We will provide an example for configuring a ME60 BRAS to obtain an EDSG service policy including limited bandwidths from local configurations

This article gives you an introduction of PoE, PoE+ and PoE++ on Huawei Switch

You can manage a switch through a web system or a CLI.

The virtual tunnel endpoint (VTEP) then decapsulates the packets and sends the packets to the destination host.

We always notice that word of “RPS” in Huawei switch datasheet, such as S5720-28X-LI, it supports RPS, which means that this switch can connect with a RPS1800 to work normally when its internal power module fails. This article will mainly introduce how to connect RPS supported switch with the RPS1800.

Huawei S5732-H series switch are full-10GE(Multi-GE capable) switches developed by Huawei for the Wi-Fi 6 era, it supports 100M/1G/2.5G/5G/10G Base-T, but the ports support 2.5GE by default, you can purchase RUT (right-to-use) licenses to upgrade the port rate (every 12 ports per RTU license) from 2.5GE to 5GE, or 10GE. This article will mainly introduce the RUT license.