Huawei S6730-H series switch includes S6730-H24X6C and S6730-H48X6C, provide 10G and 40G by default, but if 100G is required, L-100GEUPG-S67H (100G RTU license) needs to be loaded and activated. This aticle will guide you to active 100G license step by step.

S6730-H48X6C

PN: 02353FWL

Rated 4.92 out of 5

In stock

Ready to ship | 105 sold | 2 QA

Read more

Example for Configuring the TFTP Client

Networking Diagram

Networking diagram for managing files when the device functions as a TFTP client

Networking Requirements

As shown in Networking Diagram the remote device at 10.1.1.1/24 functions as the TFTP server. The device at 10.2.1.1/24 functions as the TFTP client. Routes between the device and the server are reachable. The device needs to be upgraded. To upgrade the device, you must download system software devicesoft.cc from and upload the configuration file vrpcfg.zip to the TFTP server.

Configuration Roadmap

1. Run the TFTP software on the TFTP server and configure the working directory.
2. Run TFTP commands to download ccfrom and upload vrpcfg.zip to the TFTP server.

Procedure

1. Run the TFTP software on the TFTP server and configure the working directory. (For details, see related third-party documentation.)
2. Run TFTP commands to download ccfrom and upload vrpcfg.zip to the TFTP server.
3. <HUAWEI>tftp 10.1.1.1 get devicesoft.cc
4. Info: Transfer file in binary mode.
5. Downloading the file from the remote TFTP server. Please wait…
6. TFTP: Downloading the file successfully.
7. 23876556 bytes received in 199 seconds.
8. <HUAWEI> tftp 10.1.1.1 put vrpcfg.zip
9. Info: Transfer file in binary mode.
10. Uploading the file to the remote TFTP server. Please wait…|
11. TFTP: Uploading the file successfully. 7717 bytes send in 1 second.
12. Verify the configuration.

# Run the dir command on the TFTP client to check that the devicesoft.cc file has been downloaded successfully.

<HUAWEI> dir

Directory of flash:

Idx  Attr     Size(Byte)  Date        Time       FileName

0  -rw-             14  Mar 13 2012 14:13:38   back_time_a

1  drw-              –  Mar 11 2012 00:58:54   logfile

2  -rw-              4  Nov 17 2011 09:33:58   snmpnotilog.txt

3  -rw-         11,238  Mar 12 2012 21:15:56   private-data.txt

4  -rw-          7,717  Mar 12 2012 21:15:54   vrpcfg.zip

5  -rw-             14  Mar 13 2012 14:13:38   back_time_b

6  -rw-      23,876,556  Mar 13 2012 14:24:24   devicesoft.cc

7  drw-              –  Oct 31 2011 10:20:28   sysdrv

8  drw-              –  Feb 21 2012 17:16:36   compatible

9  drw-              –  Feb 09 2012 14:20:10   selftest

10  -rw-         19,174  Feb 20 2012 18:55:32   backup.cfg

11  -rw-         43,496  Dec 15 2011 20:59:36   20111215.zip

12  -rw-            588  Nov 04 2011 13:54:04   servercert.der

13  -rw-            320  Nov 04 2011 13:54:26   serverkey.der

14  drw-              –  Nov 04 2011 13:58:36   security

…

65,233 KB total (7,289 KB free)

# Access the working directory on the TFTP server and check that the vrpcfg.zip file has been uploaded successfully.

Installing Licenses

Prerequisites

You have obtained and uploaded the license file to the device

Procedure

• The license needs to be activated for the first time.

Run the license active file-name command to activate the license. If the following information is displayed, the license is activated successfully.

<HUAWEI> license active license-test.dat

Info: The license is being activated. Please wait for a moment.

Info: Succeeded in activating the license file on the master board.

• The current license file needs to be updated.

Run the license active file-name command to activate the license.

Note: If the specifications of the new license file are lower than those of the current license file (some functions are authorized in the current license file, but not in the new license file, or the new license file allows fewer resources than the current one), the system displays a message asking you whether to continue. If you choose N, the system retains the current license file. If you choose Y, the system uses the new license file. In this case, check whether the configuration items required by services exist in the new license file. If not, apply for a correct license file and activate it. Otherwise, services may be interrupted due to lack of dependent license configuration items after the device is restarted.

Follow-up Procedure

Most licenses take effect immediately after being activated, without the need to restart the switch. A few licenses take effect only after a command is configured and the switch is restarted. For example, to upgrade 40GE QSFP28interfaces to 100GE interfaces using a license, activate the license, run command, and restart the switch for the license to take effect. In versions earlier than V200R020C00, the command format is assign port-speed 100GE [ slot slot-id | all ] .In V200R020C00 and later versions, the command format is assign port-type 100GE [ slot slot-id | all].