![Icon [all products]](https://www.thunder-link.com/tl-content/uploads/2022/05/Icon-all-products-1.svg "Icon [all products]"){kind=icon}
All products
inquire lead time
Description
4U height composed by 6xR4875G5 1xSMU02C 1xUIM05D1
Maximum output power: 24 kW
Supports AIU03-63C, AIU03-63D and AIU02-125B as AC input module
Supports AOU03-16C, iAOU03-16B as AC output module
LLVD: 2 x 125 A/1P, 3 x 63 A/1P
BLVD: 5 x 63 A/1P, 4 x 32 A/1P
Site monitoring unit: SMU02C, supports WebUI after installing a specific WiFi module using its USB port
User interface module: UIM05D1
Rectifier: R4850G2/R4850G5/R4875G5/R4850S5/R4850G6
(Optional) Communications expansion module: NIM01C3 or CIM02C
(Optional) Intelligent power distribution unit: iDMU48-300B-17A or iDMU48-300B-17B
The ETP48400-C4B1 is an embedded power system that converts AC power into DC power. It supplies –48 V and –57 V constant voltage to equipment. The maximum capacity of the ETP48400-C4B1 is 24 kW. It can be used at newly built sites and capacity expansion and reconstruction scenarios of existing sites.
Tech Specs
| Technical Specifications | ||
| Environmental specifications | Operating temperature | –40°C to +65°C |
| (When the ambient temperature ranges from –33°C to +55°C, the power system works properly. When the ambient temperature ranges from 55°C to 65°C, the output power linearly derates by 20%. When the ambient temperature is –40°C, the power system can start properly after the AC power supply is connected. There is no requirement on the output voltage waveform at startup.) | ||
| Transport temperature | –40°C to +70°C | |
| Storage temperature | –40°C to +70°C | |
| Operating humidity | 5%–95% RH (non-condensing) | |
| Transportation humidity | 5%–95% RH (non-condensing) | |
| Storage humidity | 5%–95% RH (non-condensing) | |
| Altitude | 0–4000 m | |
| When the altitude ranges from 2000 m to 4000 m, high temperature derating applies and the operating temperature decreases by 1°C for each additional 200 m. | ||
| Others | There is no conductive dust, corrosive gas, or explosion hazard. | |
| Dust, corrosive substances, pests, molds, and other indicators should be controlled in accordance with Class 3.1 requirements in ETSI EN 300 019-1-3 (V2.3.2 or a later version). | ||
| AC input | Input frequency | 45–66 Hz; rated frequency: 50 Hz/60 Hz |
| Power factor | ≥ 0.99 (rated voltage input, 50%–100% load) | |
| DC output | Output voltage range | 48 V mode: –42 V DC to –58 V DC (–53.5 V DC by default) |
| 57 V mode: –48 V DC to –57 V DC (–57 V DC by default) | ||
| Regulated voltage precision | ≤ ±1% | |
| Peak-to-peak noise voltage | ≤ 200 mV (0–20 MHz) | |
| Psophometrically weighted noise voltage | ≤ 2 mV (meets this standard at rated output voltage points of 53.5 V and 57 V) | |
| Current sharing imbalance | ≤ ±5% (20%–100% load) | |
| AC input protection | AC input overvoltage protection threshold | ≥ 300 V AC |
| AC input overvoltage recovery threshold | 290–300 V AC | |
| AC input undervoltage protection threshold | ≤ 80 V AC | |
| AC input undervoltage recovery threshold | 80–90 V AC | |
| DC output protection | DC output overvoltage protection threshold | Range: –58.5 V DC to –60.5 V DC |
| Structure | Power system dimensions (H x W x D) | 175 mm x 482.6 mm x 330 mm |
| Weight | ≤ 19 kg (excluding rectifiers) | |
| IP rating | IP20 | |
| Installation mode | Installed in a 19-inch rack | |
| Cabling mode | Routed in and out from the front | |
| Maintenance mode | Maintained from the front | |
| Cooling mode | Free cooling | |
| System Specifications | ||
| Number of AC inputs | One AC input: Install an AC output module in the space for the AC module. | |
| Two AC inputs: Install an AC input module in the space for the AC module. (The two AC input modules are switched manually and locked by a mechanical part.) | ||
| AC input module | AIU03-63C(02312KUQ-002) Specifications: 63 A/3P + N terminal Input System: 220/380 V AC three-phase four-wire Maximum Capacity: 24 kW |
|
| AIU03-63D(02312MMH-002) Specifications: 63 A/4P Input System: 220/380 V AC three-phase four-wire Maximum Capacity: 24 kW |
||
| AIU02-125B(02312MKG) Specifications: 125 A/2P Input System: 110 V AC dual–live wire, compatible with 220 V AC single-phase Maximum Capacity: 18 kW |
||
| AC output module | AOU03-16C(02312WSX) Specifications: 3 x 16 A/1P circuit breaker |
|
| iAOU03-16B(02312WSX-001) Specifications: 2 x 16 A/1P circuit breakers + 1 x AC meter (48 V power supply) |
||
| DC output branch (default configuration before delivery) | LLVD: 2 x 125 A/1P, 3 x 63 A/1P | |
| BLVD: 5 x 63 A/1P, 4 x 32 A/1P | ||
| Battery branch (default configuration) | 4 x 125 A/1P | |
| Monitoring module | SMU02C | |
| Rectifier | R4850G2/R4850G5/R4875G5/R4850S5/R4850G6 | |
| Communications expansion module | NIM01C3/CIM02C | |
| Surge protection | AC surge protection: nominal surge discharge current: 30 kA (8/20 µs), five times respectively in the positive and negative directions | |
| DC surge protection: 10 kA (8/20 µs) in differential mode, 20 kA (8/20 µs) in common mode | ||
Reviews (0)
Why Thunder-link.com
Reviews
There are no reviews yet.