Thunder-link.com, Link You to Premium Networks

Click to enlarge

Back to products

S5700-28C-PWR-SI

Name: Buy Huawei S5700-28C-PWR-SI switch online at thunder-link.com
SKU: 02354137

(0 reviews) | 15 QA

Huawei S5700-28C-PWR-SI switch with 24-ports 1000BASE-T, including 4-ports GE SFP combo, 2 power slots, 1 AC power module equipped, 2 extension slots

in stock 3-5 days lead time

PN: 02354137 Category: S5700 Switch Tag: 24 Port Switch

Authorized Partner

Authorized Partner x

Authorized Partner guaranteed or sourced from officially recognized partner. Chassis and modules come with 1 year warranty.

Original New Sealed

Original New Sealed x

Original, new and sealed switch; original packaging with seal; won't unpack the product without permission (insert the power module or replace the power supply cable).

Description

Huawei S5700-28C-PWR-SI switch, 24-ports 1000BASE-T, including 4-ports GE SFP combo

With 2 power slots, 1 AC power module included

With 2 extension slots

Layer 3 Ethernet switch

Forwarding perfomance: 96Mpps

Switching capacity:256Gbps

16K MAC address entries

POE switch

Huawei Quidway S5700 series gigabit enterprise switches is designed for high-bandwidth access and Ethernet aggregation. Huawei Quidway S5700 can be used in various campus network scenarios: access switch, aggregation switch, gigabit access switch in Internet data center, or desktop switch to provide 1000 Mbps access for terminals.

Tech Specs

Specification
Fixed port	Twenty 10/100/1000Base-T ports and four GE combo ports
Forwarding performance	96 Mpps
Extended slot	Provide two extended slots, one for an uplink subcard and the other for a stack card.
Switching Capacity	256Gbps
MAC address table	IEEE 802.1d compliance
	16K MAC address entries
	MAC address learning and aging
	Static, dynamic, and blackhole MAC address entries
	Packet filtering based on source MAC addresses
VLAN	4K VLANs
	Guest VLAN and voice VLAN
	VLAN assignment based on MAC addresses, protocols, IP subnets, policies, and ports
	1:1 and N:1 VLAN Mapping
	SuperVLAN(supported by the S5700-SI/S5700-EI/S5700-HI series)
Reliability	RRPP ring topology and RRPP multi-instance
	Smart Link tree topology and Smart Link multi-instance, providing the millisecond-level protection switchover
	SEP
	ERPS(G.8032）(supported by the S5700-LI/S5700-SI/S5700-EI/S5700-HI series)
	STP, RSTP, and MSTP
	BPDU protection, root protection, and loop protection
	E-Trunk
IP routing	Static routing
IP routing	RIPv1, RIPv2 and RIPng,ECMP(supported by the S5700-SI/S5700-EI/S5700-HI series)
IPv6 features	Neighbor Discovery (ND)
	Path MTU (PMTU)
	IPv6 ping, IPv6 tracert, and IPv6 Telnet
	ACLs based on the source IPv6 address, destination IPv6 address, Layer 4 ports, or protocol type
	MLD v1/v2 snooping
	6to4 tunnel, ISATAP tunnel, and manually configured tunnel
Multicast	IGMP v1/v2/v3 snooping and IGMP fast leave
	Multicast forwarding in a VLAN and multicast replication between VLANs
	Multicast load balancing among member ports of a trunk
	Controllable multicast
	Port-based multicast traffic statistics
QoS/ACL	Rate limiting on packets sent and received by an interface
	Packet redirection
	Port-based traffic policing and two-rate three-color CAR
	Eight queues on each port
	WRR, DRR, SP, WRR+SP, and DRR+SP queue scheduling algorithms
	Re-marking of the 802.1p priority and DSCP priority
	Packet filtering at Layers 2 through 4, filtering out invalid frames based on the source MAC address, destination MAC address, source IP address, destination IP address, port number, protocol type, and VLAN ID
	Rate limiting in each queue and traffic shaping on ports
Security	User privilege management and password protection
	DoS attack defense, ARP attack defense, and ICMP attack defense
	Binding of the IP address, MAC address, interface, and VLAN
	Port isolation, port security, and sticky MAC
	Blackhole MAC address entries
	Limit on the number of learned MAC addresses
	802.1x authentication and limit on the number of users on an interface
	AAA authentication, RADIUS authentication, HWTACACS authentication, and NAC
	SSH v2.0
	Hypertext Transfer Protocol Secure (HTTPS)
	CPU defense
	Blacklist and whitelist
OAM	Supports
Access Security	DHCP Relay, DHCP Server, DHCP Snooping, DHCP Security
Management and maintenance	Virtual cable test
	Stacking
	MAC Forced Forwarding (MFF)
	Port mirroring and RSPAN (remote port mirroring)
	Remote configuration and maintenance using Telnet
	SNMP v1/v2/v3
	RMON
	Web NMS
	HGMP
	System logs and alarms of different levels
	802.3az EEE (supported by the S5700(S)-LI, S5710-EI, S5700-HI and S5710-HI)
	GVRP
	MUX VLAN
DDR memory	256 MB
Flash memory	32 MB
Mean time between failures (MTBF)	S5700-28C-PWR-SI: 53.6 years when a 2x10GE card is configured; 74.6 years when a 4xGE front card is configured; 25.68 years when a 4x10GE front card is configured
Mean time to repair (MTTR)	2 hours
Availability	> 0.99999
Surge protection: Service port protection	PoE switch: ±1 kV in common mode
Surge protection: Power supply protection	PoE switch: ±2 kV in differential mode; ±4 kV in common mode
Stack port	Two stack ports available on each stack card
Maximum stack bandwidth (bidirectional)	48 Gbit/s
RPS	Not supported
PoE	The PWR series support PoE.
Input DC voltage: Rated input voltage range	-48 V DC to -60 V DC
Input DC voltage: Maximum voltage range	-36 V DC to -72 V DC
Input AC voltage: Rated input voltage range	100 V AC to 240 V AC, 50/60 Hz
Input AC voltage: Maximum voltage range	90 V AC to 264 V AC, 47 Hz to 63 Hz
Maximum system power consumption (100% throughput, 100% PoE loads, full speed of fans)	S5700-28C-PWR-SI: 836 W (system power consumption: 96 W; PoE: 740 W)
Operating temperature	0°C to 50°C
Storage temperature	-40°C to +70°C
Noise under normal temperature (27°C, sound power)	S5700-28C-PWR-SI: less than 45 dBA
Relative humidity	5% RH to 95% RH, noncondensing
Operating altitude	PoE switch: 0 m to 5000 m
EMC	CISPR22 Class A
	CISPR24
	EN55022 Class A
	EN50024
	ETSI EN 300 386 Class A
	CFR 47 FCC Part 15 Class A
	ICES 003 Class A
	AS/NZS CISPR22 Class A
	IEC61000-4-2
	ITU-T K 20
	ITU-T K 44
Environmental standards	RoHS
	REACH
	WEEE
Security	IEC 60950-1
	EN 60950-1/A11/A12
	UL 60950-1
	CSA C22.2 No 60950-1
	AS/NZS 60950.1
Laser safety	IEC60825-1
	IEC60825-2
	EN60825-1
	EN60825-2
Dimensions (W x D x H)	442.0 mm x 420.0 mm x 43.6 mm
Fully loaded	≤ 8.5 kg
Empty loaded	≤ 5 kg

Additional information

Weight	4.0 kg
Dimensions	55.5 × 37.5 × 9.0 cm
PoE Type	Non-PoE
Features	Authorized Partner, Original New Sealed
Port	12-24
Rate	GE

Q&A

Q: What is the difference between S5700-28C-PWR-SI and S5700-28C-PWR-EI?

A:Basically there are three big difference:

1.S5700-28C-PWR-EI is 24 10/100/1000Base-T while S5700-28C-PWR-SI is 20 10/100/1000Base-T and 4 GE Combo.

2.S5700-28C-PWR-EI is coming without power supply while S5700-28C-PWR-SI includes single 500W AC power.

3.Their software is different, for difference of 5700 EI and SI refer below:

Features	S5700-28C-PWR-SI	S5700-28C-PWR-EI
IPv4 Routing Protocol	Static route/RIP	Static route/RIP/OSPF/BGP/ISIS
IPv6 Routing Protocol	Static route/RIPng	Static route/RIPng/OSPFv3/BGP4+/ISIS for IPv6
Multicast	IGMP Snooping/MLD Snooping	IGMP Snooping/MLD Snooping/IGMP/MLD/MSDP/PIM(IPv4)/PIM(IPv6)
Traffic analysis	Not supported	sFlow
MAC address entries	16K	32K
BFD	Not Support	BFD for OSPF, BFD for IS-IS, BFD for VRRP, and BFD for PIM
MAC address entries	16K	32K

Q: Do I need to buy power supply for S5700-28C-PWR-SI?

A:By default a 500W AC power supply already included in S5700-28C-PWR-SI switch, it can work, however if you want to get redundant power supply, you may add another 500W power supply, two power supply will not help increase output PoE Power, it is the same 369.6 W PoE Power.

Q: Does S5700-28C-PWR-SI support DC?

A: No, Huawei POE switch only support AC Power supply.

Q: Does S5700-28C-PWR-SI support 802.3at PoE+?

A:Yes, it supports 802.3af and 802.3at.

Q: What is the available PoE power configured with different power supplies?

Power Supply 1	Power Supply 2	Available PoE Power	Switch	PoE Ports(Fully Usage)
250W	–	123.2W	S5700-28C-PWR-SI	802.3af(15.4W/Port): 8 802.3at(30W/Port): 4
500W	–	369.6W	S5700-28C-PWR-SI	802.3af(15.4W/Port): 24 802.3at(30W/Port): 12
250W	250W	246.4W	S5700-28C-PWR-SI	802.3af(15.4W/Port): 16 802.3at(30W/Port): 8
500W	500W	369.6W	S5700-28C-PWR-SI	802.3af(15.4W/Port): 24 802.3at(30W/Port): 12

Q: Does S5700-28C-PWR-SI support dual power?

A: Yes,The PoE switch provides two power module slots, each supporting a 500 W or 250 W power module. A single power module provides 369.6 W or 123.2 W PoE power for PDs.

Q: Does S5700-28C-PWR-SI support stack?

A: Yes, you just need to purchase the stack card.

Q: Do I need to buy SFP Modules for S5700-28C-PWR-SI?

A:Yes. if optical ports to be put into use..

Q: How many slots S5700-28C-PWR-SI support?

A: Provide two extended slots, one for an uplink subcard and the other for a stack card.

Q: Which subcard does S5700-28C-PWR-SI support?

A: It supports below 3 subcards:

ES5D000X2S00, 2 10 Gig SFP+ interface card

ES5D000X4S00, 4 10 Gig SFP+ optical interface card(including 4 10 Gig SFP+ interface card and extend channel card)

ES5D00G4SA00, 4 Gig SFP interface card(including 4 Gig SFP optical interface card and extend channel card)

Q: Can I use 4 port subcards on S5700-28C-PWR-SI together with stack card?

A:Yes, but in that case on 4 port subcard only 2 ports can be used, you can use all the 4 ports when no stack card.

Q: Can Thunder-link.com provide MIB for Huawei S5700 switch?

A: Yes, you may contact our sales person

Q: Can I use compatible SFP/SFP+ module on Huawei S5700 switch?

A:Yes, but the switch may generate alarm, however, it will not affect normal use

Q: What is the difference between Huawei 5700 switch and 5300 switch?

A:Huawei S5700 target the enterprise market, S5300 target at telecom market, but most function are the same, the manufacturer did this mostly for marketing reasons as the telecom market most are big customers with better discount.

Q: Can I get technical support from Thunder-link.com if we purchase S5700-28C-PWR-SI from you?

A: Yes, Thunder-link.com has experienced technical team on Huawei switches, however, you may need to purchase technical support service from us as by default we only provide one year hardware warranty.

Reviews (0)

Reviews

There are no reviews yet.

Be the first to review “S5700-28C-PWR-SI”

Your email address will not be published. Required fields are marked *

Your rating *

Your review *

Your Country *

Name *

Solve Captcha* Star

You have to be logged in to be able to add photos to your review.

Why Thunder-link.com

15 Years Experience

As a global leading professional Huawei network hardware and solution provider, we have delivered Huawei, ZTE, Nokia, CISCO, Fiberhome, etc, equipment to 500+ customer groups in 90+ countries over the past 15 years. Know more

Premium Quality Guaranteed

Strict 3-Level Quality Control procedure: 1st-Level inspection; 2nd-Level In-stock test; 3rd-Level 24-hour pre-delivery test to guarantee premium quality. Know more

Value over price

What we offer to our customers is value rather than price. We enable customers to enjoy the benefit of our reliable delivery products and generate more value to the greatest extent. Know more

Tailored Technical Support

We provide customers with personalized and professional tech support by remote diagnosis, fault-location and troubleshooting. "We are here to help you instantly when you need it."

Flexible Payment

We continuously offer flexible payment methods such as Wire Transfer, Paypal, L/C, Western Union and Alipay, to help customer enjoy a more convenient shopping experience. Know more