![Icon [all products]](https://www.thunder-link.com/tl-content/uploads/2022/05/Icon-all-products-1.svg "Icon [all products]"){kind=icon}
All products
0 in stock Ready to ship
AirEngine 8760R-X1
Huawei AirEngine 8760R-X1 access point AP with 1 x 10 GE electrical, 1 x GE electrical, and 1 x 10 GE SFP+
11
People watching this product now!
Original New Sealed
Original New Sealed x
Original, new and sealed switch; original packaging with seal; won't unpack the product without permission (insert the power module or replace the power supply cable).
Description
The AirEngine 8760R-X1 supports long-distance coverage mode: 2.4GHz (8×8:4)+5GHz (8×8:8), dual radios mode: 2.4GHz (4×4:4)+5GHz (12×12:8), dual radios: 2.4GHz (4×4:4)+5GHz (8×8:8)+ independent radio scanning mode. The three modes can be flexibly switched. The maximum rate is up to 1.15 Gbps at 2.4GHz band, 9.6 Gbps at 5GHz band, and 10.75 Gbps for the device.
The AirEngine 8760R-X1E supports long-distance coverage mode: 2.4GHz (8×8:4)+5GHz (8×8:8), triple radios mode: 2.4GHz (8×8:4)+5GHz (4×4:4)+5GHz (4×4:4), dual radios 2.4GHz (4×4:4)+5GHz (4×4:4)+ independent radio scanning mode. The three modes can be flexibly switched. The maximum rate is up to 1.15 Gbps at 2.4GHz band, 9.6 Gbps at 5GHz band, and 10.75 Gbps for the device.
1 x 10 GE electrical, 1 x GE electrical, and 1 x 10 GE SFP+.
6 KA/6 KV surge protection for Ethernet ports, IP68 waterproof and dustproof design, and –40°C to +65°C wide temperature, fully meeting industrial-grade requirements.
AirEngine 8760R-X1 has flexible built-in smart antennas to provide precise coverage for STAs, reduce interference, and improve signal quality.
The external antenna port of AirEngine 8760R-X1E supports 5 KA surge protection, no need to install an external surge protector, simplifying installation, and minimizing the overall cost.
Independent radio scanning, achieving real-time detection of interference and rogue devices in real time and timely network optimization.
Supports the Fat, Fit, and cloud three working modes.
AirEngine 8760R-X1 and AirEngine 8760R-X1E are Huawei’s next-generation flagship Wi-Fi 6 (802.11ax) outdoor access points (APs). The maximum rate can up to 10.75 Gbps for the device. These outdoor APs stand out with excellent outdoor coverage performance, IP68 waterproof and dustproof design, and strong surge protection capability. AirEngine 8760R-X1 has built-in smart antennas that enable always-on Wi-Fi signals for users. These features significantly enhance users’ wireless experiences. AirEngine 8760R-X1 and AirEngine 8760R-X1E provide uplink 10GE optical and electrical ports, allowing customers to select different deployment modes and saving customers’ investment. These strengths make Huawei’s Wi-Fi 6 outdoor APs ideal for high-density scenarios such as stadiums, squares, pedestrian streets, and amusement parks.
Tech Specs
| Item | Specification |
| Installation Type | Wall |
| Pole | |
| Dimensions without packaging (H x W x D) [mm(in.)] | Diameter x length: 165 mm x 387 mm (6.50 in. x 15.24 in.) |
| Weight without packaging [kg(lb)] | 4.15 kg (9.15 lb) |
| Storage | NAND Flash 512 MB; NOR Flash 16 MB |
| Console port | BLE console |
| Maximum power consumption [W] | 53.2 (excluding PoE OUT) |
| Maximum heat dissipation [BTU/hour] | 181.5 (without PoE OUT) |
| Power supply mode | PoE |
| Input voltage range [V] | PoE: 802.3bt |
| Service port surge protection [kV] | 6 kA in common mode |
| Maximum PoE output power [W] | 15.4 W |
| Maximum number of physical ports on the entire device | 10GE (RJ45) x 1, 10M/100M/1000M/2.5GE/5GE/10GE auto-sensing |
| GE (RJ45) x 1, 10M/100M/1000M auto-sensing | |
| 10GE optical port (SFP+), GE/10GE auto-sensing | |
| Long-term operating temperature [°C(°F)] | –40°C to +65°C (–40°F to +149°F) (If the altitude is in the range of 1800 m to 5000 m, the temperature decreases by 1°C or 1.8°F every time the altitude increases by 300 m.) |
| Storage temperature [°C(°F)] | –40°C to +85°C (–40°F to +185°F) |
| Long-term operating relative humidity [RH] | 0% RH to 100% RH |
| Long-term operating altitude [m(ft.)] | –60 m to +5000 m (–196.85 ft to +16404.20 ft) |
| Atmospheric pressure [kPa] | 53kPa – 106kPa ETSI 300 019-2-3 |
| Ground | Ground |
| Wind resistance | 67 m/s |
| BLE | BLE5.2 |
| Radio number | 2 |
| Operating frequency band | 2.4GHz |
| 5GHz | |
| MIMO spatial streams | Dual-radio standard mode: |
| Radio 0 (2.4 GHz): 4×4:4 | |
| Radio 1 (5 GHz): 12×12:8 | |
| Dual-radio 2G enhanced mode: | |
| Radio 0 (2.4 GHz): 8×8:4 | |
| Radio 1 (5 GHz): 8×8:8 | |
| Dual-radio + independent radio scanning mode: | |
| Radio 0 (2.4 GHz): 4×4:4 | |
| Radio 1 (5 GHz): 8×8:8 | |
| Wi-Fi standard | 2.4G: 802.11b/g/n/ax |
| 5G: 802.11a/n/ac/ac Wave 2/ax | |
| Radio interface | Built-in smart antennas |
| Antenna gain | 2.4G: 10 dBi |
| 5G: 11 dBi | |
| BT: 5 dBi | |
| Beamwidth of the built-in antenna [degrees] | 2.4 GHz: |
| Horizontal plane: 180° @ 6 dB, 70° @ 3 dB | |
| Vertical plane: 40° | |
| 5 GHz: | |
| Horizontal plane: 180° @ 6 dB, 100° @ 3 dB | |
| Vertical plane: 20° | |
| Maximum transmit power | 2.4G: 33 dBm (Max) |
| 5G: 33 dBm (Max) | |
| NOTE: | |
| This is MIMO total radio power, which is the same as: | |
| 2.4G: 24 dBm/chain (Max) | |
| 5G : 24 dBm/chain (Max) | |
| BT: < 10 dBm | |
| Singal radio transmit power [dBm] | 2.4G: -10 dBm to 24 dBm/chain |
| 5G: -10 dBm to 24 dBm/chain | |
| MTBF [year] | 60.2 year |
| MTTR [hour] | 0.5 hour |
| Frequency stability [ppm] | +/-20 |
| 802.3bt power supply description | In 802.3bt Class 8 power supply mode: |
| If the PoE OUT port is not used, no function is restricted. In enhanced dual-radio 2G mode, the 2.4 GHz radio supports 8×8:4 MIMO and a maximum of 20 MHz bandwidth. | |
| If the PoE OUT port (supporting only 802.3af) is used, the 10GE electrical port and the SFP+ optical port work as combo ports, and when one of them is working, the other is unavailable. The GE electrical port is available. Other functions are not restricted. In enhanced dual-radio 2G mode, the 2.4 GHz radio supports 8×8:4 MIMO and a maximum of 20 MHz bandwidth. | |
| In 802.3bt Class 6 power supply mode: | |
| If the PoE OUT port is not used: | |
| Wi-Fi: | |
| The transmit power of radios is not affected. | |
| Standard dual-radio mode: 2.4 GHz (4×4) + 5 GHz (12×12:8) | |
| Dual-radio + independent scanning radio mode: 2.4 GHz (4×4) + 5 GHz (8×8) + 5 GHz independent radio scanning | |
| Enhanced dual-radio 2G mode: 2.4 GHz (8×8:4) + 5 GHz (4×4). In this mode, the 2.4 GHz radio supports 8×8:4 MIMO and a maximum of 20 MHz bandwidth. | |
| Wired network port: | |
| The 10GE electrical port and the SFP+ optical port work as combo ports, and when one of them is working, the other is unavailable. The GE electrical port is available. | |
| Other ports: | |
| The PoE OUT port is not used. | |
| If the PoE OUT port is used: | |
| Wi-Fi: | |
| The transmit power of radios is automatically adjusted. | |
| Standard dual-radio mode: 2.4 GHz (4×4) + 5 GHz (4×4) | |
| Dual-radio + independent scanning radio mode: 2.4 GHz (4×4) + 5 GHz (4×4) + independent radio scanning | |
| Wired network port: | |
| The 10GE electrical port and the SFP+ optical port are combo ports, and only one of them can be selected. The GE electrical port is available. | |
| Other ports: | |
| The PoE OUT port (supporting only 802.3af) is used. | |
| 802.3at power supply description | Wi-Fi: |
| The transmit power of radios is automatically adjusted. | |
| Standard dual-radio mode: 2.4 GHz (2×2) + 5 GHz (2×2) | |
| Dual-radio + independent scanning radio mode: 2.4 GHz (2×2) + 5 GHz (2×2) + independent radio scanning | |
| Wired network port: | |
| The rate of the 10GE electrical port is reduced to GE or lower. The 10GE electrical port and the SFP+ optical port work as combo ports for each other, and when one of them is working, the other is unavailable. The GE electrical port is unavailable. | |
| Other ports: | |
| The PoE OUT port is unavailable. |
Additional information
| Features |
|---|
Reviews (0)
Why Thunder-link.com
Reviews
There are no reviews yet.