S2710-52P-SI-AC

Huawei S2710-52P-SI-AC switch with 48-ports 100BASE-T, 4-ports GE SFP, 1 AC power fixed

in stock      3-5 days lead time

19 People watching this product now!
PN: 02354128 Categories: , Tag:
Authorized Partner

Authorized Partner x

Authorized Partner guaranteed or sourced from officially recognized partner. Chassis and modules come with 1 year warranty.

Original New Sealed

Original New Sealed x

Original, new and sealed switch; original packaging with seal; won't unpack the product without permission (insert the power module or replace the power supply cable).

Optical Module quality control-Test Procedure
In order to ensure that the optical module we deliver do not have compatibility problems. We will test each batch of optical modules, to avoid compatibility problems of switch to the greatest extent.
Learn More

Description

Huawei S2710-52P-SI-AC switch, 48-ports 100BASE-T, 4-port GE SFP

With 1 AC power fixed

No extension slots

Layer 2 Ethernet switch

Forwarding perfomance: 13.2Mpps

Switching capacity: 64Gbps

8K MAC address entries

Non-POE

 

Huawei Quidway S2700 series switches are intelligent access switches for telecom customers. The S2700 is mainly deployed on the intranets and IP Metropolitan Area Network, carrying various Ethernet services. Huawei S2700 supports powerful surge protection, SEP, ERPS, ASIC switching etc.

Tech Specs
Item Description
Fixed port 48 Ethernet 10/100 ports, 4 Gig SFP
Forwarding performance 13.2 Mpps
MAC address table Supports 8K MAC address entries.
Supports manual deletion of dynamic MAC address entries
Supports configuration of MAC address aging time.
Supports disabling of MAC address learning based on port or aggregation group.
Supports blackhole MAC addresses.
VLAN features Supports IEEE 802.1Q
Supports 4K active VLANs.
Supports Port-based VLAN assignment.
QoS Supports Outbound-Port-based rate limiting and flowbased rate limiting
Supports four or eight queues with different priorities on each port.
Supports mapping Mapping between 802.1p priorities and queues
Supports multiple algorithms including SP, WRR, and SP+WRR.
IPv6 features Supports IPv6 protocol.
Supports Static IPv6 routes.
Multicast Supports IGMP v1/v2/v3 snooping.
Supports Port-based rate limiting for multicast packets
Reliability Supports STP (IEEE802.1d), RSTP (IEEE802.1w)
Security& access features Supports multiple authentication methods including AAA, RADIUS, and TACACS+
Supports port isolation.
Supports suppression of multicast, broadcast, and unknown unicast packets.
Supports CPU defense.
Surge protection Surge protection capability of service ports: 6 kV (The surge protection capability of service ports on   PoE switches is 1 kV.)
Management and maintenance Supports automatic configuration.
Supports CLI configuration.
Supports remote configuration and maintenance by using Telnet.
Supports SNMP v1/v2/v3.
Supports SSHv2.
Supports Web management.
Operating environment Long-term operating temperature: –5oC to + 50oC

Relative humidity: 10% to 90% (non-condensing)

Power supply AC:
Rated voltage: 100 V to 240 V, 50/60 Hz
Maximum voltage: 90 V to 264 V, 50/60 Hz
Dimensions (mm) 442 (W) x 220 (D)x 43.6 (H)
Weight < 3 kg
Power consumption < 38 W

 

 

Additional information
Weight 4.0 kg
Dimensions 55.5 × 37.5 × 9.0 cm
PoE Type

Non-PoE

Features

,

Port

48+

Rate

GE

Q&A

Q: What is the difference between Huawei 2700 switch and 2300 switch?

A: Huawei S2700 target the enterprise market, S2300 target at telecom market, but most function are the same, the manufacturer did this mostly for marketing reasons as the telecom market most are big customers with better discount.

 

Q: Can I get technical support from Thunder-link.com if we purchase LS-S2710-52P-SI-AC from you?

A: Yes, Thunder-link.com has experienced technical team on Huawei switches, however, you may need to purchase technical support service from us as by default we only provide one year hardware warranty. And you also can purchase technical support from Thunder-link.com.

 

Q: What is the difference between Huawei 2700 switch and 2300 switch?

A: Huawei S2700 target the enterprise market, S2300 target at telecom market, but most function are the same, the manufacturer did this mostly for marketing reasons as the telecom market most are big customers with better discount.

 

Q: Can I get technical support from Thunder-link.com if we purchase LS-S2700-18TP-SI-AC from you?

A: Yes, Thunder-link.com has experienced technical team on Huawei switches, however, you may need to purchase technical support service from us as by default we only provide one year hardware warranty. And you also can purchase technical support from Thunder-link.com.

 

Q: What are the power supply types supported by the S2700SI/EI?

A:  The S2700SI, S2710SI,and S2750EI support only AC power supply. The S2700EI supports both AC power supply and DC power supply.

 

Q: Why the S2700 switch cannot transparently transmit the packets whose VLANID is greater than 127 after VLAN translation is enabled?

A:  After the VLAN translation function is enabled for the S2700 switch, the 128 module problem exists because the chip difference supports only 128 VLAN TO VLAN entries.

The packets received through the port are processed as the VLAN smaller than 128. The calculation method is (vlanid)%128.

Therefore, for a VLAN greater than 128, port vlan-mapping vlan id map-vlan id, that is, the mapping from the VLAN to the same VLAN, must be configured for the transparent transmission to be implemented.

 

Q: How many member switches does the HGMP feature of the S2700 switch support in a cluster?

A: The HGMP feature of the S2700 supports a maximum of 32 member switches in a cluster.

Switches running V100R006C05, V200R002, or a later version do not support HGMP.

 

Q: Outbound flow mirroring fails to be configured on the S2700. does the system displays an error message and is the configuration file available?

A:  When outbound flow mirroring fails to be configured, there may be no error message or the configuration file is unavailable. Before configuring outbound flow mirroring, configure two reserved interfaces. The reserved interface cannot belong to any VLAN. Therefore, you must delete an interface from VLANs before configuring it as the reserved interface.

 

Q: After a Non-configured S2700 connects to the internet, the CPU usage is high, why?

A: By default, the S2700 sends IPv6 ND packets to the CPU. Because WIN7 clients are used, so many ND packets may exist, which cause high CPU usage. This problem exists in V100R005. You can load the latest patch or upgrade the switch to V100R006.

 

Q: DHCP users go online through the S2700, but cannot access the internet. Why?

A:  When a large number of DHCP users go online through the S2700, the S2700 generates a large number of dynamic DHCP snooping binding entries. On the S2700 V1R6C00SPC800, the software provides incorrect priority settings for DHCP snooping binding entries and IP source guard and DAI ACL rules, and the ACL rules have a higher priority than DHCP snooping binding entries. As a result, the software delivers the ACL rules but not DHCP snooping binding entries. User packets cannot be forwarded because no binding entry is available.

Solution: Install S2700SPH006, enable DHCP users to go online again, and reconfigure IP source guard and DAI on the physical interface from which DHCP users go online.

 

Q: Can the S2700 switch function as a gateway?

A: The S2700 switch cannot be used as a gateway. The S2700 is a Layer 2 switch. If it is used as a gateway, it sends all packets that need to be forwarded at Layer 3 to the CPU to forward the packets through software. This causes a high CPU usage. Because CAR parameters are configured to protect the CPU, a large number of packets are dropped, affecting forwarding of service packets.

 

Q: Can loopback detection on the S2700 detect loops between more than two ports?

A:  Loopback detection on the S2700 cannot detect loops between more than two ports. Loopback detection is a single-node technique, and detects loops on the network connected to an interface by checking whether packets sent out from the interface are sent back to the interface.

Reviews (0)

Reviews

There are no reviews yet.

Be the first to review “S2710-52P-SI-AC”

Your email address will not be published. Required fields are marked *

You have to be logged in to be able to add photos to your review.

Why Thunder-link.com

10 Years Experience

As a global leading professional Huawei network hardware and solution provider, we have delivered Huawei, ZTE, Nokia, CISCO, Fiberhome, etc, equipment to 500+ customer groups in 90+ countries over the past 10 years. Know more

Premium Quality Guaranteed

Strict 3-Level Quality Control procedure: 1st-Level inspection; 2nd-Level In-stock test; 3rd-Level 24 hour pre-delivery test to guarantee premium quality. Know more

Value over price

What we offer to our customers is value rather than price. We make customers enjoy the benefit of our reliable delivery products and generate more value to the greatest extent. Know more

Tailored Technical Support

We provide customers personalized and professional tech support by remote diagnosis, fault-location and troubleshooting. "We are here to help you instantly when you need it."

Flexible Payment

We continuously offer flexible payment methods such as Wire Transfer, Paypal, L/C, Western Union and Alipay, to help customer enjoy a more convenient shopping experience. Know more

Official Document Resource

We provide official and extensive document resources to guide our customers to targetly solve the problem they may meet. Know more

1 Year Warranty Guaranteed

Our products come with 1 year warranty. Customers can ask for a repair, replacement or refund for a major product failure. Know more

Fast Global Shipping

We won't stop to develop rapid and cost effective shipping options, provide the excellent experience for our global customers. Know more

One Stop Solution

We provide not only network products but also network proposal, mainstream and cost efficient solution to assist customers eliminate the concerns.