Support

ZXCTN 6180H Test Procedure via SecureCRT

  • Posted by author-avatar
How to test ZXCTN 6180H via SecureCRT
09 Jul

ZTE ZXCTN 6180H is a Packet Transport Network (PTN) device, classified as a carrier-grade transmission network equipment. It is primarily used for mobile back-haul and multi-service bearer networks in telecom operator infrastructures. This article will describe how to login ZXCTN 6180H and check its firmware version, hardware info, and optical info, which is a brief test guidance, and includes some common used command line.

COM port login, Baud rate 115200

Account: who

Password: Who_234

ZXCTN6180

1, Show version

Show version

2, Show processor

Show CPU

3, Show firmware-compatibility

Show firmware

4, Show hardware

Show hardware

5, Show product_info all

Show product info

You can also check optical info and interface decription according to commands of show optical-info, show optical-info brief, show ip interface brief, show interface brief, show interface description, show alarm current.Not only ZTE,  we also have Huawei optical transmission device OSN6800 0SN8800 and 0SN9800 test and upgrade guide, meanwhile you can contact supports@thunder-link.com for a quick answer.
Newer Why Nokia 3HE04824AA Optical Module Doesn’t Work in OLT Uplinks?
Back to list
Older How to Install NetStar on iMaster NCE？