Name: Buy Huawei AirEngine 6760-X1E Access Point online at thunder-link.com
SKU: 02353GSK

AirEngine 6760-X1E

Huawei AirEngine 6760-X1E Rail Transportation AP with 1 x 10GE electrical port + 1 x GE electrical port + 1 x 10GE SFP+ optical port

in stock Ready to ship

Original New Sealed

Original New Sealed x

Original, new and sealed switch; original packaging with seal; won't unpack the product without permission (insert the power module or replace the power supply cable).

Item	Specification
Installation Type	Wall
	Ceiling
	T-Rail
Dimensions without packaging (H x W x D) [mm(in.)]	61 mm x 220 mm x 220 mm (2.40 in. x 8.66 in. x 8.66 in.)
Weight without packaging [kg(lb)]	1.85 kg (4.08 lb)
Storage	NAND Flash 512 MB; NOR Flash 16 MB
Console port	BLE console
Maximum power consumption [W]	39.9 (excluding USB and IoT cards)
Maximum heat dissipation [BTU/hour]	136.1 (without USB or IoT card)
Power supply mode	DC adapter
Power supply mode	PoE
Rated input voltage [V]	48 V
Input voltage range [V]	DC: 43.2 V to 57.6 V
Input voltage range [V]	PoE: 802.3bt/at
Service port surge protection [kV]	PoE port:
	Differential mode (48 V-RTN): 0.5 kV (1.2/50 us, 42 ohms), criterion B
	Common mode (8 wires to ground): 6 kV (1.2/50 us, 42 ohms), criterion B
Maximum number of physical ports on the entire device	10GE (RJ45) x 1, 10M/100M/1000M/2.5GE/5GE/10GE auto-sensing
	GE (RJ45) x 1, 10M/100M/1000M auto-sensing
	10GE optical port (SFP+), GE/10GE auto-sensing
Long-term operating temperature [°C(°F)]	–10°C to +50°C (14°F to 122°F) (If the altitude is in the range of 1800 m to 5000 m, the temperature decreases by 1°C or 1.8°F every time the altitude increases by 300 m.)
Storage temperature [°C(°F)]	–40°C to +70°C (–40°F to +158°F)
Long-term operating relative humidity [RH]	5% RH to 95% RH
Long-term operating altitude [m(ft.)]	–60 m to +5000 m (–196.85 ft to +16404.20 ft)
Atmospheric pressure [kPa]	53kPa – 106kPa ETSI 300 019-2-3
Ground	Ground
USB	USB 2.0
IoT slot	IoT card
BLE	BLE5.2
Radio number	2/3
Operating frequency band	2.4GHz
Operating frequency band	5GHz
MIMO spatial streams	Triple-radio mode:
	Radio 0 (2.4 GHz): 4×4
	Radio 1 (5 GHz): 4×4 (high frequency band)
	Radio 2 (5 GHz): 4×4 (low frequency band)
	Dual-radio mode:
	Radio 0 (2.4 GHz): 4×4
	Radio 1 (5 GHz): 8×8
Wi-Fi standard	2.4G: 802.11b/g/n/ax
Wi-Fi standard	5G: 802.11a/n/ac/ac Wave 2/ax
Radio interface	External antenna
Antenna gain	Bluetooth: 4 dBi
Maximum transmit power	2.4G: 26 dBm (Max)
	5G: 29 dBm (Max)
	(Note: This is the total MIMO radio power, the same as:
	2.4G: 20 dBm/chain
	5G: 20 dBm/chain)
	Bluetooth: < 10 dBm
Singal radio transmit power [dBm]	2.4G: -10 dBm to 20 dBm/chain
Singal radio transmit power [dBm]	5G: -10 dBm to 20 dBm/chain
MTBF [year]	74 year
MTTR [hour]	0.5 hour
Frequency stability [ppm]	+/-20
802.3bt power supply description	In 802.3bt Class 8 power supply mode:
	If an RTU license is loaded, no function is restricted.
	If no RTU license is loaded, Wi-Fi works in 2.4 GHz (4×4) + 5 GHz (6×6) mode and other functions are not restricted.
	In 802.3bt Class 6 power supply mode:
	– With an RTU license loaded:
	Wi-Fi: If the USB and IoT card slots are not used, the number of spatial streams and transmit power are not affected. If they are used, the number of spatial streams, transmit power, and bandwidth may be affected. For details, contact the product manager.
	Wired network port: not restricted
	Other ports: The USB port and IoT card slot are available. If they are used, the number of spatial streams, transmit power, and bandwidth may be affected. For details, contact the product manager.
	– Without an RTU license loaded:
	Wi-Fi: 2.4 GHz (4×4) + 5 GHz (6×6). The radio transmit power is not affected. If the USB port and IoT card slot are used, the radio working bandwidth may be affected. For details, contact the product manager.
	Wired network port: not restricted
	Other ports: The USB port and IoT card slot are available. If they are used, the radio working bandwidth may be affected. For details, contact the product manager.
802.3at power supply description	With an RTU license loaded:
	Wi-Fi:
	If the USB and IoT card slots are not used, the radio transmit power is not affected.
	Dual-radio mode: 2.4 GHz (2×2) + 5 GHz (4×4)
	Triple-radio mode: 2.4 GHz (2×2) + 5 GHz (2×2, high band) + 5 GHz (2×2, low band)
	Dual-radio + independent radio scanning mode: 2.4 GHz (2×2) + 5 GHz (2×2) + 5 GHz independent radio scanning
	If the USB and IoT card slot are both used, the number of spatial streams, transmit power, and bandwidth may be affected. For details, contact the product manager.
	Wired network port:
	The speed of the 10GE electrical port is reduced to GE or lower. The 10GE electrical port and SFP+ optical port are combo ports, and only one of them is available at the same time. (In V200R021C10 and later versions, the GE electrical port is also available in standard dual-radio mode.)
	Other ports:
	Either the 2.5 W USB port or IoT card slot can be used at the same time. The IoT card slot takes precedence. If both of them are used, Wi-Fi can only work in 2.4 GHz (2×2) + 5 GHz (2×2) mode. For details, contact the product manager.
	Without an RTU license loaded:
	Wi-Fi:
	If no USB or IoT card slot is used, Wi-Fi can work only in 2.4 GHz (2×2) + 5 GHz (4×4) mode, and the radio transmit power is not affected.
	If the USB and IoT card slot are both used, the number of spatial streams, transmit power, and bandwidth may be affected. For details, contact the product manager.
	Wired network port:
	The speed of the 10GE electrical port is reduced to GE or lower. The 10GE electrical port and SFP+ optical port are combo ports, and only one of them is available at the same time. (In V200R021C10 and later versions, the GE electrical port is also available in standard dual-radio mode.)
	Other ports:
	Either the 2.5 W USB port or IoT card slot can be used at the same time. The IoT card slot takes precedence. If both of them are used, Wi-Fi can only work in 2.4 GHz (2×2) + 5 GHz (2×2) mode. For details, contact the product manager.
DC power supply description	If an RTU license is loaded, no function is restricted.
DC power supply description	If no RTU license is loaded, Wi-Fi works in 2.4 GHz (4×4) + 5 GHz (6×6) mode and other functions are not restricted.

15 Years Experience

As a global leading professional Huawei network hardware and solution provider, we have delivered Huawei, ZTE, Nokia, CISCO, Fiberhome, etc, equipment to 500+ customer groups in 90+ countries over the past 15 years. Know more

Premium Quality Guaranteed

Strict 3-Level Quality Control procedure: 1st-Level inspection; 2nd-Level In-stock test; 3rd-Level 24-hour pre-delivery test to guarantee premium quality. Know more

Value over price

What we offer to our customers is value rather than price. We enable customers to enjoy the benefit of our reliable delivery products and generate more value to the greatest extent. Know more

Tailored Technical Support

We provide customers with personalized and professional tech support by remote diagnosis, fault-location and troubleshooting. "We are here to help you instantly when you need it."

Flexible Payment

We continuously offer flexible payment methods such as Wire Transfer, Paypal, L/C, Western Union and Alipay, to help customer enjoy a more convenient shopping experience. Know more

Document Resource

We provide extensive document resources to guide our customers to targetly solve the problem they may meet. Know more

1-Year Warranty Guaranteed

Our products come with 1-year warranty. Customers can ask for a repair, replacement or refund for a major product failure. Know more

Fast Global Shipping

We won't stop to develop rapid and cost effective shipping options, providing the excellent experience to our global customers. Know more

One-Stop Solution

We offer not only network products but also network proposal, mainstream and cost-effective solution to assist customers eliminate the concerns.

Click to enlarge

Back to products

(0 reviews)

PN: 02353GSK Category: AirEngine 6700 Series

Description

Working simultaneously on the 2.4 GHz and 5 GHz frequency bands

By default, the dual-radio mode is supported with 4×4:4 MIMO on 2.4 GHz and 6×6:6 MIMO on 5 GHz.

After an RTU license is loaded, more radio modes are supported.

Dual-radio mode: 2.4 GHz (4×4:4 MIMO) + 5 GHz (8×8:8 MIMO)

Triple-radio mode: 2.4 GHz (4×4:4 MIMO) + 5 GHz (4×4:4 MIMO) + 5 GHz (4×4:4 MIMO)

Dual-radio + independent scanning radio mode: 2.4 GHz (4×4:4 MIMO) + 5 GHz (6×6:6 MIMO)

1 x 10GE electrical port + 1 x GE electrical port + 1 x 10GE SFP+ optical port

Different external antennas based on application scenarios to enhance coverage

Built-in IoT slots, supporting IoT expansion such as BLE 5.0, ZigBee, RFID, and Thread

USB port for IoT expansion

Bluetooth serial interface-based O&M through the built-in Bluetooth module by collaborating with CloudCampus APP; collaboration with a location server to accurately locate Bluetooth terminals and tags

Working modes: Fit, Fat, and cloud management

Huawei AirEngine 6760-X1E is an indoor access point (AP) in compliance with the Wi-Fi 6 (802.11ax) standard. It provides uplink optical and electrical ports, allowing customers to select different deployment modes and saving customers’ investment. These strengths make the AP ideal for scenarios such as enterprise office and education.

Tech Specs

Item	Specification
Installation Type	Wall
	Ceiling
	T-Rail
Dimensions without packaging (H x W x D) [mm(in.)]	61 mm x 220 mm x 220 mm (2.40 in. x 8.66 in. x 8.66 in.)
Weight without packaging [kg(lb)]	1.85 kg (4.08 lb)
Storage	NAND Flash 512 MB; NOR Flash 16 MB
Console port	BLE console
Maximum power consumption [W]	39.9 (excluding USB and IoT cards)
Maximum heat dissipation [BTU/hour]	136.1 (without USB or IoT card)
Power supply mode	DC adapter
Power supply mode	PoE
Rated input voltage [V]	48 V
Input voltage range [V]	DC: 43.2 V to 57.6 V
Input voltage range [V]	PoE: 802.3bt/at
Service port surge protection [kV]	PoE port:
	Differential mode (48 V-RTN): 0.5 kV (1.2/50 us, 42 ohms), criterion B
	Common mode (8 wires to ground): 6 kV (1.2/50 us, 42 ohms), criterion B
Maximum number of physical ports on the entire device	10GE (RJ45) x 1, 10M/100M/1000M/2.5GE/5GE/10GE auto-sensing
	GE (RJ45) x 1, 10M/100M/1000M auto-sensing
	10GE optical port (SFP+), GE/10GE auto-sensing
Long-term operating temperature [°C(°F)]	–10°C to +50°C (14°F to 122°F) (If the altitude is in the range of 1800 m to 5000 m, the temperature decreases by 1°C or 1.8°F every time the altitude increases by 300 m.)
Storage temperature [°C(°F)]	–40°C to +70°C (–40°F to +158°F)
Long-term operating relative humidity [RH]	5% RH to 95% RH
Long-term operating altitude [m(ft.)]	–60 m to +5000 m (–196.85 ft to +16404.20 ft)
Atmospheric pressure [kPa]	53kPa – 106kPa ETSI 300 019-2-3
Ground	Ground
USB	USB 2.0
IoT slot	IoT card
BLE	BLE5.2
Radio number	2/3
Operating frequency band	2.4GHz
Operating frequency band	5GHz
MIMO spatial streams	Triple-radio mode:
	Radio 0 (2.4 GHz): 4×4
	Radio 1 (5 GHz): 4×4 (high frequency band)
	Radio 2 (5 GHz): 4×4 (low frequency band)
	Dual-radio mode:
	Radio 0 (2.4 GHz): 4×4
	Radio 1 (5 GHz): 8×8
Wi-Fi standard	2.4G: 802.11b/g/n/ax
Wi-Fi standard	5G: 802.11a/n/ac/ac Wave 2/ax
Radio interface	External antenna
Antenna gain	Bluetooth: 4 dBi
Maximum transmit power	2.4G: 26 dBm (Max)
	5G: 29 dBm (Max)
	(Note: This is the total MIMO radio power, the same as:
	2.4G: 20 dBm/chain
	5G: 20 dBm/chain)
	Bluetooth: < 10 dBm
Singal radio transmit power [dBm]	2.4G: -10 dBm to 20 dBm/chain
Singal radio transmit power [dBm]	5G: -10 dBm to 20 dBm/chain
MTBF [year]	74 year
MTTR [hour]	0.5 hour
Frequency stability [ppm]	+/-20
802.3bt power supply description	In 802.3bt Class 8 power supply mode:
	If an RTU license is loaded, no function is restricted.
	If no RTU license is loaded, Wi-Fi works in 2.4 GHz (4×4) + 5 GHz (6×6) mode and other functions are not restricted.
	In 802.3bt Class 6 power supply mode:
	– With an RTU license loaded:
	Wi-Fi: If the USB and IoT card slots are not used, the number of spatial streams and transmit power are not affected. If they are used, the number of spatial streams, transmit power, and bandwidth may be affected. For details, contact the product manager.
	Wired network port: not restricted
	Other ports: The USB port and IoT card slot are available. If they are used, the number of spatial streams, transmit power, and bandwidth may be affected. For details, contact the product manager.
	– Without an RTU license loaded:
	Wi-Fi: 2.4 GHz (4×4) + 5 GHz (6×6). The radio transmit power is not affected. If the USB port and IoT card slot are used, the radio working bandwidth may be affected. For details, contact the product manager.
	Wired network port: not restricted
	Other ports: The USB port and IoT card slot are available. If they are used, the radio working bandwidth may be affected. For details, contact the product manager.
802.3at power supply description	With an RTU license loaded:
	Wi-Fi:
	If the USB and IoT card slots are not used, the radio transmit power is not affected.
	Dual-radio mode: 2.4 GHz (2×2) + 5 GHz (4×4)
	Triple-radio mode: 2.4 GHz (2×2) + 5 GHz (2×2, high band) + 5 GHz (2×2, low band)
	Dual-radio + independent radio scanning mode: 2.4 GHz (2×2) + 5 GHz (2×2) + 5 GHz independent radio scanning
	If the USB and IoT card slot are both used, the number of spatial streams, transmit power, and bandwidth may be affected. For details, contact the product manager.
	Wired network port:
	The speed of the 10GE electrical port is reduced to GE or lower. The 10GE electrical port and SFP+ optical port are combo ports, and only one of them is available at the same time. (In V200R021C10 and later versions, the GE electrical port is also available in standard dual-radio mode.)
	Other ports:
	Either the 2.5 W USB port or IoT card slot can be used at the same time. The IoT card slot takes precedence. If both of them are used, Wi-Fi can only work in 2.4 GHz (2×2) + 5 GHz (2×2) mode. For details, contact the product manager.
	Without an RTU license loaded:
	Wi-Fi:
	If no USB or IoT card slot is used, Wi-Fi can work only in 2.4 GHz (2×2) + 5 GHz (4×4) mode, and the radio transmit power is not affected.
	If the USB and IoT card slot are both used, the number of spatial streams, transmit power, and bandwidth may be affected. For details, contact the product manager.
	Wired network port:
	The speed of the 10GE electrical port is reduced to GE or lower. The 10GE electrical port and SFP+ optical port are combo ports, and only one of them is available at the same time. (In V200R021C10 and later versions, the GE electrical port is also available in standard dual-radio mode.)
	Other ports:
	Either the 2.5 W USB port or IoT card slot can be used at the same time. The IoT card slot takes precedence. If both of them are used, Wi-Fi can only work in 2.4 GHz (2×2) + 5 GHz (2×2) mode. For details, contact the product manager.
DC power supply description	If an RTU license is loaded, no function is restricted.
DC power supply description	If no RTU license is loaded, Wi-Fi works in 2.4 GHz (4×4) + 5 GHz (6×6) mode and other functions are not restricted.