![Icon [all products]](https://www.thunder-link.com/tl-content/uploads/2022/05/Icon-all-products-1.svg "Icon [all products]"){kind=icon}
All products
96 in stock Ready to ship
S6720-54C-EI-48S-DC
Huawei S6720-54C-EI-48S-AC switch with 48-ports 10GE SFP+, 2-ports 40GE QSFP+, 2 power slots, 1 DC power equipped, 1 extension slot
12
People watching this product now!
Authorized Partner
Authorized Partner x
Authorized Partner guaranteed or sourced from officially recognized partner. Chassis and modules come with 1 year warranty.
Original New Sealed
Original New Sealed x
Original, new and sealed switch; original packaging with seal; won't unpack the product without permission (insert the power module or replace the power supply cable).
Optical Module quality control-Test Procedure
In order to ensure that the optical module we deliver do not have compatibility problems. We will test each batch of optical modules, to avoid compatibility problems of switch to the greatest extent.Description
Huawei S6720-54C-EI-48S-DC switch with 48-ports 10GE SFP+, 2-ports 40GE QSFP+
With 2 power slots, 1 DC power module included
Applicable power modules:
PDC-350WA-B (350 W DC Power Module)
PAC-600WA-B (600 W AC Power Module)
PAC-600WD-B (600 W AC Power Module)
With 1 extension slot
Forwarding perfomance: 1080Mpps
Switching capacity: 2.56 Tbps
288K MAC address entries
Non-POE
Huawei S6720 series gigabit enterprise switches is designed for high-bandwidth access and Ethernet aggregation. Huawei Quidway S6720 can be used in various campus network scenarios: access switch, aggregation switch, gigabit access switch in Internet data center, or desktop switch to provide 1000 Mbps access for terminals.
S6720-54C-EI-48S and S6720-50L-HI-48S Comparison
Table 1 S6720-54C-EI-48S-DC Similar Ports Switches Comparison
| Model | Fixed Ports | Switching Capacity | Forwarding Capacity | RTU License |
| S6730-H48X6C | 48-port 10GE SFP+,6-port 40GE/100GE QSFP28 | 2.16Tbps/2.4Tbps | 490Mpps | Yes, 40G to 100G License |
| S6720-50L-HI-48S | 48-port 10GE SFP+,2-port 40GE/100GE QSFP28,4-port 40GE QSFP+ | 2.56Tbps | 420Mpps | No |
| S6720-54C-EI-48S-AC S6720-54C-EI-48S-DC |
48-port 10GE SFP+,2-port 40GE QSFP+ | 2.56 Tbps | 1080Mpps | No |
| S6720-52X-PWH-SI | 48-port PoE++ 100M/1000M/2.5GE/5GE/10GE BASE-T(MultiGE port),4-port 10GE SFP+ | 2.56 Tbit/s | 480 Mpps | No |
| S6720-56C-PWH-SI S6720-56C-PWH-SI-AC |
32-port 1000 Base-T,16-port multi-gigabit Base-T, 4-port 10 GE SFP+ | 2.56 Tbit/s | 240 mpps | No |
Table 2 S6720-54C-EI-48S-DC applicable modules and cables recommended for you
| Model | Description |
| GE SFP Copper Modules | |
| SFP-1000BaseT | Electrical Transceiver,SFP,GE,1000BASE-T RJ45 0.1km |
| GE eSFP Optical Modules | |
| eSFP-GE-SX-MM850 | Optical Transceiver,GE, eSFP 1000BASE-SX MMF 0.1km 850nm LC |
| OGSC10DD0/SFP-GE-LX-SM1310 | Optical Transceiver,GE, eSFP1000BASE-LX10/LH SMF 10km 1310nm LC |
| OGSC40DD0/SFP-GE-EX-C | Optical Transceiver,GE, eSFP 1000BASE-EX SMF 40km 1310nm LC |
| S-SFP-GE-LH40-SM1550 | Optical Transceiver,GE, eSFP SMF 40km 1550nm LC |
| 10GE SFP+ Optical Modules | |
| SFP-10G-SR/SFP-10G-SR-C | Optical Transceiver,SFP+,10GBASE-SR MMF 0.3km 850nm LC |
| OSX010000 | Optical Transceiver,SFP+,10G SMF 10km 1310nm LC |
| OSX040N01 | Optical Transceiver,SFP+,10GBASE-ER SMF 40km 1550nm LC |
| SFP-10G-CU1M | 1m 10G SFP+ high-speed copper cable |
| SFP-10G-CU3M | 3m 10G SFP+ high-speed copper cable |
| SFP-10G-CU5M | 5m 10G SFP+ high-speed copper cable |
| SFP-10G-AC10M | 10m 10G SFP+ high-speed copper cable |
| SFP-10G-AOC3M | 3m 10G SFP+ AOC cable |
| SFP-10G-AOC10M | 10m 10G SFP+ AOC cable |
| 40GE QSFP+ Optical Modules | |
| QSFP-40G-eSR4 | Optical Transceiver,QSFP+,40GBASE-eSR4 MMF 0.3km 850nm MPO/PC |
| QSFP-40G-LR4 | Optical Transceiver,QSFP+,40GBASE-LR4 SMF 10km 1310nm LC |
| QSFP-40G-eSM4 | Optical Transceiver,QSFP+,40GBASE-eSM4 SMF 10km 1310nm MPO/APC |
| QSFP-40G-CU1M | 1m 40G QSFP+ to QSFP+ high-speed copper cable |
| QSFP-40G-CU3M | 3m 40G QSFP+ to QSFP+ high-speed copper cable |
| QSFP-40G-CU5M | 5m 40G QSFP+ to QSFP+ high-speed copper cable |
| QSFP-4SFP10G-CU1M | 1m 40G QSFP+ to 4*SFP+ high-speed copper cable |
| QSFP-4SFP10G-CU3M | 3m 40G QSFP+ to 4*SFP+ high-speed copper cable |
| QSFP-4SFP10G-CU5M | 5m 40G QSFP+ to 4*SFP+ high-speed copper cable |
| QSFP-H40G-AOC10M | 10m 40G QSFP+ to QSFP+ AOC cable |
| QSFP-4SFP10-AOC10M | 10m 40G QSFP+ to 4*SFP+ AOC cable |
Tech Specs
| Item | Description |
| Fixed Ports | 48 x 10 GE SFP+, 2 x 40 GE QSFP+ ports |
| Switching Capacity | 2.56 Tbit/s |
| Forwarding Performance | 1,080 Mpps |
| Extended Slots | One extended slot |
| MAC Address Table | 288k MAC address entries MAC address learning and aging Static, dynamic, and black hole MAC address entries Packet filtering based on source MAC addresses |
| VLAN Features | 4,094 VLANs Guest VLAN and voice VLAN VLAN assignment based on MAC addresses, protocols, IP subnets, policies, and ports 1:1 and N:1 VLAN Mapping QinQ and selective QinQ |
| Memory (RAM) | 2 GB |
| Flash | 512 MB in total. To view the available flash memory size, run the display version command. |
| Mean time between failures (MTBF) | 79.39 years (without card) |
| Mean time to repair (MTTR) | 2 |
| Availability | > 0.99999 |
| Service port surge protection | NA |
| Power supply surge protection | Using AC power modules: ±6 kV in differential mode, ±6 kV in common mode |
| Using DC power modules: ±1 kV in differential mode, ±2 kV in common mode | |
| Dimensions (H x W x D) | Basic dimensions (excluding the parts protruding from the body): 44.4 mm x 442.0 mm x 424.7 mm |
| Maximum dimensions (the depth is the distance from ports on the front panel to the handle on the rear panel): 44.4 mm x 442.0 mm x 451.8 mm | |
| Weight (with packaging) | 10.2 kg (22.49 lb) |
| Stack ports | Any 10GE SFP+ ports (a maximum of 16 physical ports) |
| Any 40GE QSFP+ ports (a maximum of 6 physical ports) | |
| RTC | Supported |
| RPS | Not supported |
| PoE | Not supported |
| Rated voltage range | 100 V AC to 240 V AC, 50/60 Hz |
| -48 V DC to -60 V DC | |
| Maximum voltage range | 90 V AC to 264 V AC, 47 Hz to 63 Hz |
| -38.4 V DC to -72 V DC | |
| Maximum power consumption (100% throughput, full speed of fans) | 296.1 W |
| Typical power consumption (30% of traffic load, tested according to ATIS standard) | 190 W (without card) |
| Operating temperature | 0°C to 45°C (32°F to 113°F) at an altitude of 0-1800 m (0-5906 ft.) |
| NOTE: | |
| When the altitude is 1800-5000 m (5906-16404 ft.), the highest operating temperature reduces by 1°C (1.8°F) every time the altitude increases by 220 m (722 ft.). | |
| Storage temperature | -40°C to +70°C (-40°F to +158°F) |
| Noise under normal temperature (27°C, sound power) | < 72.1 dB(A) |
| Relative humidity | 5% to 95%, noncondensing |
| Operating altitude | 0-5000 m (0-16404 ft.) |
| Certification | EMC certification |
| Safety certification | |
| Manufacturing certification | |
| Part number | 02350NHV |
Additional information
| Weight | 14.0 kg |
|---|---|
| Dimensions | 71.0 × 55.0 × 17.5 cm |
| PoE Type |
Non-PoE |
| Features | |
| Port |
48+ |
| Rate |
10G, 40G |
Q&A
Q: What is the difference between S6720-54C-EI-48S-DC and S6720-50L-HI-48S-DC?
A: S6720-54C-EI-48S has only 10G 40G ports, with 1 FAN, extended cards supported; while S6720-50L-HI-48S can support 100G QSFP28 ports, and with 2 FANS, but have no extended slot . For details, you can refer to above overview part.
Q: Then can S6720-50L-HI-48S-DC replace S6720-54C-EI-48S-DC?
A: Yes, because these two models have almost same specifications, and they share same AC or DC power modules.
Q: Can I Stack my S6720-HI switch and S6720-EI?
A: No, different models cannot stack, only same switch models support stack.
Q: How to connect S6720-HI 40G interface with S6720-EI 40G interface?
A: Using a connected cable, optical module and patch cord to connect the 40G interface, and please do not use the stack cable.
Q: Do I need to buy power supply for S6720-54C-EI-48S-DC?
A:Yes, by default S6720-54C-EI-48S-DC has one power supply.
Q: Do I need to buy SFP Modules for S6720-54C-EI-48S-DC?
A:Yes, as S6720-54C-EI-48S-DC is a optical switch, the optical ports will not able to work without SFP module, if you don’t have SFP module, you will need to purchase additional SFP Module.
Q: Does S6720-54C-EI-48S-DC support dual power?
A: Yes.
Q: Can I use AC and DC power supplies simultaneously?
A: Yes, you can.
Q: How many slots S6720-54C-EI-48S-DC support?
A: One extended slot for 4x40GE QSFP+ interface card
Q: Can I use compatible SFP/SFP+ module on Huawei S6720 switch?
A:Yes, but the switch may generate alarm, however, it will not affect normal use
Q: Can I get technical support from Thunder-link.com if we purchase S6720-54C-EI-48S-DC from you?
A: Yes, Thunder-link.com has experienced technical team on Huawei switches, however, you may need to purchase technical support service from us as by default we only provide one year hardware warranty.
Matching Products…
Reviews (3)
3 reviews for S6720-54C-EI-48S-DC
Why Thunder-link.com
10 Years Experience
As a global leading professional Huawei network hardware and solution provider, we have delivered Huawei, ZTE, Nokia, CISCO, Fiberhome, etc, equipment to 500+ customer groups in 90+ countries over the past 10 years. Know more
Alex
Panama
S6720-54C-EI-48S-DC has been installed for one year. All went well.
Godwin
Philippines
Our S6720-54C didn’t work after we use about 1 year, warranty expired, but I tried to contact my sales account at Thunder-link, she applied for repair for us.
Rex
Chile
Excellent! I purchased 4 pcs S6720-54C-EI-48S-DC for our inventory