in stock Ready to ship
Huawei AirEngine 5760-51 access point with 1 x 5GE + 1 x GE, 1 x USB
Smart antenna array technology enables targeted signal coverage for mobile terminals, reduces interferences, and improves signal quality. Additionally, it implements millisecond-level switchover as STAs move.
USB interface can be used for external power supply, external IoT expansion, and storage.
Built-in IoT slots, supporting IoT expansion such as BLE 5.0, ZigBee, RFID, and Thread.
Supports Bluetooth serial interface-based O&M through built-in Bluetooth and CloudCampus APP, and precise locating of Bluetooth terminals by collaborating with location server.
Supports the Fat, Fit, and cloud three working modes.
AirEngine 5760-51 is a Wi-Fi 6 (802.11ax) standard wireless access point (AP) released by Huawei. AirEngine 5760-51 supports flexible switching between dual-radio and triple-radio modes to serve different customers and traffic types. The device can reach a rate of up to 5.37 Gbps, after loading the RTU license, the device can reach a rate of up to 5.95 Gbps. AirEngine 5760-51 has built-in smart antennas to move Wi-Fi signals with users, significantly enhancing users’ wireless network experience. These strengths make AirEngine 5760-51 ideal for scenarios such as enterprise offices, cafes, and leisure centers.
|Interface type||1 x 5GE + 1 x GE
1 x USB
5GE electrical port can also support 100M/1000M/2.5GE rates.
GE electrical port can also support 10M/100M/1000M rates.
|Internal IoT module||Build in IoT slots: Supporting PCIE cards such as ZigBee, RFID, and Thread.|
|Bluetooth||Build in BLE5.0|
|LED indicator||Indicates the power-on, startup, running, alarm, and fault states of the system.|
|Antenna type||Built-in smart antennas|
|Antenna gain||2.4GHz: 4.5dBi
The gains above are the single-antenna peak gains.
The equivalent antenna gain after all 2.4 GHz or 5 GHz antennas are combined is 3dBi in 2.4 GHz or 4 dBi in 5 GHz.
|Maximum number of SSIDs for each radio||≤ 16|
|Maximum number of users||≤ 1024 (dual-radio) (512/Radio)
≤ 1152 (triple-radio) (128(2.4G Radio)+512(5G Radio1)+512(5G Radio2))
The actual number of users varies according to the environment.
|Maximum transmit power||2.4GHz: 26 dBm (combined power)
5GHz: 26 dBm (combined power)
The actual transmit power depends on local laws and regulations.
|Power increment||1 dBm|
|WLAN features||Compliance with IEEE 802.11ax and compatibility with IEEE 802.11a/b/g/n/ac/ac Wave 2
Basic capabilities: providing 6 spatial streams, achieving up to 5.37 Gbps throughput
RTU license upgrade: providing 8 spatial streams, achieving up to 5.95 Gbps throughput
Maximum ratio combining (MRC)
Space time block code (STBC)
Cyclic Delay Diversity (CDD)/Cyclic Shift Diversity (CSD)
Compliance with 1024-QAM and compatibility with 256-QAM/64-QAM/16-QAM/8-QAM/QPSK/BPSK
Target wake time (TWT)*
Low-density parity-check (LDPC)
Frame aggregation, including A-MPDU (Tx/Rx) and A-MSDU (Tx/Rx)
802.11 dynamic frequency selection (DFS)
Short guard interval (GI) in 20 MHz, 40 MHz, 80 MHz, and 160 MHz modes
Priority mapping and scheduling that are compliant with Wi-Fi multimedia (WMM) to implement priority-based data processing and forwarding. Automatic and manual rate adjustment (the rate is adjusted automatically by default)
WLAN channel management and channel rate adjustment
For detailed management channels, see the Country Code & Channel Compliance Table.
Automatic channel scanning and interference avoidance
Service set identifier (SSID) hiding
Signal sustain technology (SST)
Unscheduled automatic power save delivery (U-APSD)
Control and Provisioning of Wireless Access Points (CAPWAP) in Fit AP mode
Automatic login in Fit AP modeExtended Service Set (ESS) in Fit AP mode
Advanced cellular coexistence (ACC), minimizing the impact of interference from cellular networks
802.11k and 802.11v smart roaming
802.11r fast roaming (≤ 50 ms)
|Network features||Compliance with IEEE 802.3ab
Auto-negotiation of the rate and duplex mode and automatic switchover between the Media Dependent Interface (MDI) and Media Dependent Interface Crossover (MDI-X)
Compliance with IEEE 802.1q
SSID-based VLAN assignment
VLAN trunk on uplink Ethernet ports
Management channel of the AP uplink port in tagged and untagged mode
DHCP client, obtaining IP addresses through DHCP
Tunnel data forwarding and direct data forwarding
Application identification and QoS classification when AP local forwarding (also called direct forwarding), which can significantly improve voice quality for applications such as Skype, QQ, and WeChat
STA isolation in the same VLAN
IPV4/IPV6 access control lists (ACLs)
Link Layer Discovery Protocol (LLDP)
Uninterrupted service forwarding upon CAPWAP channel disconnection in Fit AP mode
Unified authentication on the AC in Fit AP mode
AC dual-link backup in Fit AP mode
Network Address Translation (NAT) in Fat AP mode
IPv6 in Fit AP mode
Soft Generic Routing Encapsulation (GRE)
IPv6 Source Address Validation Improvements (SAVI)
Multicast Domain Name Service (mDNS) gateway protocol
|QoS features||WMM parameter management for each radio
WMM power saving
Priority mapping for upstream packets and flow-based mapping for downstream packets
Queue mapping and scheduling
User-based bandwidth limiting
Adaptive bandwidth management (automatic bandwidth adjustment based on the user quantity and radio environment) to improve user experience
Air interface HQoS scheduling
|Security features||Open system authentication
WEP authentication/encryption using a 64-bit, 128-bit, 152-bit or 192-bit* encryption key
WPA2-PSK authentication and encryption (WPA2 personal edition)
WPA2-802.1X authentication and encryption (WPA2 enterprise edition)
WPA3-SAE authentication and encryption (WPA3 personal edition)*
WPA3-802.1X authentication and encryption (WPA3 enterprise edition)*
WPA-WPA2 hybrid authentication
WPA2-WPA3 hybrid authentication*
Huawei AirEngine 5760-51 Access Point Datasheet 7
WPA2-PPSK authentication and encryption in Fit AP mode
WAPI authentication and encryption*
Wireless intrusion detection system (WIDS) and wireless intrusion prevention system (WIPS), including rogue device detection and countermeasure, attack detection and dynamic blacklist, and STA/AP blacklist and whitelist
802.1x authentication, MAC address authentication, and Portal authentication
Dynamic ARP Inspection (DAI)
IP Source Guard (IPSG)
802.11w Protected Management Frames (PMFs)
|Maintenance features||Unified management and maintenance on the AC in Fit AP mode
Automatic login and configuration loading, and plug-and-play (PnP) in Fit AP mode
Batch upgrade in Fit AP mode
STelnet using SSH v2
SFTP using SSH v2
Remote wireless O&M through the Bluetooth console port
Web local AP management through HTTP or HTTPS in Fat AP mode
Real-time configuration monitoring and fast fault location using the NMS
SNMP v1/v2/v3 in Fat AP mode
System status alarm
Network Time Protocol (NTP) in Fat AP mode
The AP supports bring your own device (BYOD) only in Fit AP mode.
Identifies the device type according to the organizationally unique identifier (OUI) in the MAC address.
Identifies the device type according to the user agent (UA) information in an HTTP packet.
Identifies the device type according to DHCP options.
The RADIUS server delivers packet forwarding, security, and QoS policies according to the device type carried in the RADIUS authentication and accounting packets.
The AP supports the locating service only in Fit AP mode.
Locates Wi-Fi terminals.
Working with the location server to locate rogue devices.
Supports Bluetooth positioning.
The AP supports spectrum analysis only in Fit AP mode.
Identification of more than eight interference sources including Bluetooth devices, microwave ovens, cordless phones, ZigBee devices, game controllers, 2.4 GHz/5 GHz wireless video and audio devices, and baby monitors
Working with the location server to locate interference sources and perform spectrum analysis on them
|Power input||DC: 42.5 V to 57 V
PoE power supply: In compliance with 802.3at/bt.
|Operating temperature||-10℃ to +50℃|
|Storage temperature||–40°C to +70°C|
|Operating humidity||5% to 95% (non-condensing)|
|Altitude||–60 m to +5000 m|
|Atmospheric pressure||53 kPa to 106 kPa|
|Dimensions (Diameter × Height)||220×51mm|
Huawei AirEngine 5760-51 access point with 1 x 5GE + 1 x GE, 1 x USB(2 reviews) | 0