![Icon [all products]](https://www.thunder-link.com/tl-content/uploads/2022/05/Icon-all-products-1.svg "Icon [all products]"){kind=icon}
All products
in stock 3-5 days lead time
S2309TP-PWR-EI
Huawei S2309TP-PWR-EI switch with 8-ports 100BASE-T, 1-port GE SFP combo, 1 AC power fixed
11
People watching this product now!
Authorized Partner
Authorized Partner x
Authorized Partner guaranteed or sourced from officially recognized partner. Chassis and modules come with 1 year warranty.
Original New Sealed
Original New Sealed x
Original, new and sealed switch; original packaging with seal; won't unpack the product without permission (insert the power module or replace the power supply cable).
Optical Module quality control-Test Procedure
In order to ensure that the optical module we deliver do not have compatibility problems. We will test each batch of optical modules, to avoid compatibility problems of switch to the greatest extent.Description
Huawei S2309TP-PWR-EI switch with 8-ports 100BASE-T, 1-ports GE SFP combo
With 1 AC power fixed
No extension slots
Layer 2 Ethernet switch
Forwarding perfomance: 2.7Mpps
Switching capacity: 3.6Gbps
8K MAC address entries
POE switch
Huawei Quidway S2300 series switches are intelligent access switches for telecom customers. The S2300 is mainly deployed on the intranets and IP Metropolitan Area Network, carrying various Ethernet services. Huawei S2300 supports powerful lightning protection, ACLs, QinQ, 1:1 VLAN switching and N:1 VLAN switching etc.
Tech Specs
| Item | Description |
| Fixed port | 8*10/100Base-TX ports, 1*10/100/1000Base-T or 100/1000Base-X port |
| Processor | Dominant frequency: 200 MHz |
| Switching capacity | 3.6 Gbit/s |
| Forwarding performance | 2.7 Mpps |
| DDR memory | 64 MB |
| Flash Memory | 16 MB |
| Backplane switching capacity | 32 Gbit/s |
| MAC address table | Supports 8K MAC address entries. |
| Supports manual addition and deletion of a MAC address table. | |
| Supports configuration of MAC address aging time. | |
| Supports disabling of MAC address learning based on port or aggregation group. | |
| Supports limit on the number of MAC addresses to be learned on a port. | |
| Supports blackhole MAC addresses. | |
| VLAN features | Supports IEEE 802.1Q (VLAN) and 4096 VLANs. |
| Supports port-based VLAN. | |
| Supports MAC-based VLAN. | |
| Supports basic QinQ. | |
| Supports 1:1 VLAN switching. | |
| Supports N:1 VLAN switching. | |
| QoS | Supports port rate limit and traffic rate limit. |
| Supports four queues with different priorities on each port. | |
| Supports mapping of packets to different queues based on 802.1p. | |
| Supports multiple algorithms including SP, WRR, and SP+WRR. | |
| Supports traffic classification based on source MAC address, destination MAC address, source IP address, destination IP address, Layer-4 port number,protocol type, VLAN ID, Ethernet frame protocol type, and CoS.protocol type, and CoS. | |
| Supports traffic-based priority marking and packet redirection. | |
| IPv6 features | Supports IPv6 host functions. |
| Supports static route configuration. | |
| Supports IPv6 ACL. | |
| Supports MLD v1/v2 snooping | |
| Multicast | Supports IGMP v1/v2/v3 snooping. |
| Supports multicast load sharing among bundled ports. | |
| Supports port-based multicast rate limit and traffic statistics. | |
| Port mirroring | Supports 1:1 or N:1 port mirroring. |
| Supports Remote Switched Port | |
| Analyzer (RSPAN) and traffic-based mirroring. | |
| Supports packet forwarding on an observing port. | |
| Security | Supports IEEE 802.1X authentication and the limit on the maximum number of users on a port. |
| Supports dynamic ARP detection. | |
| Supports IP Source Guard. | |
| Supports multiple authentication methods including AAA, RADIUS, HWTACACS+, and NAC. | |
| Supports binding of the IP address,MAC address, port number, and VLAN ID. | |
| Support port rate limit. | |
| Supports port isolation, port security, and sticky MAC. | |
| Supports packet filtering. | |
| Supports packet filtering based on MAC addresses. | |
| Supports suppression of multicast, broadcast, and unknown single-cast packets. | |
| Supports limit on the number of MAC addresses to be learned. | |
| Supports CPU protection. | |
| Surge protection | Each port has a surge protection capability of 6 KV. Each port has a surge protection capability of 15 KV after an extra surge protection device is added. |
| Management and maintenance | Supports iStack |
| Supports automatic configuration. | |
| Supports CLI configuration. | |
| Supports remote configuration and maintenance by using Telnet. | |
| Supports SNMP v1/v2/v3. | |
| Supports RMON. | |
| Supports HGMP v2. | |
| Supports SSH v2. | |
| Supports Web management. | |
| Supports GVRP. | |
| Operating environment | Operating temperature: 0°C to 50°C (long term); –5°C to 55°C (short term); relative humidity: 10% to 90% (non-condensing) |
| Power supply | AC: Rated voltage: 100 V to 240 V, 50/60 Hz Maximum voltage: 90 V to 264 V, 50/60 Hz |
| Dimensions (mm) | 320 (W) x 220 (D)x 43.6 (H) |
| Weight | < 2.4 kg |
| Power consumption | < 154 W, PoE power 124W |
Additional information
| Weight | 3.5 kg |
|---|---|
| Dimensions | 33.5 × 35.0 × 9.0 cm |
| PoE Type |
Non-PoE |
| Features | |
| Port |
1-10 |
| Rate |
GE |
Q&A
Q: Why failure to create VLANIF interfaces of other VLANs?
A:
This problem is caused by the VLANIF interface corresponding to the default VLAN (VLAN 1) of the system. Therefore, you must delete the VLANIF interface of VLAN 1 before configuring VLANIF interfaces of other VLANs.
[S2300]undo interface Vlanif 1
[S2300]interface Vlanif 3
[S2300]ip address 1.1.1.1 255.255.255.252
The configuration succeeds.
Q: Does the S2300 switch support PoE?
A:
In V100R001 and V100R002, none of the Switches support the PoE function.
In V100R003C00 and later versions, the following models of the Switch support the PoE function:
- S2326TP-PWR-EI
- S2309TP-PWR-EI
Q: How to delete all configurations of the S2300?
A:
To delete all the configurations, delete the vrpcfg.cfg file from the flash memory, and then restart the S2300. The vrpcfg.cfg file cannot be deleted when it is running because it is used as the system file. To delete the file forcibly, perform the following steps:
1. Restart the S2300 and press Ctrl+B to enter the BootROM menu, and then enter the default password huawei.
2. Press Ctrl+Z to enter the hidden menu, and then select option 2 to enter flash memory.
3. Delete the vrpcfg.cfg file from the flash memory, and then restart the device.
Q: Does the S2300 support stacking?
A:
The S2300 does not support stacking. Later versions of V100R003 support the HGMP cluster.
Q: How to configure load balancing in a link aggregation group of SW2300?
A:
· V100R001
Run the load-balance { dmac | smac | smacxordmac } command in the Eth-Trunk view.
The default load balancing mode is smacxordmac.
· V100R002 and V100R003
Run the load-balance { dmac | smac | smacxordmac | sip | dip | sipxordip } command in the Eth-Trunk view.
The default load balancing mode is smacxordmac.
· V100R005 and V100R006
Run the load-balance { dst-ip | dst-mac | src-ip | src-mac | src-dst-ip | src-dst-mac } command in the Eth-Trunk view.
The default load balancing mode of the S3300HI, S5300HI, S5306, and S6300 is src-dst-ip; the default load balancing mode of other switches is src-dst-mac.
Q: Does LS-S2309TP-PWR-EI support PoE+?
A: Yes, Each interface provides a maximum of 30 W power and supports a maximum of 100 m power supply distance.
Q: How much PoE power LS-S2309TP-PWR-EI can supply?
A: LS-S2309TP-PWR-EI has a built-in 180 W PoE power supply unit, and provides 124 W PoE power.
Q: Do you have Huawei X300 series switch in Thunder-link.com Lab for remote test?
A: Yes, you may contact Thunder-link.com sales person.
Q: Can I get technical support from Thunder-link.com if we purchase LS-S2309TP-PWR-EI from you?
A: Yes, Thunder-link.com has experienced technical team on Huawei switches, however, you may need to purchase technical support service from us as by default we only provide one year hardware warranty.
Reviews (0)
Why Thunder-link.com
Reviews
There are no reviews yet.