In order to enable customers better understand the general instructions of GPON boards, this article lists some commands of GPON service boards (such as GPBD / GPFD, etc.) used on OLTs.
But due to the different association of MA5680T / 5683T / 5608T/MA5800 boards, and the software version of the system is slightly different, so the command will be changed accordingly.
1. login the OLT by console or telnet
>>User name:admin >>User password: Huawei Integrated Access Software (MA5680T). Copyright(C) Huawei Technologies Co., Ltd. 2002-2013. All rights reserved. ----------------------------------------------------------------------------- User last login information: ----------------------------------------------------------------------------- Access Type : Telnet IP-Address : 11X.11X.11X.11X Login Time : 2016-09-28 13:26:38+08:00 Logout Time : 2016-09-28 13:30:10+08:00 -----------------------------------------------------------------------------
The default user name is admin, and user password is root123, please remember modify it for safety.
2. enter the enable mode
Huawei-Thunder-OLT01-MA5680T>enable
3. enter the config mode
Huawei-Thunder-OLT01-MA5680T#config
4. show current config : include all your config
Huawei-Thunder-OLT01-MA5680T(config)#display current-configuration { <cr>|ont<K>|port<K>|section<K>|service-port<K>|simple<K>||<K> }: Command: display current-configuration [MA5600V800R013: 3910] # ......
5. show the version of OLT
Huawei-Thunder-OLT01-MA5680T(config)#display version VERSION : MA5600V800R013C10 PATCH : SPC219 PRODUCT : MA5680T Active Mainboard Running Area Information: -------------------------------------------------- Current Program Area : Area B Current Data Area : Area B Program Area A Version : MA5600V800R013C10 Program Area B Version : MA5600V800R013C10 Data Area A Version : MA5600V800R013C10 Data Area B Version : MA5600V800R013C10 -------------------------------------------------- Standby Mainboard Running Area Information: -------------------------------------------------- Current Program Area : Area B Current Data Area : Area B Program Area A Version : MA5600V800R013C10 Program Area B Version : MA5600V800R013C10 Data Area A Version : MA5600V800R013C10 Data Area B Version : MA5600V800R013C10 -------------------------------------------------- Uptime is 468 day(s), 8 hour(s), 9 minute(s), 2 second(s)
6. show the version of board
Huawei-Thunder-OLT01-MA5680T(config)#display version 0/9 Main Board: H801SCUN --------------------------------------- PCB Version: H801SCUN VER B Base BIOS Version: 309 Extended BIOS Version: 318 Software Version: MA5600V800R013C10 Logic Version: (U48)119 MAB Version: 0002 Huawei-Thunder-OLT01-MA5680T(config)#display version 0/15 Send message for inquiring board version successfully, board executing... Main Board: H802GPBD --------------------------------------- Pcb Version: H802GPBD VER B Mab Version: 0000 Logic Version: (U50)701(U25)008(U26)008(U49)023
7. show all board states
Huawei-Thunder-OLT01-MA5680T(config)# display board 0 ------------------------------------------------------------------------- SlotID BoardName Status SubType0 SubType1 Online/Offline ------------------------------------------------------------------------- 0 1 H805GPBD Normal 2 H806GPBD Normal 3 4 H802GPBD Normal 5 H806GPBD Normal 6 H805GPFD Normal 7 H805GPFD Normal 8 H805GPFD Normal 9 H801SCUN Active_normal 10 H801SCUN Standby_normal 11 H805GPFD Normal 12 H805GPFD Normal 13 H805GPFD Normal 14 H802GPBD Normal 15 H802GPBD Normal 16 H805GPBD Normal 17 H805GPBD Normal 18 H807GPBD Normal 19 H801GICF Normal 20 H801GICF Normal 21 H801PRTA Normal 22 H801PRTA Normal ------------------------------------------------------------------------- Status: Normal : this board is fine ; offline : your board not online ; autofind: you just add one new board ,you should confirm it to the OLT .
8. show one board states
Huawei-Thunder-OLT01-MA5680T(config)#display board 0/15 --------------------------------------- Board Name : H802GPBD Board Status : Normal ------------------------------------------------------------------------------ Power Status Power-off cause Power-off Time ------------------------------------------------------------------------------ POWER-ON - - ------------------------------------------------------------- Port Port min-distance max-distance Optical-module type (km) (km) status ------------------------------------------------------------- 0 GPON 0 20 Online 1 GPON 0 20 Online 2 GPON 0 20 Online 3 GPON 0 20 Online 4 GPON 0 20 Online 5 GPON 0 20 Online 6 GPON 0 20 Online 7 GPON 0 20 Online ----------------------------------------------------------------------------- F/S/P ONT SN Control Run Config Match Protect ID flag state state state side ----------------------------------------------------------------------------- 0/15/0 0 488659467AGC7429 active online normal match no 0/15/0 1 484879467AF59F21 active online normal match no 0/15/0 2 48477946C156FE68 active offline initial initial no
9. enter the gpon board
Huawei-Thunder-OLT01-MA5680T(config)#interface gpon 0/15 Huawei-Thunder-OLT01-MA5680T(config-if-gpon-0/15)#
10. show the port states
Huawei-Thunder-OLT01-MA5680T(config-if-gpon-0/15)#display port state all ---------------------------------------------------------------------------- F/S/P 0/15/0 Optical Module status Online Port state Online Laser state Normal Available bandwidth(Kbps) 1135952 Temperature(C) 40 TX Bias current(mA) 6 Supply Voltage(V) 3.26 TX power(dBm) 4.01 Illegal rogue ONT Inexistent Max Distance(Km) 20 Wave length(nm) 1490 Fiber type Single Mode Length(9?m)(km) 20.0 ---------------------------------------------------------------------------- F/S/P 0/15/1 Optical Module status Online Port state Online Laser state Normal Available bandwidth(Kbps) 1195431 Temperature(C) 43 TX Bias current(mA) 6 Supply Voltage(V) 3.25 TX power(dBm) 3.74 Illegal rogue ONT Inexistent Max Distance(Km) 20 Wave length(nm) 1490 Fiber type Single Mode Length(9?m)(km) 20.0
Or
Huawei-Thunder-OLT01-MA5680T(config-if-gpon-0/15)#display port state 3 ---------------------------------------------------------------------------- Port Information ---------------------------------------------------------------------------- F/S/P 0/15/3 Port state Online Last down cause LOS Last up time 2016-09-18 00:23:31+08:00 Last down time 2016-09-18 00:20:47+08:00 Signal detect Normal Available bandwidth(Kbps) 1210408 Illegal rogue ONT Inexistent ---------------------------------------------------------------------------- Optical Module State ---------------------------------------------------------------------------- Optical Module status Online Laser state Normal TX fault Normal Temperature(C) 39 TX Bias current(mA) 11 Supply Voltage(V) 3.27 TX power(dBm) 3.54 ---------------------------------------------------------------------------- Optical Module Static Information ---------------------------------------------------------------------------- Module type GPON Module sub-type CLASS B+ Used type OLT Encapsulation Type SFP SFF-8472 Compliance Includes functionality described in Rev 9.5 Max Distance(Km) 20 Max rate(Kbps) 2500000 Rate Identifier Unspecified(0x0) Wave length(nm) 1490 Fiber type Single Mode Identifier SFP or SFP Plus ---------------------------------------------------------------------------- Optical Module Threshold Parameter ---------------------------------------------------------------------------- Rx power warning threshold(dBm) [-27.0,-9.0] Rx power alarm threshold(dBm) [-28.0,-8.0] Tx power warning threshold(dBm) [1.0,5.0] Tx power alarm threshold(dBm) [0.5,5.5] Temperature warning threshold(C) [-8,75] Temperature alarm threshold(C) [-13,80] ----------------------------------------------------------------------------
11. shutdown the PON port
You can shutdown this board all port or one of port. That will break off all the ONT on PON port
Huawei-Thunder-OLT01-MA5680T(config-if-gpon-0/15)# shutdown ? --------------------------------------------- Command of gpon-0/15 Mode: --------------------------------------------- all All ports portid<U><0,7> Port ID Huawei-Thunder-OLT01-MA5680T(config-if-gpon-0/15)#shutdown 3
12. open the PON port
Huawei-Thunder-OLT01-MA5680T(config-if-gpon-0/15)#undo shutdown 3
Through the above demonstration, we have mastered the daily operation instructions of the main GPON board GPFD and GPBD of Huawei MA5600T series OLT. These are some simple and basic instructions; I believe everyone can handle it. If you need more information, please contact our sales team and technical team.