port surge protection [kV] |
PoE port: |
| Differential mode (48 V-RTN): 0.5 kV (1.2/50 us, 42 ohms), criterion B |
| Common mode (8 wires to ground): 6 kV (1.2/50 us, 42 ohms), criterion B |
| Maximum PoE output power [W] |
13.6 W (When the maximum transmission distance through a CAT5E Ethernet cable is 40 m, the port can connect to an 802.3af-compliant PD requiring power of less than 12.95 W.) |
| Maximum number of physical ports on the entire device |
2.5GE (RJ45) x 1, 10M/100M/1000M/2.5GE auto-sensing |
| GE (RJ45) x 4, 10M/100M/1000M auto-sensing |
| 10GE optical port (SFP+), GE/10GE auto-sensing |
| Long-term operating temperature [°C(°F)] |
0°C to 40°C (32°F to 104°F) (If the altitude is in the range of 1800 m to 5000 m, the temperature decreases by 1°C or 1.8°F every time the altitude increases by 300 m.) |
| Storage temperature [°C(°F)] |
–40°C to +70°C (–40°F to +158°F) |
| Long-term operating relative humidity [RH] |
5% RH to 95% RH |
| Long-term operating altitude [m(ft.)] |
–60 m to +5000 m (–196.85 ft to +16404.20 ft) |
| Atmospheric pressure [kPa] |
53kPa – 106kPa ETSI 300 019-2-3 |
| Ground |
floating ground |
| USB |
USB 2.0 |
| IoT slot |
IoT extension by USB |
| BLE |
BLE5.0 |
| Radio number |
2 |
| Operating frequency band |
2.4GHz |
| 5GHz |
| MIMO spatial streams |
Radio 0 (2.4 GHz): 2×2 |
| Radio 1 (5 GHz): 4×4 |
| Wi-Fi standard |
2.4G: 802.11b/g/n/ax |
| 5G: 802.11a/n/ac/ac Wave 2/ax |
| Radio interface |
Built-in smart antennas |
| Antenna gain |
2.4G: 4 dBi |
| 5G: 5 dBi |
| Bluetooth: 4 dBi |
| Maximum transmit power |
2.4G: 23 dBm |
| 5G: 26 dBm |
| (Note: This is the total MIMO radio power, the same as: |
| 2.4G: 20 dBm/chain |
| 5G: 20 dBm/chain) |
| Bluetooth: < 10 dBm |
| Singal radio transmit power [dBm] |
2.4G: -10 dBm to 20 dBm/chain |
| 5G: -10 dBm to 20 dBm/chain |
| MTBF [year] |
37 year |
| MTTR [hour] |
0.5 hour |
| Frequency stability [ppm] |
+/-20 |
| 802.3bt power supply description |
Wi-Fi: |
| If no optical port is used, Wi-Fi is not restricted. |
| If optical ports are used, Wi-Fi supports only the 2.4 GHz (2×2, 20 MHz bandwidth) + 5 GHz (2×2, 80 MHz bandwidth) working mode, and the radio transmit power is not affected. |
| Wired network port: The 2.5GE electrical port and SFP+ optical port work as combo ports. When one of them is working, the other is unavailable. The four downlink ports are all available. |
| Other ports: not restricted |
| 802.3at power supply description |
Wi-Fi: |
| If the USB and PoE out ports are not used and only the 2.5GE electrical port is used as the uplink port, Wi-Fi supports the 2.4 GHz (2×2, 20 MHz bandwidth) + 5 GHz (4×4, 80 MHz bandwidth) working mode, and the radio transmit power is not affected. |
| If an optical port or the 2.5 W USB port is used, Wi-Fi supports only the 2.4 GHz (2×2, 20 MHz bandwidth) + 5 GHz (2×2, 80 MHz bandwidth) working mode, and the radio transmit power is not affected. |
| Wired network port: The 2.5GE electrical port and SFP+ optical port work as combo ports. When one of them is working, the other is unavailable. The four downlink ports are all available. |
| Other ports: Only the 2.5 W USB port is supported. The 5 W USB port and PoE OUT port are unavailable. |
| 802.3af power supply description |
The 802.3af power supply is not supported. |
| DC power supply description |
Wi-Fi: |
| If no optical port is used, Wi-Fi is not restricted. |
| If optical ports are used, Wi-Fi supports only the 2.4 GHz (2×2, 20 MHz bandwidth) + 5 GHz (2×2, 80 MHz bandwidth) working mode, and the radio transmit power is not affected. |
| Wired network port: not restricted |
| Other ports: not restricted |
![Icon [all products]](https://www.thunder-link.com/tl-content/uploads/2022/05/Icon-all-products-1.svg "Icon [all products]"){kind=icon}
All products
Loizias
Cyprus
The device works well as expected and the documentation is useful for some work.