库存 件 3-5 days lead time
Huawei S6720-32C-SI-DC switch with 24-ports 100M/1G/2.5G/5G/10G BASE-T, 4x10GE SFP+, 2 power slots, 1 DC power module equipped
Huawei S6720-32C-SI-DC switch with 24-port 100M/1G/2.5G/5G/10G BASE-T, 4-port 10GE SFP+
With 2 power slots, 1 DC power module included
Forwarding performance: 240Mpps
Switching capacity: 2.56/23.04Tbps
32K MAC address entries
Applicable power modules:
ES0W2PSA0150 (150 W AC Power Module)
ES0W2PSD0150 (150 W DC Power Module)
One extension slot, cards supported:
NOTE: The four 10GE SFP+ ports on the front panel cannot be used simultaneously with ports on the rear card (except the 4-port 10GE rear card).
Huawei S6720-SI series switches are Huawei-developed next-generation multigigabit 10GE fixed switches. S6720-SI can provide high-speed wireless access, and access for 10GE servers in data centers or function as access/aggregation switches on a campus network. S6720-SI provides a wide variety of services, comprehensive security policies, and various QoS features to help customers build scalable, manageable, reliable, and secure campus and data center networks.
Table 1 S6720-32C-SI-DC Similar Ports Switches Comparison
|Model||Fixed Ports||Switching Capacity||Forwarding Capacity|
|S6720-26Q-SI-24S-AC||24-port 10GE SFP+,2-port 40GE QSFP+||2.56 Tbit/s||240 mpps|
|S6720S-26Q-SI-24S-AC||24-port 10GE SFP+,2-port 40GE QSFP+||2.56 Tbit/s||240 mpps|
|S6720S-26Q-EI-24S-AC||24-port 10GE SFP+, 2-port 40GE QSFP+||2.56 Tbit/s||480 Mpps|
|24-port 10GE SFP+,2-port 40GE QSFP+||2.56 Tbit/s||720 Mpps|
|S6720-32X-SI-32S-AC||32-port 10GE SFP+||2.56 Tbit/s||240 mpps|
|24-port multi-gigabit Base-T, 4-port 10GE SFP+||2.56 Tbit/s||240 mpps|
|24-port multi-gigabit Base-T,4-port 10GE SFP+||2.56 Tbit/s||240 mpps|
Table 2 S6720-32C-SI-DC applicable modules and cables recommended for you
|GE SFP Copper Modules
|SFP-1000BaseT||Electrical Transceiver,SFP,GE,1000BASE-T RJ45 0.1km|
|GE eSFP Optical Modules|
|eSFP-GE-SX-MM850||Optical Transceiver,GE, eSFP 1000BASE-SX MMF 0.1km 850nm LC|
|OGSC10DD0/SFP-GE-LX-SM1310||Optical Transceiver,GE, eSFP1000BASE-LX10/LH SMF 10km 1310nm LC|
|OGSC40DD0/SFP-GE-EX-C||Optical Transceiver,GE, eSFP 1000BASE-EX SMF 40km 1310nm LC|
|S-SFP-GE-LH40-SM1550||Optical Transceiver,GE, eSFP SMF 40km 1550nm LC|
|10GE SFP+ Optical Modules (OSXD22N00 not supported)|
|SFP-10G-SR/SFP-10G-SR-C||Optical Transceiver,SFP+,10GBASE-SR MMF 0.3km 850nm LC|
|OSX010000||Optical Transceiver,SFP+,10G SMF 10km 1310nm LC|
|OSX040N01||Optical Transceiver,SFP+,10GBASE-ER SMF 40km 1550nm LC|
|SFP-10G-CU1M||1m 10G SFP+ high-speed copper cable|
|SFP-10G-CU3M||3m 10G SFP+ high-speed copper cable|
|SFP-10G-CU5M||5m 10G SFP+ high-speed copper cable|
|SFP-10G-AC10M||10m 10G SFP+ high-speed copper cable|
|SFP-10G-AOC3M||3m 10G SFP+ AOC cable|
|SFP-10G-AOC10M||10m 10G SFP+ AOC cable|
|Fixed Ports||S6720-32C-SI-DC with 24 x multi-gigabit Base-T Ethernet ports, 4 x 10 GE SFP+|
|Memory (RAM)||1 GB|
|Flash||512 MB in total. To view the available flash memory size, run the display version command.|
|Mean time between failures (MTBF)||27.4 years|
|Mean time to repair (MTTR)||2 hours|
|Service port surge protection||Common mode: ±7 kV|
|Power supply surge protection||Using AC power modules: ±6 kV in differential mode, ±6 kV in common mode|
|Using DC power modules: ±1 kV in differential mode, ±2 kV in common mode|
|Dimensions (H x W x D)||Basic dimensions (excluding the parts protruding from the body):
44.4 mm x 442.0 mm x 425.0 mm
|Maximum dimensions (the depth is the distance from ports on the front panel
to the handle on the rear panel): 44.4 mm x 442.0 mm x 451.3 mm
|Weight (including package)||8.7 kg (19.18 lb)|
|Stack ports||Any MultiGE, 10GE SFP+, or 40GE QSFP+ ports (a maximum of 16 physical ports)|
|Rated voltage range||100 V AC to 240 V AC, 50/60 Hz|
|-48 V DC to -60 V DC|
|Maximum voltage range||90 V AC to 264 V AC, 47 Hz to 63 Hz|
|-36 V DC to -72 V DC|
|Maximum power consumption (100% throughput, full speed of fans)||117.62 W (without card)|
|Typical power consumption (30% of traffic load, tested according to ATIS standard)||93 W (without card)|
|Operating temperature||0°C to 45°C (32°F to 113°F) at an altitude of 0-1800 m (0-5906 ft.)|
|Short-term operating temperature||-5°C to +50°C (23°F to 122°F) at an altitude of 0-1800 m (0-5906 ft.)|
|Storage temperature||’-40°C to +70°C (-40°F to +158°F)|
|Noise under normal temperature (27째C, sound power)||< 62.3 dB(A)|
|Relative humidity||5% to 95%, noncondensing|
|Operating altitude||AC power modules configured: 0-5000 m (0-16404 ft.)|
|DC power modules configured: 0-2000 m (0-6562 ft.)|
|尺寸||71.0 × 17.0 × 55.0 cm|
Q: Do I need to buy power supply for S6720-32C-SI-DC?
A: S6720-32C-SI-DC supports double pluggable power supplies, by default, it configures with 1 power. If you need power redundancy, you need purchase additionally.
Q: How many slots does S6720-32C-SI-DC support?
A: One extended slot.
Q: What is the differece between S6720-32C-SI-DC and S6720-32C-PWH-SI?
A: S6720-32C-PWH-SI can support Long distance PoE++, while S6720-32C-SI-DC cannot.
Q: Can I use compatible SFP/SFP+ module on Huawei S6720 switch?
A:Yes, but the switch may generate alarm, however, it will not affect normal use
Q: Can I get technical support from Thunder-link.com if we purchase S6720-32C-SI-DC from you?
A: Yes, Thunder-link.com has experienced technical team on Huawei switches, however, you may need to purchase technical support service from us as by default we only provide one year hardware warranty.
Huawei S6720-32C-SI-DC switch with 24-ports 100M/1G/2.5G/5G/10G BASE-T, 4x10GE SFP+, 2 power slots, 1 DC power module equipped(3 条用户评价) | 0