![Icon [all products]](https://www.thunder-link.com/tl-content/uploads/2022/05/Icon-all-products-1.svg "Icon [all products]"){kind=icon}
All products
in stock Ready to ship
CR8D00E4XFD0
Huawei NetEngine 8000 F8 4-Port 10GE-SFP+ FlexE MACsec Physical Interface Card(PIC)
16
People watching this product now!
Hardware Compatibility
Hardware Compatibility x
Backed up by our experienced pre-sales support team, and volume documentation, to avoid purchasing incompatible hardware.
Hardware Tested
Hardware Tested x
In order to avoid hardware malfunction, each equipment will be strictly tested before delivery and the test report will be packed inside equipment and delivered together. Learn more
Description
CR8D00E4XFD0, Huawei NetEngine 8000 F8 4-Port 10GE-SFP+ FlexE MACsec Physical Interface Card(PIC).
Applied to Huawei NE8000 F8.
Provides four 10GE/GE interfaces for line-rate transmitting and receiving, and supports SFP+/SFP optical modules, including:
155Mbps eSFP Optical Module
155Mbps eSFP BIDI Optical Module
1.25/9.953/10.3125Gbps SFP+ Optical Module
1.25Gbps eSFP BIDI Optical Module
1.25Gbps eSFP CWDM Optical Module
1.25Gbps eSFP Optical Module
10Gbps SFP+ BIDI Optical Module
10Gbps SFP+ CWDM Optical Module
10Gbps SFP+ DWDM Optical Module
10Gbps SFP+ Optical Module
1Gbps Electrical Module
Supports FlexE and MACsec.
CR8D00E4XFD0 comes with original box, if purchase together with router, it will be will inserted into the router by default when delivery, for economical volume weight; If need delivery separately with original box, please contact Thunder-link.com sales team in advance.
Tech Specs
| Specifications | |
| Basic function | Occupies one flexible interface card slot. |
| Provides four 10GE/GE interfaces for line-rate transmitting and receiving, and supports SFP+/SFP optical modules. | |
| Supports FlexE and MACsec. | |
| Reliability and availability | Hot swappable. |
| Restrictions and remarks | 1. By default, an interface works in standard Ethernet mode. You can run the flexe enable port port-id command in the system view to switch the interface to FlexE mode. An interface working in GE mode cannot be switched to the FlexE mode. |
| 2. When an interface works in FlexE mode, it cannot interconnect with a standard 10GE Ethernet interface. | |
| 3. This FlexE mode supports only GE-granularity hard pipes and supports interconnection only with GE-granularity FlexE interfaces that use the same protocol as the Huawei device. | |
| 4. When the SRU2T is installed on the F8 and the LPU is installed in slot 1, 2, 7, or 8, the subcard can be installed only in PIC0 or PIC2 of the LPU. | |
| Breakout supported | No |
| Interface rate auto-sensing supported | Supports GE/10GE auto-sensing. |
| FlexE supported | Yes |
| Physical port 0 can be added to one group, and port-id ranges from 1000 to 3000. A maximum of six FlexE clients can be created. | |
| Physical port 1 can be added to one group, and port-id ranges from 1000 to 3000. A maximum of six FlexE clients can be created. | |
| Physical port 2 can be added to one group, and port-id ranges from 1000 to 3000. A maximum of six FlexE clients can be created. | |
| Physical port 3 can be added to one group, and port-id ranges from 1000 to 3000. A maximum of six FlexE clients can be created. | |
| Technical specifications | |
| Dimensions with packaging [mm] | 70(H) x 285(W) x 300(D) |
| Weight with packaging [kg] | 1.1 |
| Typical power consumption [W] | 17.4 |
| Typical heat dissipation [BTU/hour] | 56.4 |
| Long-term operating temperature [°C(°F)] | 0°C to 45°C (32°F to 113°F) |
| Short-term operating temperature [°C(°F)] | –5°C to +55°C (23°F to 131°F) |
Additional information
| Weight | 1.1 kg |
|---|---|
| Dimensions | 28.5 × 30.0 × 7.0 cm |
| Port |
1-10 |
| Features |
Q&A
Matching Products…
Reviews (0)
Why Thunder-link.com
Reviews
There are no reviews yet.