| Front Panel |
|

- Twelve 10GBASE SFP+ optical ports
|
| Version Mapping |
| ES0D0X12SA00 is supported in V100R006C00 and later versions |
| Attributes of a 10GBASE SFP+ port |
| Connector type |
SFP+ |
| Optical port attributes |
Depend on the SFP+ – SFP+ high-speed cable (1 m, 3 m, 5 m, 10 m), QSFP+ – 4*SFP+ high-speed cable (1 m, 3 m, 5 m), SFP+ optical module, or SFP+ optical cable used |
| Standards compliance |
IEEE 802.3ae |
| Frame format |
Ethernet_II, Ethernet_SAP, Ethernet_SNAP |
| Network protocol |
IP |
| Attributes of 10GE optical modules |
| Operating Temperature |
0°C to 70°C (32°F to 158°F) |
| Model |
Transmission Distance (km) |
Standard |
Interface Optical Parameters |
Fiber Type |
| SFP-10G-USR |
≤ 0.1 |
10Gbase-USR |
Center wavelength: 850 nm
Transmit power: -7.3 to -1 dBm
Receiver sensitivity: ≤ -10.7 dBmOverload optical power: 0.5 dBm
Extinction ratio: ≥ 3.0 dB |
Fiber mode: multimode (OM3)
Connector type: LC |
| OMXD30000 |
≤ 0.026 |
10Gbase-SR |
Center wavelength: 850 nm
Transmit power: -7.3 to -1.0 dBm
Receiver sensitivity: ≤-11.1 dBm
Overload optical power: -1.0 dBm
Extinction ratio: ≥ 3.0 dB |
Fiber mode: multimode
Modal Bandwidth: 160 MHz*km
Core diameter: 62.5 μm
Connector type: LC |
| ≤ 0.033 |
Fiber mode: multimode (OM1)
Connector type: LC |
| ≤ 0.066 |
Fiber mode: multimode
Modal Bandwidth: 400 MHz*km
Core diameter: 50 μm
Connector type: LC |
| ≤ 0.082 |
Fiber mode: multimode (OM2)
Connector type: LC |
| ≤ 0.3 |
Fiber mode: multimode (OM3)
Connector type: LC |
| ≤ 0.4 |
Fiber mode: multimode (OM4)
Connector type: LC |
| OSX010000 |
≤ 10 |
10Gbase-LR |
Center wavelength: 1310 nm
Transmit power: -8.2 to 0.5 dBm
Receiver sensitivity: ≤ -12.6 dBm
Overload optical power: 0.5 dBm
Extinction ratio: ≥ 3.5 dB |
Fiber mode: single-mode
Connector type: LC |
| SFP-10G-iLR |
≤ 1.4 |
10GBASE-iLR |
Center wavelength: 1310 nm
Transmit power: -8.2 to 0.5 dBm
Receiver sensitivity: ≤ -14.4 dBm
Overload optical power: 0.5 dBm
Extinction ratio: ≥ 3.5 dB |
Fiber mode: single-mode
Connector type: LC |
| OSXD22N00(linear) |
≤ 0.1 |
10Gbase-LRM |
Center wavelength: 1310 nm
Transmit power: -6.5 to 0.5 dBm
Receiver sensitivity: ≤ -6.5 dBm
Overload optical power: 1.5 dBm
Extinction ratio: ≥ 3.5 dB |
Fiber mode: multimode
Modal Bandwidth: 400 MHz*km
Core diameter: 50 μm
Connector type: LC |
| ≤ 0.22 |
10Gbase-LRM |
Center wavelength: 1310 nm
Transmit power: -6.5 to 0.5 dBm
Receiver sensitivity: ≤ -6.5 dBm
Overload optical power: 1.5 dBm
Extinction ratio: ≥ 3.5 dB |
Fiber mode: multimode
Modal Bandwidth: 500 MHz*km
Core diameter: 62.5 μm
Connector type: LC |
Fiber mode: multimode (OM1, OM2, OM3)
Connector type: LC |
| OSX040N01 |
≤ 40 |
10Gbase-ER |
Center wavelength: 1550 nm
Transmit power: -4.7 to 4.0 dBm
Receiver sensitivity: ≤ -14.1 dBm
Overload optical power: -1.0 dBm
Extinction ratio: ≥ 3 dB |
Fiber mode: single-mode
Connector type: LC |
| SFP-10G-ZR(limiting) |
≤ 80 |
10Gbase-ZR |
Center wavelength: 1550 nm
Transmit power: 0 dBm to 4.0 dBm
Receiver sensitivity: ≤ -24.0 dBm
Overload optical power: -7.0 dBm
Extinction ratio: ≥ 9 dB |
| SFP-10G-ZDWT |
≤ 80 |
DWDM |
Center wavelength: 1529.16 to 1560.61 nm
Transmit power: -1 to 3 dBm
Receiver sensitivity: ≤ -24 dBm
Overload optical power: -1 dBm
Extinction ratio: ≥ 8.2 dB |
| LE2MXSC80FF0(linear) |
≤ 80 |
10Gbase-ZR |
Center wavelength: 1550 nm
Transmit power: 0 to 4.0 dBm
Receiver sensitivity: ≤ -24.0 dBm
Overload optical power: -7.0 dBm
Extinction ratio: ≥ 9 dB |
Fiber mode: single-mode
Connector type: LC |
SFP-10G-BXU1
(Single-fiber bidirectional optical module) |
≤ 10 |
10Gbase-BX |
Center wavelength: Tx1270/Rx1330 nm
Transmit power: -8.2 dBm to 0.5 dBm
Receiver sensitivity: ≤ -14.4 dBm
Overload optical power: 0.5 dBm
Extinction ratio: ≥ 3.5 dB |
Fiber mode: single-mode
Connector type: LC |
SFP-10G-BXD1
(Single-fiber bidirectional optical module) |
Center wavelength: Tx1330/Rx1270 nm
Transmit power: -8.2 dBm to 0.5 dBm
Receiver sensitivity: ≤ -14.4 dBm
Overload optical power: 0.5 dBm
Extinction ratio: ≥ 3.5 dB |
| SFP-10G-ER-SM1330-BIDI (single-fiber bidirectional) |
≤ 40 |
10Gbase-BX |
Center wavelength: Tx1330/Rx1270 nm
Transmit power: 0 dBm to 5 dBm
Receiver sensitivity: ≤ -18 dBmOverload optical power: -9 dBm
Extinction ratio: ≥ 3.5 dB |
| SFP-10G-ER-SM1270-BIDI (single-fiber bidirectional) |
Center wavelength: Tx1270/Rx1330 nm
Transmit power: 0 dBm to 5 dBm
Receiver sensitivity: ≤ -18 dBm
Overload optical power: -9 dBm
Extinction ratio: ≥ 3.5 dB |
| Attributes of SFP+ CWDM optical modules |
| Center Wavelength (nm), Model |
| 1471, SFP-10G-ZCW1471 |
1491, SFP-10G-ZCW1491 |
1511, SFP-10G-ZCW1511 |
1531, SFP-10G-ZCW1531 |
| 1551, SFP-10G-ZCW1551 |
1571, SFP-10G-ZCW1571 |
1591, SFP-10G-ZCW1591 |
1611, SFP-10G-ZCW1611 |
| Specifications |
Encapsulation type: SFP+ |
| Transmission distance: ≤ 70 km |
| Fiber type: single-mode, LC |
| Standard: CWDM |
| Operating temperature: 0°C to 70°C (32°F to 158°F) |
Transmit power: 0 dBm to 4.0 dBm
Receiver sensitivity: ≤ -23.0 dBm
Overload optical power: -7.0 dBm
Extinction ratio: ≥ 8.2 dB |
| Physical specifications |
| Dimensions(W x D x H): |
394.7 mm x 426.8 mm x 35.1 mm (15.5 in. x 16.8 in. x 1.4 in.) |
| Weight: |
2.30 kg (5.07 lb)) |
| Maximum power consumption: |
85 W |
| Environment parameters |
| Operating temperature |
0°C to 45°C (32°F to 113°F) |
| Operating relative humidity |
5% RH to 95% RH (noncondensing) |
| Storage temperature |
-40°C to +70°C (-40°F to +158°F) |
| Storage relative humidity |
5% RH to 95% RH (noncondensing) |
Reviews
There are no reviews yet.
There are no reviews yet.