Q: What are the differences between different Upstream interface board (uplink board)?
A:
| Board |
Clock Feature |
Port |
Whehter the Port Supports Pluggable Module |
Corresponding Control Board |
| Optical Module |
Electrical Module |
| H801GICF |
× |
Two GE ports |
√ (SFP) |
√ (SFP) |
SCUN/SCUL/SCUH |
| H801GICG |
× |
Two GE electrical ports |
× |
× |
SCUN/SCUL/SCUH |
| H801GICK |
GE synchronous Ethernet |
Two GE ports |
√ (SFP) |
× |
SCUN/SCUL/SCUF/SCUH |
| H801GSCA |
GE synchronous Ethernet |
Four GE ports |
√ (SFP) |
× |
SCUB/SCUF/SCUH |
| H801X1CA |
× |
One 10GE port |
√ (XFP) |
× |
SCUN/SCUF/SCUL/SCUH |
| H801X2CA |
× |
Two 10GE ports |
√ (XFP) |
× |
SCUN/SCUL/SCUH |
| H801X2CS |
10GE synchronous Ethernet |
Two 10GE ports |
√ (SFP+) |
× |
SCUN/SCUF/SCUL/SCUH |
| H802P2CA |
× |
Two PON ports |
√ (SFP) |
× |
SCUB/SCUN |
Q: Can I get 10G Upstream interface board?
A: Yes, we have X2CS card (2 10GE uplink ports).
Q: Can I have 1000 Base-X as uplink?
A: Yes, instead of GICG uplink board you can purchase GICF uplink board.
Q: Can I use OLT main control board SCUN as uplink so as to save the uplink board cost?
A: Yes, you can, but we don’t suggest, as Huawei OLT SCUN load balance is not well supported, so most customers are using SCUN in active/standby mode, if OLT lose power, which SCUN will work as the active SCUN will be randomly, which may affect service, also if the link is down, the active SCUN will not shift to the standby SCUN (it will only shift when SCUN board is down), then service may get affected also.
Q: Can I get technical support from thunder-link.com if we purchase GICG from you?
A: We will able to provide technical support service for customers whose OLT and optical interface card are both from us, kindly note we will charge for the technical support service. We suggests customers purchase the OLT and GICG card from the same professional supplier so as to avoid compatible and technical issues.
Hogan Milton
Portugal
GICG comes with a test report, making it a pleasant purchasing experience.