Tag Archives: OSN 1500

How to do when Occasional Hot Patch Installation Failures?

Summary: When the active system control board on an NG-SDH product of a version listed in Versions Involved in the preceding table starts from a reset, there is a possibility that the patch package module cannot obtain the software version of the active system control board. As a result, software version verification fails when a patch… Read More »

TwitterLinkedInGoogle+FacebookPinterestTumblrStumbleUponRedditShare

Cautions for the Failure to Download Configuration Data on OptiX OSN 1500

Abstract: A user fails to download configuration data to an Huawei OSN 1500 with an interface board of dynamic ports due to the lack of logical configurations on tributary interface boards. As a result, services may be interrupted. Symptom 1:The download fails or partially fails. Dynamic port and service data fail to be downloaded to NEs,… Read More »

How to properly configure the Orderwire on OSN Equipment-part1

Configuring Orderwire To provide the maintenance personnel with a dedicated express orderwire channel, you can configure orderwire for NEs. Prerequisites You must be an NM user with NE operator authority or higher. Procedure 1.     In the NE Explorer, select an NE and choose Configuration > Orderwire from the Function Tree. Click the General tab. 2.     Click Query to query information from the NE. 3.     Set Call… Read More »