EXECUTIVE SUMMARY
The Multi-Operator Virtual OLT Architecture represents a paradigm shift in access network infrastructure, operationalizing the Broadband Forum TR-384 Cloud Central Office (CloudCO) reference framework to enable true multi-tenancy at the physical access layer. By disaggregating the traditional monolithic Optical Line Terminal into discrete hardware and software components, this architecture allows Infrastructure Providers to deploy a single physical PON access network while offering isolated, virtualized OLT instances to multiple Virtual Network Operators (VNOs). This approach directly addresses the industry demand for reduced Capital Expenditure and Operational Expenditure through resource sharing, while simultaneously enabling rapid service innovation and shortened time-to-market for retail service providers . The platform leverages commercial-off-the-shelf whitebox switching silicon and standardized northbound abstractions, providing a carrier-grade, scalable foundation for next-generation broadband service delivery.

HARDWARE ARCHITECTURE & SILICON
The physical foundation of the Multi-Operator vOLT is a high-density, non-blocking whitebox switching platform optimized for access aggregation. Central to the architecture is a purpose-built PON MAC SoC that handles the line-rate processing of GPON and XGS-PON protocols, while all control plane and management functions are offloaded to a separate commodity compute environment. This separation aligns with the TR-384 principle of decoupling network functions from proprietary hardware. The system utilizes a leaf-spine fabric interconnect where the vOLT hardware acts as a leaf switch, providing 100GbE uplinks to the spine layer for high-capacity aggregation and control plane connectivity. The hardware design emphasizes front-to-back airflow for data center compatibility and supports hot-swappable redundant power supplies and fan modules to ensure continuous operation in carrier environments.
KEY FEATURES & MULTI-TENANCY LOGIC
– **TR-384 Compliant Disaggregation**: Full separation of the PON data plane (hardware) from the control and management plane (software), enabling independent scaling and vendor interoperability through the Broadband Access Abstraction (BAA) layer .
– **Virtual Network Operator Isolation**: Hardware-enforced resource partitioning allows each VNO to manage their own logical OLT instance, including independent VLAN assignment, bandwidth profiles, and subscriber authentication parameters, ensuring complete operational separation .
– **Broadband Access Abstraction (BAA) Layer**: Provides a vendor-agnostic northbound NETCONF/YANG interface, abstracting the complexities of underlying PON hardware and allowing the CloudCO Domain Orchestrator to manage multi-vendor access nodes uniformly .
– **Scalable PON Capacity**: Supports high-density deployment with up to 16 XGS-PON or GPON ports per 1RU or 2RU chassis, utilizing pluggable SFP+ form factors to enable incremental capacity activation as subscriber demand grows .
– **Carrier-Grade Redundancy**: Dual hot-swappable AC/DC power supplies and hardware-based link redundancy (1:1 protection on uplinks) ensure high availability for multi-tenant wholesale services.
COMPLIANCE & STANDARDS
The architecture is engineered to comply with the Broadband Forum TR-384 Cloud Central Office Reference Architectural Framework, ensuring alignment with global operator requirements for NFV and SDN integration. The system supports the TR-370 Fixed Access Network Sharing requirements, providing the necessary data models for multi-operator resource partitioning. Protocol support includes ITU-T G.984 (GPON) and G.9807 (XGS-PON) for physical layer transmission, NETCONF/YANG for management, and standard Ethernet bridging (802.1ad, 802.1Q) for service demarcation. The hardware meets NEBS Level 3 and ETSI environmental standards for deployment in telco central offices and edge data centers.
TECHNICAL SPECIFICATIONS
The following table summarizes the core physical and performance parameters of the Multi-Operator vOLT hardware platform.
| Parameter | Specification |
|---|---|
| Form Factor | 1RU Standard / 2RU ETSI (Optional) |
| PON Port Density | 16 x SFP+ (GPON / XGS-PON / Combo-PON) |
| Uplink Interfaces | 2 x QSFP28 (100GbE) or 8 x 25GbE (Breakout) |
| Switching Capacity | 300 Gbps Full-Duplex (Non-Blocking) |
| Control Plane Interface | 2 x 10/25GbE SFP28 (Dedicated Management/Control) |
| Power Supply | Dual Hot-Swappable Redundant AC (100-240V) or DC (-48V) |
| Airflow | Front-to-Back (Data Center Optimized) |
| Operating Temperature | 0°C to 45°C (Commercial) / -40°C to 65°C (Hardened) |
| Management Protocols | NETCONF/YANG, SNMPv3, CLI, ONIE Installer |
| Multi-Tenancy Support | VNO Isolation via BAA Layer, VLAN-based Service Demarcation |
ORDERING SKU INFORMATION
– **VOLT-MO-16XGS**: 1RU Multi-Operator vOLT, 16x XGS-PON SFP+ ports, 2x 100GbE QSFP28 uplinks, Dual AC PSUs, Front-to-Back Airflow.
– **VOLT-MO-16GPON**: 1RU Multi-Operator vOLT, 16x GPON SFP+ ports, 2x 100GbE QSFP28 uplinks, Dual DC PSUs, Front-to-Back Airflow.
– **VOLT-SW-CTRL**: Software License, CloudCO vOLT Control Plane (BAA Layer compatible), Per-VNO Instance Enablement.

📥 Download Technical Specification
Click the button below to view or download the full official PDF datasheet.