![Icon [all products]](https://www.thunder-link.com/tl-content/uploads/2022/05/Icon-all-products-1.svg "Icon [all products]"){kind=icon}
All products
| Functions and Features | |
| Basic function | Provides 20 100GE QSFP28 interfaces on the line side. The rate of each interface can be 100 Gbit/s, 50 Gbit/s, or 40 Gbit/s. |
| Reliability and availability | Hot swappable. |
| Restrictions and remarks | 1. Before removing or inserting a board using an ejector lever, remove the optical modules (2, 5, 7, 9, 12, 15, 17, and 19) close to the ejector lever. |
| 2. The default rate of an interface is 100 Gbit/s. Each interface supports 100GE/50GE/40GE/4x25GE/4x10GE. If the transmission rate of the interface on the optical module does not match the default rate, you can run the port split command to change the rate. | |
| 3. Interfaces 0, 3, 10, and 13 do not support FlexE, and the other interfaces support FlexE. | |
| 4. {1, 2, 4, 5}, {6, 7, 8, 9}, {11, 12, 14, 15}, {16, 17, 18, 19}. Every four 100G interfaces can be bundled into a 400G interface. | |
| Breakout supported | Yes. |
| To enable the breakout function on a port, run the port split command. | |
| Interface rate auto-sensing supported | No |
| FlexE supported | No |
| Physical specifications | |
| Dimensions without packaging (H x W x D) [mm(in.)] | 55.4 mm x 433 mm x 523.2 mm (2.18 in. x 17.05 in. x 20.60 in.) |
| Weight without packaging [kg(lb)] | 10.1 kg (22.27 lb) |
| Weight with packaging [kg(lb)] | 16.0 kg (35.27 lb) |
| Typical power consumption [W] | 584 W |
Reviews
There are no reviews yet.
There are no reviews yet.