| Item | Specification |
| Dimensions without packaging (H x W x D) [mm(in.)] | 45 mm x 200 mm x 200 mm (1.77 in. x 7.87 in. x 7.87 in.) |
| Dimensions with packaging (H x W x D) [mm(in.)] | 90 mm x 285 mm x 250 mm (3.54 in. x 11.22 in. x 9.84 in.) |
| Weight without packaging [kg(lb)] | 1.19 kg (2.62 lb) |
| Weight with packaging [kg(lb)] | 1.56 kg (3.44 lb) |
| Storage | NAND Flash 512 MB |
| Console port | BLE console |
| Maximum power consumption [W] | 12.6 W |
| Maximum heat dissipation [BTU/hour] | 43 BTU/hour |
| Power supply mode | DC adapter |
| Number of power modules | 1 |
| Rated input voltage [V] | 12 V mining explosion-proof and intrinsically safe DC regulated power supply (overcurrent protection value ≥ 1.8 A) |
| Input voltage range [V] | 12 V ± 10% |
| Maximum PoE output power [W] | Not supported |
| Redundant power supply | Not supported |
| Types of fans | None |
| Number of fan modules | 0 |
| Maximum number of physical ports on the entire device | GE (RJ45) x 2, 10M/100M/1000M auto-sensing |
| GE optical (SFP) x 2 | |
| Long-term operating temperature [°C(°F)] | –40°C to +70°C (–40°F to +158°F) (If the altitude is in the range of 1800 m to 5000 m, the temperature decreases by 1°C or 1.8°F every time the altitude increases by 300 m.) |
| Storage temperature [°C(°F)] | –40°C to +85°C (–40°F to +185°F) |
| Long-term operating relative humidity [RH] | 5% RH to 95% RH |
| Long-term operating altitude [m(ft.)] | –60 m to +5000 m (–196.85 ft to +16404.20 ft) |
| Atmospheric pressure [kPa] | 53kPa – 106kPa ETSI 300 019-2-3 |
| Ground | floating ground |
| Antenna port surge protection [KA] | N/A |
| BLE | BLE5.2 |
| Radio number | 2 |
| Operating frequency band | 2.4GHz |
| 5GHz | |
| MIMO spatial streams | Radio 0 (2.4 GHz): 2×2 |
| Radio 1 (5 GHz): 2×2 | |
| Wi-Fi standard | 2.4G: 802.11b/g/n/ax |
| 5G: 802.11a/n/ac/ac Wave 2/ax | |
| Radio interface | MCX |
| Antenna gain | Built-in BLE: 0 dBi |
| Maximum transmit power | 2.4G: 15 dBm/chain |
| 5G: 15 dBm/chain | |
| (Each radio of the AP has two spatial streams, which correspond to four RF ports through the built-in power splitter. The preceding transmit power values are the transmit power of a single RF port after power splitting.) | |
| BLE: < 0 dBm | |
| Singal radio transmit power [dBm] | 2.4G: -10 dBm to 15 dBm/chain |
| 5G: -10 dBm to 15 dBm/chain | |
| The preceding power ranges are the power values after power splitting by the built-in power splitter. Each radio corresponds to four ports. | |
| MTBF [year] | 152 year |
| MTTR [hour] | 2 hour |
| Frequency stability [ppm] | +/-20 |
| DC power supply description | In coal mine scenarios, it must be used with the specified mining explosion-proof and intrinsically safe power supply. |





Margaret
Kenya
Thanks so much for your help! I’ll be ordering a few more parts in the next few weeks, thanks again for being so on-top of this!