![Icon [all products]](https://www.thunder-link.com/tl-content/uploads/2022/05/Icon-all-products-1.svg "Icon [all products]"){kind=icon}
All products
0 in stock 3-5 days lead time
CR8DEANEJXD9
Huawei NE8000 10-Port 100GBase-QSFP28 + 36-Port 10GE(SFP+)/GE(SFP) Integrated Line Processing Unit CM
19
People watching this product now!
Hardware Compatibility
Hardware Compatibility x
Backed up by our experienced pre-sales support team, and volume documentation, to avoid purchasing incompatible hardware.
Hardware Tested
Hardware Tested x
In order to avoid hardware malfunction, each equipment will be strictly tested before delivery and the test report will be packed inside equipment and delivered together. Learn more
Description
Huawei NetEngine 8000 10-Port 100GBase-QSFP28 + 36-Port 10GE(SFP+)/GE(SFP) Integrated Line Processing Unit CM(LPUI-1T3-CM) on Huawei NE8000.
The board provides ten 100G QSFP28 ports and thirty-six 25GE SFP28 ports on the line side.
The rate of each QSFP28 port is 100 Gbit/s/50 Gbit/s/40 Gbit/s, and the rate of each SFP28 port is 25 Gbit/s/10 Gbit/s/1 Gbit/s.
In 10G mode, GE/10GE auto-sensing is supported. Not supported by 100 Gbps QSFP28 ports.
CR8DEANEJXD9 is a 10-Port 100GBase-QSFP28 + 36-Port 10GE(SFP+)/GE(SFP) Integrated Line Processing Unit CM(LPUI-1T3-CM) applied to Huawei NE8000.
CR8DEANEJXD9 comes with original box, if purchase together with router, it will be will inserted into the router by default when delivery, to economical volume weight; If need delivery separately with original box, please contact Thunder-link.com sales team in advance.
Tech Specs
| Functions and Features | |
| Basic function | The line side of the board provides 10 100G QSFP28 ports and 36 10GE SFP+ ports. The rate of each QSFP28 port is 100 Gbit/s, 50 Gbit/s, or 40 Gbit/s, and the rate of each SFP+ port is 10 Gbit/s or 1 Gbit/s. |
| Reliability and availability | Hot swappable. |
| Restrictions and remarks | 1. A 36*10G interface can work in any of the following modes: 10GE LAN, 10GE WAN, and GE. |
| 2. Starting from port 0, every four adjacent ports form a port group. Each port group supports two working modes: | |
| 10GE mode (default): In this mode, each port in a port group can be configured as a 10GE port. | |
| 10GE/GE mode (which can be configured using the port-mode card-id group-id command in the slot view): In this mode, each port in a port group can be configured as a 10GE/GE port. In each port group, 10GE LAN or 10GE WAN is switched by group. The combination of 10GE LAN and 10GE WAN is not supported. | |
| 3. 10GE WAN interfaces support only the master clock. | |
| 4. SFP+ optical modules are used for 10GE ports, SFP optical modules are used for GE ports, and electrical modules are supported by some ports (18, 21, 24, 27, 30, and 33). | |
| 5. The default rate of an port is 100 Gbit/s. Each port supports 100GE/50GE/40GE/4x25GE/4x10GE. If the port transmission rate of an optical module does not match the default rate, you can run the port split command to switch the transmission rate. | |
| 6. {36, 37}, {38, 39}, {40, 41}, {42, 43}, {44, 45}: every two 100G ports can be bonded into a 200G port through FlexE. 400G bonding is not supported. | |
| 7. A fiber extractor is required to remove or insert an optical fiber. | |
| 8. Before inserting or removing a board using an ejector lever, remove the optical module (2, 5, 8, 11, 14, 17, 20, 23, 26, 29, 32, 35, 37, 39, 41, 43 or 45) close to the ejector lever. | |
| Breakout supported | Yes, supported by 100G ports |
| To enable the breakout function on a port, run the port split command. | |
| Interface rate auto-sensing supported | In 10G mode, GE/10GE auto-sensing is supported. |
| Not supported by 100 Gbps QSFP28 ports. | |
| FlexE supported | Yes |
| Physical ports 36 and 37 can be added to the same group. port-id ranges from 1000 to 3000. A maximum of 10 FlexE clients can be created. | |
| Physical ports 38 and 39 can be added to the same group. port-id ranges from 1000 to 3000. A maximum of 10 FlexE clients can be created. | |
| Physical ports 40 and 41 can be added to the same group. port-id ranges from 1000 to 3000. A maximum of 10 FlexE clients can be created. | |
| Physical ports 42 and 43 can be added to the same group. port-id ranges from 1000 to 3000. A maximum of 10 FlexE clients can be created. | |
| Physical port 44 can be added to one group. port-id ranges from 1000 to 3000. A maximum of 10 FlexE clients can be created. | |
| Physical port 45 can be added to one group. port-id ranges from 1000 to 3000. A maximum of 10 FlexE clients can be created. | |
| Physical specifications | |
| Dimensions without packaging (H x W x D) [mm(in.)] | 55.4 mm x 433 mm x 523.2 mm |
| (2.18 in. x 17.05 in. x 20.59 in.) | |
| Weight without packaging [kg(lb)] | 13 kg (28.66 lb) |
| Weight with packaging [kg(lb)] | 17.9 kg (39.46 lb) |
| Typical power consumption [W] | 712 W |
Additional information
| Weight | 17.9 kg |
|---|---|
| Dimensions | 52.5 × 43.5 × 5.5 cm |
| Port |
1-10, 24-40 |
| Features |
Reviews (0)
Why Thunder-link.com
Reviews
There are no reviews yet.