My Cart

Mini Cart

CR5D0E5XMF94
CR5D0E5XMF94

CR5D0E5XMF94

PN: 03033GDR
RFQ

Huawei NE 8000 2-Port 50GBase/1-Port 100GBase-QSFP28 FlexE MACsec Physical Interface Card(PIC)

- +
Hardware Tested

Hardware Tested x

In order to avoid hardware malfunction, each equipment will be strictly tested before delivery and the test report will be packed inside equipment and delivered together.Learn More

Hardware Compatibility

Hardware Compatibility x

Backed up by our experienced pre-sales support team, and volume documentation, to avoid purchasing incompatible hardware.

Huawei ME60 System Test Procedure

To ensure Huawei router system we provided works well and customers can plug and play, hardware functionality, main control board version consistency, mother board and daughter board compatibility, all these clause will be tested by Thunder-link.com, befo

How to Upgrade Huawei ME60 Series Router

This article provides instructions and detailed procedures on how to upgrade the ME60 series router

Overview

Huawei NetEngine 8000 2-Port 50GBase/1-Port 100GBase-QSFP28 FlexE MACsec Physical Interface Card(PIC)

Occupies one flexible card slot

Supports the line-rate receiving and transmitting on two 50GE/one 100GE interfaces

Applied to NE8000 M8

 

Huawei CR5D0E5XMF94 is 2-Port 50GBase/1-Port 100GBase-QSFP28 FlexE MACsec Physical Interface Card applied to NE8000 M8, supports the line-rate receiving and transmitting on two 50GE/one 100GE interfaces and supports QSFP28 optical modules on the interfaces. If a 50GE optical module is installed in port 0, ports 0 and 1 are valid, and port 0 is switched to 50GE. If port 1 works in 50GE mode and runs services, port 0 does not support auto-negotiation.

CR5D0E5XMF94 comes with original box, if purchase together with router, it will be will inserted into the router by default when delivery, to economical volume weight; If need delivery separately with original box, please contact Thunder-link.com sales team in advance.

Tech Specs
Specifications
Basic function

Supports two 50GE/one 100GE interfaces

Supports QSFP28 optical modules on the interfaces

Working mode

Full-duplex

Frame format

Ethernet_II, Ethernet_SAP and Ethernet_SNAP

Standards compliance

IEEE 802.3

Breakout supported

To enable the breakout function on a port, run the port split command

Interface rate auto-sensing supported

Supports 40GE/50GE/100GE auto-sensing

Ambient temperature

Long terms: 0°C to 45°C

Short term: -5°C to 55°C

Physical specifications
Dimensions(mm) 19.8 (H)x 193.8 (W) x 209.3 (D)
Weight(kg) 0.8
Power consumption (typical value)(W) 28.8

 

 

 

Matching Products

Reviews
Write Your Own Review
You're reviewing:CR5D0E5XMF94
Your Rating:
Why Thunder-link.com
  •  

  •  

  •  

  •  

  •  

  •  

  •  

  •  

  •