| Functions and Features | |
| Basic function | Occupies one flexible card slot. |
| Supports the line-rate receiving and transmitting on four 10GE/GE interfaces and supports SFP+/SFP optical modules on the interfaces. | |
| Supports FlexE and MACsec feature. | |
| Reliability and availability | Support for hot swap. |
| Restrictions and remarks | 1. By default, the standard Ethernet mode is supported. You can run the flexe enable port port-id command in the system view to switch the port mode to FlexE. The GE port cannot be switched to the FlexE mode. |
| 2. An interface in FlexE mode cannot be connected to a standard 10GE Ethernet interface. | |
| 3. This FlexE mode supports only GE-granularity hard pipes and can only be interconnected with Huawei FlexE ports that use the same protocol as GE-granularity. | |
| Breakout supported | No |
| Interface rate auto-sensing supported | Supports GE/10GE auto-sensing. |
| FlexE supported | Yes |
| Physical port 0 can be added to one group, and port-id ranges from 1000 to 3000. A maximum of six FlexE clients can be created. | |
| Physical port 1 can be added to one group, and port-id ranges from 1000 to 3000. A maximum of six FlexE clients can be created. | |
| Physical port 2 can be added to one group, and port-id ranges from 1000 to 3000. A maximum of six FlexE clients can be created. | |
| Physical port 3 can be added to one group, and port-id ranges from 1000 to 3000. A maximum of six FlexE clients can be created. | |
| Physical specifications | |
| Dimensions without packaging (H x W x D) [mm(in.)] | 19.8 mm x 193.8 mm x 209.3 mm (0.78 in. x 7.63 in. x 8.24 in.) |
| Dimensions with packaging (H x W x D) [mm(in.)] | 70 mm x 285 mm x 300 mm (2.76 in. x 11.22 in. x 11.81 in.) |
| Weight without packaging [kg(lb)] | 0.7 kg(1.54 lb) |
| Weight with packaging [kg(lb)] | 1.1 kg (2.43 lb) |


Reviews
There are no reviews yet.
There are no reviews yet.