How to increase the bandwidth of a base-board or subcard CPU on VSUF NAT board?

Huawei ME60 NAT service board VSUF-80/VSUF-160/VSUI-160-E CPU default bandwidth is 20 Gbit/s, subcard CPU is 40 Gbit/s, VSUI-400A/VSUI-400/VSUI-400A-E/VSUI-400-E is 0 Gbit/s. If you want to increase the CPU bandwidth, firstly you should have license LCR54020G00, 20G NAT Bandwidth and make it activated. Then Execute command line of active nat bandwidth-enhance, for details, you can refer to below contents.

active nat bandwidthenhance

The active nat bandwidthenhance command increases the bandwidth of a base-board or subcard CPU on a NAT service board.

The undo active nat bandwidthenhance command restores the default bandwidth configuration.


active nat bandwidthenhance slot slot-id engine engine-id

active nat bandwidthenhance slot slot-id card card-id

active nat bandwidthenhance bandwidth slot slot-id

undo active nat bandwidthenhance slot slot-id [ engine engine-id ]

undo active nat bandwidthenhance slot slot-id [ card card-id ]

undo active nat bandwidthenhance bandwidth slot slot-id


The license file that defines bandwidth resources has been activated.


# Activate the bandwidth of CPU 0 for the VSUF-80/VSUF-160/VSUI-160-E in slot 1 to 40 Gbit/s.

<HUAWEI> system-view
[~HUAWEI] license
[~HUAWEI-license] active nat bandwidth-enhance slot 1 engine 0

# Activate the 40 Gbit/s bandwidth resources on the base-board CPU with ID 0 on a VSUI-160-E in slot 1.

<HUAWEI> system-view
[~HUAWEI] license
[~HUAWEI-license] active nat bandwidth-enhance slot 1 card 0

# Increase the bandwidth of the VSUI-400A/VSUI-400/VSUI-400A-E/VSUI-400-E in slot 1 to 100 Gbit/s.

<HUAWEI> system-view
[~HUAWEI] license
[~HUAWEI-license] active nat bandwidth-enhance 100 slot

If you have other questions about ME60 configurations or any needs for Huawei router, you can contact us.

Related Posts