S2309TP-EI-DC

Huawei S2309TP-EI-DC switch with 8-ports 100BASE-T, 1-port GE SFP combo, 1 DC power fixed

(1 customer review) | 7 QA

0 in stock      Ready to ship

10 People watching this product now!
PN: 02351371 Categories: , Tag:
Authorized Partner

Authorized Partner x

Authorized Partner guaranteed or sourced from officially recognized partner. Chassis and modules come with 1 year warranty.

Original New Sealed

Original New Sealed x

Original, new and sealed switch; original packaging with seal; won't unpack the product without permission (insert the power module or replace the power supply cable).

Optical Module quality control-Test Procedure
In order to ensure that the optical module we deliver do not have compatibility problems. We will test each batch of optical modules, to avoid compatibility problems of switch to the greatest extent.
Learn More

Description

Huawei S2309TP-EI-DC switch with 8-ports 100BASE-T, 1-port GE SFP combo

With 1 DC power fixed

No extension slots

Layer 2 Ethernet switch

Forwarding perfomance: 2.68Mpps

Switching capacity: 3.6Gbps

Supports 8K MAC address entries

Non-POE switch

 

Huawei Quidway S2300 series switches are intelligent access switches for telecom customers. The S2300 is mainly deployed on the intranets and IP Metropolitan Area Network, carrying various Ethernet services. Huawei S2300 supports powerful lightning protection, ACLs, QinQ, 1:1 VLAN switching and N:1 VLAN switching etc.

Tech Specs
Item Description
Fixed port 8*10/100Base-TX ports, 1*10/100/1000Base-T or 100/1000Base-X port
Processor Dominant frequency: 200 MHz
Switching capacity 3.6 Gbit/s
Forwarding performance 2.68 Mpps
DDR memory 64 MB
Flash Memory 16 MB
Port switching capacity 3.6 Gbit/s
Backplane switching capacity 32 Gbit/s
MAC address table Supports 8K MAC address entries.
Supports manual addition and deletion of a MAC address table.
Supports configuration of MAC address aging time.
Supports disabling of MAC address learning based on port or aggregation group.
Supports limit on the number of MAC addresses to be learned on a port.
Supports blackhole MAC addresses.
VLAN features Supports IEEE 802.1Q (VLAN) and 4096 VLANs.
Supports port-based VLAN.
Supports MAC-based VLAN.
Supports basic QinQ.
Supports 1:1 VLAN switching.
Supports N:1 VLAN switching.
QoS Supports port rate limit and traffic rate limit.
Supports four queues with different priorities on each port.
Supports mapping of packets to different queues based on 802.1p.
Supports multiple algorithms including SP, WRR, and SP+WRR.
Supports traffic classification based on source MAC address, destination MAC address, source IP address, destination IP address, Layer-4 port number,protocol type, VLAN ID, Ethernet frame protocol type, and CoS.protocol type, and CoS.
Supports traffic-based priority marking and packet redirection.
IPv6 features Supports IPv6 host functions.
Supports static route configuration.
Supports IPv6 ACL.
Supports MLD v1/v2 snooping
Multicast Supports IGMP v1/v2/v3 snooping.
Supports multicast load sharing among bundled ports.
Supports port-based multicast rate limit and traffic statistics.
Port mirroring Supports 1:1 or N:1 port mirroring.
Supports Remote Switched Port
Analyzer (RSPAN) and traffic-based mirroring.
Supports packet forwarding on an observing port.
Security Supports IEEE 802.1X authentication and the limit on the maximum number of users on a port.
Supports dynamic ARP detection.
Supports IP Source Guard.
Supports multiple authentication methods including AAA, RADIUS, HWTACACS+, and NAC.
Supports binding of the IP address,MAC address, port number, and VLAN ID.
Support port rate limit.
Supports port isolation, port security, and sticky MAC.
Supports packet filtering.
Supports packet filtering based on MAC addresses.
Supports suppression of multicast, broadcast, and unknown single-cast packets.
Supports limit on the number of MAC addresses to be learned.
Supports CPU protection.
Surge protection Each port has a surge protection capability of 6 KV. Each port has a surge
protection capability of 15 KV after an extra surge protection device is added.
Management and maintenance Supports iStack
Supports automatic configuration.
Supports CLI configuration.
Supports remote configuration and maintenance by using Telnet.
Supports SNMP v1/v2/v3.
Supports RMON.
Supports HGMP v2.
Supports SSH v2.
Supports Web management.
Supports GVRP.
Operating environment Operating temperature: 0°C to 50°C (long term); –5°C to 55°C (short term);
relative humidity: 10% to 90% (non-condensing)
Power supply AC:
Rated voltage: 100 V to 240 V, 50/60 Hz
Maximum voltage: 90 V to 264 V, 50/60 Hz
Dimensions (mm) 250 (W) x 180 (D)x 43.6 (H)
Weight < 1.4 kg
Power consumption < 12.8 W

 

Additional information
Weight 3.5 kg
Dimensions 33.5 × 35.0 × 9.0 cm
PoE Type

Non-PoE

Features

,

Port

1-10

Rate

GE

Q&A

Q: What is the difference between Huawei 2700 switch and 2300 switch?

A: Huawei S2700 target the enterprise market, S2300 target at telecom market, but most function are the same, the manufacturer did this mostly for marketing reasons as the telecom market most are big customers with better discount.

 

Q: Can I get technical support from Thunder-link.com if we purchase LS-S2309TP-EI-DC from you?

A: Yes, Thunder-link.com has experienced technical team on Huawei switches, however, you may need to purchase technical support service from us as by default we only provide one year hardware warranty.

 

Q: Why failure to create VLANIF interfaces of other VLANs?

A:

This problem is caused by the VLANIF interface corresponding to the default VLAN (VLAN 1) of the system. Therefore, you must delete the VLANIF interface of VLAN 1 before configuring VLANIF interfaces of other VLANs.
[S2300]undo interface Vlanif 1
[S2300]interface Vlanif 3
[S2300]ip address 1.1.1.1 255.255.255.252

The configuration succeeds.

 

Q: Does the S2300 switch support PoE?

A:

In V100R001 and V100R002, none of the Switches support the PoE function.

In V100R003C00 and later versions, the following models of the Switch support the PoE function:

 

Q: How to delete all configurations of the S2300?

A:

To delete all the configurations, delete the vrpcfg.cfg file from the flash memory, and then restart the S2300. The vrpcfg.cfg file cannot be deleted when it is running because it is used as the system file. To delete the file forcibly, perform the following steps:

1.     Restart the S2300 and press Ctrl+B to enter the BootROM menu, and then enter the default password huawei.

2.     Press Ctrl+Z to enter the hidden menu, and then select option 2 to enter flash memory.

3.     Delete the vrpcfg.cfg file from the flash memory, and then restart the device.

 

Q: Does the S2300 support stacking?

A:

The S2300 does not support stacking. Later versions of V100R003 support the HGMP cluster.

 

Q: How to configure load balancing in a link aggregation group of SW2300?

A:

·         V100R001

Run the load-balance { dmac | smac | smacxordmac } command in the Eth-Trunk view.

The default load balancing mode is smacxordmac.

·         V100R002 and V100R003

Run the load-balance { dmac | smac | smacxordmac | sip | dip | sipxordip } command in the Eth-Trunk view.

The default load balancing mode is smacxordmac.

·         V100R005 and V100R006

Run the load-balance { dst-ip | dst-mac | src-ip | src-mac | src-dst-ip | src-dst-mac } command in the Eth-Trunk view.

The default load balancing mode of the S3300HI, S5300HI, S5306, and S6300 is src-dst-ip; the default load balancing mode of other switches is src-dst-mac.

Reviews (1)

1 review for S2309TP-EI-DC

  1. Wayne Johnson
    Maldives

    Price of this switch is often less than other companies.

Add a review

Your email address will not be published. Required fields are marked *

You have to be logged in to be able to add photos to your review.

Why Thunder-link.com

10 Years Experience

As a global leading professional Huawei network hardware and solution provider, we have delivered Huawei, ZTE, Nokia, CISCO, Fiberhome, etc, equipment to 500+ customer groups in 90+ countries over the past 10 years. Know more

Premium Quality Guaranteed

Strict 3-Level Quality Control procedure: 1st-Level inspection; 2nd-Level In-stock test; 3rd-Level 24 hour pre-delivery test to guarantee premium quality. Know more

Value over price

What we offer to our customers is value rather than price. We make customers enjoy the benefit of our reliable delivery products and generate more value to the greatest extent. Know more

Tailored Technical Support

We provide customers personalized and professional tech support by remote diagnosis, fault-location and troubleshooting. "We are here to help you instantly when you need it."

Flexible Payment

We continuously offer flexible payment methods such as Wire Transfer, Paypal, L/C, Western Union and Alipay, to help customer enjoy a more convenient shopping experience. Know more

Official Document Resource

We provide official and extensive document resources to guide our customers to targetly solve the problem they may meet. Know more

1 Year Warranty Guaranteed

Our products come with 1 year warranty. Customers can ask for a repair, replacement or refund for a major product failure. Know more

Fast Global Shipping

We won't stop to develop rapid and cost effective shipping options, provide the excellent experience for our global customers. Know more

One Stop Solution

We provide not only network products but also network proposal, mainstream and cost efficient solution to assist customers eliminate the concerns.