Solution, Support

Comparison of ZTE ZXA10 C600 Series Switching and Control Board

comparison-of-zte-zxa10-c600-series-switching-and-control-board

ZTE, is known as a Chinese partially state-owned technology company that specializes in telecommunication. Same as Huawei, engaged in providing network equipment, such as ONTs, OLTs, Switch, etc, and network solutions. In this article, we will compare the switching and control board of the ZTE C600 series OLT.

ZXA10 C600 8 10GE bundle

PN: 21922379

In stock

Ready to ship | 35 sold |

The ZTE C600 series include C600, C650, C680. The switching and control board of the ZXA10 C680 are separated from each other. The switching board is independent of the control board and the ZXA10 C680 provides a maximum of four planes. The switching and control board of the ZXA10 C600/C650 is integrated on the same board. The number of the switchboard and the control board is the same and the ZXA10 C600/C650 provides a maximum of two planes.

According to the latest official ZTE document, the switching and control board applicable to the ZTE C600 series has 6 types of boards. SFUL, SFULV, SFUH, and SFUHV are switching and control integrated boards applicable to C600/C650. IMEP is the control board used on C680; SWUM is the switching board used on C680.

  SFUL SFULV SFUH SFUHV IMEP SWUM
Shelf Type

 

ZXA10 C600/C650 ZXA10 C600/C650 ZXA10 C600/C650 ZXA10 C600/C650 ZXA10 C680 ZXA10 C680
Board Type Switching and Control board Switching and Control board Switching and Control board Switching and Control board Control board Switching board
Front Panel            
Interfaces 1 out-of-band management port (MGMT)

1 maintenance serial port (CONSOLE)

1 USB interface

1 mirror diagnosis network port (DIAG)

1 debugging port (ODB)

1 out-of-band management port (MGMT)

1 maintenance serial port (CONSOLE)

1 USB interface

1 mirror diagnosis network port (DIAG)

1 debugging port (ODB)

1 out-of-band management port (MGMT)

1 maintenance serial port (CONSOLE)

1 USB interface

1 mirror diagnosis network port (DIAG)

1 debugging

port (ODB)

4 10GE/GE Ethernet uplink ports

1 out-of-band management port (MGMT)

1 maintenance serial port (CONSOLE)

1 USB interface

1 mirror diagnosis network port (DIAG)

1 debugging port (ODB)

4 10GE/GE Ethernet uplink ports

1 out-of-band management port (MGMT)

1 maintenance serial port (Console)

1 USB interface

1 mirror diagnosis network port (DIAG)

1 debugging port (0DB)

NA
Functions Supports load sharing mode. Supports load sharing mode. Supports load sharing mode. Supports load sharing mode. Supports hot swapping. Supports load sharing mode.
Supports hot swapping. Supports hot swapping. Supports hot swapping. Supports hot swapping. Supports hot swapping.
Supports 4 OLT slices. Supports 8 OLT slices. Supports 4 OLT slices. Supports 8 OLT slices.

 

 

As the service data switching center and management and control center of the ZXA10 C600/C650, the switching, and control board SFUL/SFULV/SFUH/SFUHV provides the system control and management functions and implements non-blocking data switching between boards. Below shows the operating principle of the switching and control card

Control board IMEP controls and manages the entire C680 system. And the switching card SWUM implements non-blocking data switching between boards

After reading this article, hope you can find a ZTE switching and control board that is more suitable for your needs. If you are still not clear about your requirement, please contact our support team freely: supports@thunder-link.com

Related Posts