Huawei CE8850-32CQ-EI switch with 32x100GE QSFP28, 2x10GE SFP+, without fan box and power module
Click to enlarge
CE8850-32CQ-EI
CE8850-32CQ-EI, 32x100GE QSFP28 2x10GE SFP+
US $11,146.00
Description:
Qty:
3-Level Quality Control x
We provide 3-Level Quality Control procedure: 1-Level inspection; 2-Level In-stock test; 3-Level 24 hour pre-delivery and 1 year warranty. Learn More
8-Year Gold Supplier x
Thunder-link.com, founded in 2011, a leading professional Huawei network hardware and solution provider, service over 100 VIP customers from 50 countries in 8 year. Learn More
Test Report Assured x
In order to avoid hardware malfunction and incompatibility, each equipment will be strictly tested before delivery, the test report will be packed inside equipment and delivery together. Learn More
Overview
Huawei CE8850-32CQ-EI switch with 32x100GE QSFP28, 2x10GE SFP+
Without fan box and power module
Switching capacity: 6.44Tbps
Forwarding capacity: 3200Mpps
Huawei CloudEngine 8800 (CE8800) series switches are 100G Ethernet switches designed for data centers and high-end campus networks. The switches provide high-performance, high-density
100GE/40GE/25GE/10GE ports, and low latency. Using the Huawei VRP8 software platform, CE8800 series switches provide extensive data center service features and high stacking capability. In addition, the
airflow direction (front-to-back or back-to-front) can be changed. CE8800 series switches can work with CE12800/CE8800/CE6800/CE5800 switches to build an elastic, virtualized, high-quality fabric that meets
the requirements of cloud-computing data centers.
Tech Specs
| Specification | ||||
| Fixed Ports | 32x100GE QSFP28, 2x10GE SFP+ | |||
| SDN | Agile Controller | |||
| VMware NSX (Supported only by the CE8861) | ||||
| Network convergence | FCoE | |||
| DCBX, PFC, ETS | ||||
| Programmability | OPS | |||
| Ansible-based automatic configuration and open-source module release | ||||
| Traffic analysis | NetStream | |||
| sFlow | ||||
| VLAN | Adding access, trunk, and hybrid interfaces to VLANs | |||
| Default VLAN | ||||
| QinQ | ||||
| MUX VLAN | ||||
| GVRP | ||||
| Dynamic learning and aging of MAC addresses | ||||
| Static, dynamic, and blackhole MAC address entries | ||||
| Packet filtering based on source MAC addresses | ||||
| MAC address limiting based on ports and VLANs | ||||
| IP routing | IPv4 routing protocols, such as RIP, OSPF, BGP, and IS-IS | |||
| IPv6 routing protocols, such as RIPng, OSPFv3, IS-ISv6, and BGP4+ | ||||
| IPv6 | IPv6 VXLAN over IPv4 | |||
| IPv6 Neighbor Discovery (ND) | ||||
| Path MTU Discovery (PMTU) | ||||
| TCP6, ping IPv6, tracert IPv6, socket IPv6, UDP6, and Raw IP6 | ||||
| Multicast | IGMP, PIM-SM, PIM-DM, MSDP, and MBGP | |||
| IGMP snooping | ||||
| IGMP proxy | ||||
| Fast leaving of multicast member interfaces | ||||
| Multicast traffic suppression | ||||
| Multicast VLAN | ||||
| Multicast VXLAN | ||||
| MPLS | MPLS | |||
| Reliability | Fine-grained microsegmentation isolation(Supported only by the CE8861-4C-EI) | |||
| LACP | ||||
| STP, RSTP, VBST, and MSTP | ||||
| BPDU protection, root protection, and loop protection | ||||
| Smart Link and multi-instance | ||||
| DLDP | ||||
| ERPS (G.8032) | ||||
| Hardware-based Bidirectional Forwarding Detection (BFD)( Supported by the CE8850-64CQ-EI and CE8861) | ||||
| VRRP, VRRP load balancing, and BFD for VRRP | ||||
| BFD for BGP/IS-IS/OSPF/Static route | ||||
| BFD for VXLAN | ||||
| QoS | Traffic classification based on Layer 2 headers, Layer 3 protocols, Layer 4 protocols, and 802.1p priority | |||
| Actions of ACL, CAR, re-marking, and scheduling | ||||
| Queue scheduling algorithms, including PQ, WRR, DRR, PQ+WRR, and PQ+DRR | ||||
| Congestion avoidance mechanisms, including WRED and tail drop | ||||
| Traffic shaping | ||||
| O&M | Network-wide path detection | |||
| 1588v2 (CE8850-64CQ-EI) | ||||
| Telemetry | ||||
| INT(IOAM) and ERSPAN+( Supported only by the CE8861-4C-EI) | ||||
| Statistics on the buffer microburst status | ||||
| VXLAN OAM: VXLAN ping, VXLAN tracert | ||||
| AI Fabric | N/A | |||
| Configuration and maintenance | Console, Telnet, and SSH terminals | |||
| Network management protocols, such as SNMPv1/v2c/v3 | ||||
| File upload and download through FTP and TFTP | ||||
| BootROM upgrade and remote upgrade | ||||
| 802.3az Energy Efficient Ethernet (EEE) | ||||
| Hot patches | ||||
| User operation logs | ||||
| Zero Touch Provisioning (ZTP) | ||||
| Security and management | 802.1x authentication | |||
| Command line authority control based on user levels, preventing unauthorized users from using commands | ||||
| DoS, ARP, and ICMP attack defenses | ||||
| Port isolation, port security, and sticky MAC | ||||
| Binding of the IP address, MAC address, interface and VLAN | ||||
| Authentication methods, including AAA, RADIUS, and HWTACACS | ||||
| Remote Network Monitoring (RMON) | ||||
Reviews
Write a Review
1 reviews
5
5
4
3
2
1
1
0
0
0
0
