![Icon [all products]](https://www.thunder-link.com/tl-content/uploads/2022/05/Icon-all-products-1.svg "Icon [all products]"){kind=icon}
All products
0 in stock Ready to ship
AP4050DN-HD
Huawei AP4050DN-HD access point with 2*GE port, POE
16
People watching this product now!
Original New Sealed
Original New Sealed x
Original, new and sealed switch; original packaging with seal; won't unpack the product without permission (insert the power module or replace the power supply cable).
Description
802.11ac Wave 2 compliance, MU-MIMO, delivering services simultaneously on 2.4 GHz and 5 GHz frequencies, peak rate of 400 Mbit/s at 2.4 GHz and 867 Mbit/s at 5 GHz, and 1.267 Gbit/s for the device
Embedded with smart antennas purpose-built for high-density scenarios. These antennas can reduce construction costs and mitigate interference between APs.
Dual Ethernet interfaces support link aggregation and traffic load balancing while ensuring link reliability. The Ethernet interface GE0 supports the PoE in function, and the Ethernet interface GE1 supports the PoE out function.
Support for the Fat, Fit, and cloud modes
Support for cloud-based management and O&M of APs and services through SDN controller, reducing O&M costs
Huawei AP4050DN-HD is a wireless access point (AP) that supports 802.11ac Wave 2, 2 x 2 MIMO, and two spatial streams. It provides comprehensive service support capabilities and features high reliability, high security, simple network deployment, automatic AC discovery and configuration, and real-time management and maintenance, which meets network deployment requirements. The AP complies with 802.11n and 802.11ac protocols and can provide gigabit STA access, which greatly improves user experience on wireless networks. It has built-in smart high-density antennas and therefore provides more precise wireless coverage, applicable to indoor high-density stadiums.
Tech Specs
| Item | Description |
| Interface type | GE1/PoE_OUT: 10/100/1000M port that connects to the wired Ethernet. The port allows the AP to provide PoE power supply to downlink devices.
GE0/PoE_IN: 10/100/1000M port that connects to the wired Ethernet and supports PoE input. |
| Antenna type | Built-in dual-band directional antenna (beamwidth: 30 degrees) |
| Antenna gain | 2.4G: 13 dBi
5G: 10 dBi |
| Maximum number of VAPs for each radio | 16 |
| Maximum number of users | Fit AP: ≤ 512
Fat AP: ≤ 512 Cloud AP: ≤ 512 NOTE: The actual number of users varies according to the environment. |
| Maximum transmit power | 2.4 GHz: 22 dBm (combined power)
5 GHz: 22 dBm (combined power) NOTE: The actual transmit power depends on local laws and regulations. |
| Maximum number of non-overlapping channels | 2.4 GHz (2.412 GHz to 2.472 GHz)
5 GHz (5.18 GHz to 5.825 GHz)
NOTE If the AP is delivered to the USA, pay attention to the following on channel and frequency band usage:
|
| Channel rate supported | 802.11b: 1, 2, 5.5, and 11 Mbit/s
802.11a/g: 6, 9, 12, 18, 24, 36, 48, and 54 Mbit/s 802.11n: 6.5 to 400 Mbit/s 802.11ac Wave 2: 6.5 to 867 Mbit/s |
| System memory | 256 MB DDR3L
64 MB NOR FLASH |
| Power input | DC: 12 V ± 10%
PoE power supply: in compliance with IEEE 802.3af/at |
| Maximum power consumption | 11.8 W (in 802.3af PoE or DC mode)
13.9 W (in 802.3at PoE mode, excluding the output power of the PoE_OUT port) NOTE The actual maximum power consumption depends on local laws and regulations. |
| Operating temperature and altitude |
-60 m to +1800 m: -10°C to +50°C 1800 m to 5000 m: Temperature decreases by 1°C every time the altitude increases 300 m. |
| Storage temperature | –40°C to +70°C |
| Operating humidity | 5% to 95% (non-condensing) |
| IP rating | IP41 |
| Atmospheric pressure | 53 kPa to 106 kPa |
| Weight | 1.5 kg |
| Dimensions (H x W x D) | 65 mm x 334 mm x 240 mm |
Additional information
| Features |
|---|
Reviews (0)
Why Thunder-link.com
Reviews
There are no reviews yet.