Q: What are the system specifications differences among MA5800 series OLT?
A:
| Item |
MA5800-X17 |
MA5800-X15 |
MA5800-X7 |
MA5800-X2 |
| Switching capacity of the control board |
H901MPLA/H901MPLB: 7 Tbit/s |
H901MPSC: 480 Gbit/s |
| Maximum bandwidth per service slot (load sharing mode) |
H901MPLA: 100 Gbit/s
H901MPLB: 200 Gbit/s |
H901MPSC: 80 Gbit/s |
| Maximum number of concurrent 4K video users |
16000 |
8000 |
2000 |
Q: What are the physical specifications differences among MA5800 series OLT?
A:
| Item |
MA5800-X17 |
MA5800-X15 |
MA5800-X7 |
MA5800-X2 |
| Rack type |
21inch |
19inch |
| Maximum weight(including mounting brackets) |
45kg |
35kg |
26kg |
9.4kg |
| Maximum input current |
60A |
40A |
DC power supply: 20A
AC power supply: 8 A |
Q: What are the maximum number of ports in MA5800 series subrack?
A:
| Item |
MA5800-X17 |
MA5800-X15 |
MA5800-X7 |
MA5800-X2 |
| GPON ports |
272 |
240 |
112 |
32 |
| 10G GPON ports |
136 |
120 |
56 |
16 |
| GE/FE ports |
816 |
720 |
336 |
32 |
| 10GE ports |
136 |
120 |
56 |
16 |
| E1 ports |
544 |
480 |
224 |
64 |
Q: What is the great improvement of MA5800?
A: Great improvement:
- Symmetric 10G GPON (XGS PON): Supports XGS PON , Improves the upstream bandwidth from 2.5G to 10G and enhances symmetric service supporting.
- ONT energy saving: Supports the ONT sleep mode. Reduces ONU power consumption for environmental protection.
- 8 times MAC address and ARP table than MA5680T and MA5683T.
Q: Does MA5800 have new typical New Hardware Board?
A: Yes, H901TWED, 8-port symmetric 10G GPON interface board, it works together with the optical network terminal (ONT) to provide 10G GPON access services.
Q: How to configure Ring Check of the MA5800?
A: The Ring Check feature enables the device to send the Ring Check packets periodically and monitors the Ring Check packets received on the user-side, cascade-side, and network-side to detect whether a loop occurs on the network of the carrier. If a loop occurs, the MA5800 deactivates the subscriber port on the loop and reports the corresponding alarm to the NMS. This ensures that the device runs in the normal state and that legal users are not affected.
- Run the ring check enable command to enable the user-side ring network detection.
- Run the ring check uplink detection enable command to enable the network-side ring network detection.
- Run the ring check cascade detection enable command to enable the cascade-side ring network detection.
Q: Why switchover occurs between the active and standby boards?
A: Possible Causes:
- The active/standby switchover command is manually executed.
- The original active control board is faulty.
- The physical port or line on the original active control board is faulty.
- The active control board is faulty, causing a protective switchover of the system.
- The clock daughter board of the original control board is faulty.
- The system performs a periodical switchover.
Q: How many 10 GE ports on MA5800?
A: 8 x 10 GE SFP+ interface or 8 x GE SFP/eSFP interface.
Q: Can MA5800 support 4K video?
A: Each sub-rack supports up to 32K users with 100 Mbit/s of non-blocking bandwidth, letting everyone enjoy seamless 4K video.
Q: Does MA5800 support the Multicast?
A: Yes, it supports Layer 3 multicast networking, also supports IPv4 PIM SSM.
- Protocol Independent Multicast-Source-Specific Multicast (PIM-SSM) enables a user host to rapidly join a multicast group if the user knows a multicast source address. PIM-SSM sets up a shortest path tree (SPT) from a multicast source to a multicast group, while PIM-SM uses rendezvous points (RPs) to set rendezvous point trees (RPTs). Therefore, PIM-SSM implements a more rapid join function than PIM-SM.
- Different from the any-source multicast (ASM) model, the SSM model does not need to maintain an RP, construct an RPT, or register a multicast source.
- The SSM model is based on PIM-SM and IGMPv3. The procedure for setting up a multicast forwarding tree on a PIM-SSM network is similar to the procedure for setting up an SPT on a PIM-SM network. The receiver’s DR, which knows the multicast source address, sends Join messages directly to the source so that multicast data streams can be sent to the receiver’s designated router (DR).
Q: Does MA5800 support the VPLS?
A: The Virtual Private LAN Service (VPLS), also called the Transparent LAN Service (TLS) or virtual private switched network service, is a Layer 2 VPN (L2VPN) technology that is based on Multi-Protocol Label Switching (MPLS) and Ethernet technologies.
Marceli
Thank you for all your support. We bought X15 with 2*CGHF together to upgrade our network.
Bategereza
Huawei OLT offers more exceptional stability than other vendors’, even in the most challenging network conditions
Alba
I purchased the OLT and I really like it, very convenient to use.
Dejan
Croatia
We got two MA5800 at their promotion perid, only 890USD, brand-new, great.
Mendoza
Brazil
There’s no other spam configure records in the MA5800-X15 system, it is factory settings.
Andres
Chile
Everything arrives in perfect condition… perfect as always.
Mishra
Nepal
You guys assist me to upgrade the firmware, appreciated.
Kestutis
Lithuania
The product have been working flawlessly.
Martin
Czech Republic
We bought MA5800 X15 together with 7 PON cards together. Shipping is fast.
Kaplan
Slovakia
Will surely order again from you guys.
Shabin Ghimire
United States (US)
I bought ONT for my client for the first time and chose thunder-link.com, but the logistics are a bit slow
Adnan
XK
Everything is okay except too heavy.
Beltran
Argentina
Thunder-link.com shares me some photos and videos when they test and upgrade my MA5800 X15 in their test lab.They really do great job in technical service and product quality, very responsible and professional.Which change my bad impression on Chinese dealers.
Gilbert
Portugal
I ordered 2 units of Huawei MA5800 X15 and think highly of its advanced features.
Jimenez
Germany
We inquired 3 vendors at the time, Thunder-link.com MA5800 X15 price is 200USD higher than the other two, but because their professional technical support, and goods 3-layer test, we final chose them.
Július
India
We do not have any experience with setting up MA5800X15 before. We get very professional support with connecting and configuring this OLT. Very much appreciate.
Pedro Aido
Spain
Cargo arrived in good conditions. But why is an error message displayed when MA5800 X15 is added to the U2000?
Barba
Chile
Huawei NG-OLT MA5800 series equipment performs better than MA5600T series.
Jimenez
United Kingdom (UK)
We inquired 3 vendors at the time, Thunder-link.com MA5800 X15 price is 200USD higher than the other two, but because their professional technical support, and goods 3-layer test, we final chose them.
Gilbert
United States (US)
I ordered 2 units of Huawei MA5800 X15 and think highly of its advanced features.
Beltran
Pakistan
Thunder-link.com shares me some photos and videos when they test and upgrade my MA5800 X15 in their test lab.They really do great job in technical service and product quality, very responsible and professional.Which change my bad impression on Chinese dealers.
Ramirez
Mexico
We finally decide to use Huawei NG-OLT MA5800 X15, it performs 10 times slot bandwidth, 8 times MAC address, 8 times ARP table than MA5680T.Also we do not need to buy SCUH, which is too expensive.
Evgenios
Kenya
I would recommend this company, The process of ordering was so easy. It is not disappointed me.
Turok
Ecuador
For my new deployment, performs very good.
Donald Boone
Uganda
Personally, the best seller I have ever dealt. Nice quality, really excellent delivery timing.
Maxwell
United Kingdom (UK)
first time use this new OLT model,more powerful than MA5680T, thanks for recommendation.
Leonard Knox
Liechtenstein
thunder-link.com has a very professional techinal team, they give us a good solution to meet our customer’s requirement, I like to cooperate with them. Good guys!
Antonio Santos
Ethiopia
Their technical team assist us to configure when we received the equipment, it’s perfect, they are very professional.
Macelo
South Africa
What a heavy chassis, just fit my 19” rack.