![Icon [all products]](https://www.thunder-link.com/tl-content/uploads/2022/05/Icon-all-products-1.svg "Icon [all products]"){kind=icon}
All products
in stock inquire lead time
Description
Highly efficient site
Battery hibernation
Temperature control and energy saving
High-density heat exchange
High-efficiency rectifiers
Intelligent site
IP, GPRS, or in-band networking
Intelligent temperature control management
Integrated site
Modular power distribution design
Tech Specs
| Cabinet Description | ||||
| MTS9302A-HD16A3 | MTS9302A-HD16A2 | MTS9302A-HA16A3 | MTS9302A-HA16A2 | |
| External dimensions (H x W x D) | Cabinet: 1500 mm x 650 mm x 650 mm (excluding the base and the protruding part of the door)
Base: 100 mm x 650 mm x 650 mm |
|||
| Space for batteries (H x W x D) | Single-layer net space: 330 mm x 610 mm x 590 mm | |||
| Space for customer equipment | 9 U | |||
| Cabinet weight | < 120 kg (excluding rectifiers and batteries) | < 135 kg (excluding rectifiers and batteries) | ||
| Temperature control mode | Equipment compartment: heat exchanger HXC100P(1) (1500 W)
Battery compartment: direct ventilation |
Equipment compartment: heat exchanger HXC70P(1) (850 W)
Battery compartment: direct ventilation |
Equipment compartment: heat exchanger HXC100P(1) (1500 W)
Battery compartment: air conditioner PC300D |
Equipment compartment: heat exchanger HXC70P(1) (850 W)
Battery compartment: air conditioner PC300D |
| Cable routing mode | Routed in and out from the bottom | |||
| IP rating | Equipment compartment: IP55
Battery compartment: IP45 |
IP55 | ||
| Installation mode | Installed on a floor or a rooftop | |||
| Optional components | Sensor: smoke sensor, temperature and humidity sensor, and water sensor
Light Base cover plate Lithium battery support Antitheft enclosure frame DC output box AC output box Heater |
Sensor: smoke sensor, temperature and humidity sensor, and water sensor
Light Base cover plate Lithium battery support Antitheft enclosure frame DC output box AC output box |
||
| Power subrack | 200 A | |||
| Monitor | SMU02C | |||
| Application environment | When lead-acid batteries are installed: It can be used in Class C environments and cannot be used in Class D environments.
When lithium batteries are installed: It can be used in Class B environments and cannot be used in Class C and Class D environments. |
Class C environment, which cannot be used in class D environments | ||
| Electrical Specifications | ||||
| AC input system and input voltage | 220 V single-phase: 85–300 V AC
110 V dual-live wire: 90–290 V AC Three-phase compatible with single-phase: 147–519 V AC |
|||
| Input frequency | Frequency range: 45–66 Hz; nominal frequency: 50 Hz/60 Hz | |||
| Power factor | ≥ 0.99 (load ≥ 50%) | |||
| Total harmonic distortion (THD) | ≤ 5% (Vin = 208 V AC, 220 V AC, 230 V AC; 50%–100% load) | |||
| Output voltage range | 48 V mode: 43.2–57.6 V DC
57 V mode: 48–58 V DC |
|||
| Default output voltage | 48 V mode: 53.5 V DC
57 V mode: 57 V DC |
|||
| Output power | Output power = Output power of a single rectifier x Number of rectifiers | |||
| Regulated voltage precision | ≤ ±1% | |||
| Ripple and noise | ≤ 200 mVp-p | |||
| Psophometrically weighted noise | ≤ 2 mV | |||
| Current sharing imbalance | < ±5% (20%–100% load) | |||
| AC input overvoltage protection threshold | > 300 V AC | |||
| AC input overvoltage recovery threshold | When the voltage is restored to 290 V AC, the output resumes. | |||
| AC input undervoltage protection threshold | < 85 V AC | |||
| AC input undervoltage recovery threshold | When the voltage is restored to 90 V AC, the output resumes. | |||
| DC output overvoltage protection threshold |
Range: –58.5 V DC to –60.5 V DC 1. If overvoltage occurs due to an internal fault, the rectifier locks out. 2.If the external voltage is greater than –63 V for more than 500 ms, the rectifier locks out. |
|||
| AC surge protection | Nominal lightning strike discharge current: 20 kA (8/20 μs); maximum lightning strike discharge current: 40 kA (8/20 μs) | |||
| DC surge protection | 10 kA in differential mode, 20 kA in common mode, 8/20 µs | |||
| Safety design | IEC 62368-1, IEC 62368-22 | |||
| Mean time between failures (MTBF) | 200,000 hours (at 25°C) | |||
Reviews (0)
Why Thunder-link.com
Reviews
There are no reviews yet.