Description

Huawei S12708 switch with 2xMPU slots, 2xCMU slots, 8xLPU slots, 4xSFU slots, 6xPower Module slots, 4xFan Module slots

Forwarding perfomance: 6240Mpps

Switching capacity: 12.32Tbps

Huawei S12700 Series agile core switches have a fully programmable architecture to best meet fast-changing service needs, allowing new services to be flexibly and quickly provisioned within six months. The series provides high-performance Layer 2 and Layer 3 switching services, supports millions of hardware entries, and meets campus network evolution needs over the next ten years. Built-in, large capacity Wireless Local Area Network (WLAN) Access Controller (AC) functionalities achieve wired and wireless convergence, eliminating the capacity bottleneck associated with ACs.

Tech Specs

Item	S12708
Switching capacity	12.32Tbps/44.96Tbps
Packet forwarding rate	6240/30,240 mpps
Service slots	8
Wireless network management	Native AC
	AP access control, AP region management, and AP profile management
	Radio profile management, uniform static configuration, and centralized dynamic management
	Basic WLAN services, QoS, security, and user management
User management	unified user management
	802.1x, MAC address, and Portal authentication
	Charging based on traffic volume and online duration
	User authorization based on user groups, domains, and time ranges
iPCA quality awareness	Adds marks on service packets to measure the number of lost packets and packet loss ratios in real time with zero payload
iPCA quality awareness	Measures the number of lost packets and packet loss ratios at the network and device levels on Layer 2 and Layer 3 networks
SVF 2.0 virtualization	Up to 10,240 clients (access switches and APs) virtualized into a single device
	2-level AS structure
	Unified management on Huawei and non-Huawei devices
VLAN	Supports 4K VLANs
	Supports the default VLAN
	Supports VLAN switching
	Supports QinQ and selective QinQ
	Supports MAC address-based VLAN assignment
	Supports Access, trunk, and hybrid interface types, auto-negotiation of LNP links
MAC address	Supports automatic learning and aging of MAC addresses
	Supports static, dynamic, and blackhole MAC address entries
	Supports packet filtering based on source MAC addresses
	Supports MAC address limiting based on ports and VLANs
ARP	256K ARP entries
ARP	ARP Snooping
IP routing	3M IPv4 routing entries
	IPv4 dynamic routing protocols, such as RIP, OSPF, IS-IS, and BGP
	IPv6 routing protocols, such as RIPng, OSPFv3, IS-ISv6, and BGP4+
Multicast	Supports IGMP v1/v2/v3, IGMPv1/v2/v3 snooping
	Supports PIM-SM, PIM-DM, PIM-SSM
	Supports 128, 000 multicast routing entries
	Supports Multicast Source Discovery Protocol (MSDP) and Multiprotocol Extensions for BGP (MBGP)
	Supports multicast traffic control
	Supports multicast querier
	Supports suppression on multicast packets
	Supports multicast CAC, ACL
MPLS	Supports basic MPLS functions
	Supports MPLS OAM
	Supports MPLS TE
	Supports MPLS VPN/VLL/VPLS
Reliability	Supports LACP and E-Trunk
	Supports VRRP and BFD for VRRP
	Supports BFD for BGP/IS-IS/OSPF/static route
	Supports NSR, NSF, and GR for BGP/IS-IS/OSPF/LDP
	Supports TE FRR and IP FRR
	Supports Ethernet OAM (IEEE 802.3ah and 802.1ag) (Hardware-based)
	Supports ITU-Y.1731
	Supports DLDP
	Supports HSR
QoS	Supports traffic classification based on Layer 2 headers, Layer 3 protocols, Layer 4 protocols, and 802.1p priority
	Supports actions of ACL, CAR, re-mark, and schedule
	Supports queue scheduling algorithms, such as SP, WRR, DRR, SP+WRR, and SP+DRR
	Supports congestion avoidance mechanisms, such as WRED and tail drop
	Supports H-QoS
	Supports traffic shaping
Configuration and maintenance	Supports console, telnet, and SSH terminals
	Supports the network management protocols, such as SNMP v1/v2c/v3
	Supports file uploading and downloading using FTP and TFTP
	Supports BootROM upgrade and remote upgrade
	Supports hot patches
	Supports user operation logs
	Supports OPS
Security and management	Supports MAC address, Portal, 802.1x and DHCP snooping triggered authentication
	Supports MACsec
	Supports RADIUS and HWTACACS authentication for login users
	Supports command line authority control based on user levels, preventing unauthorized users from using commands configurations
	Supports defense against DoS attacks, TCP SYN Flood attacks, UDP Flood attacks, broadcast storms, and heavy traffic attacks
	Supports RMONA
	Supports Secure Boot
Value-added services	Supports firewall
	Supports NAT
	Supports Intrusion Protection System
	Supports IPSec, SSL VPN
	Supports Cybersecurity Intelligence System
	Supports Encrypted Communication Analytics
	Supports Load balancing Analog Digital Conversion
Interoperability	VLAN-based Spanning Tree (VBST) (interoperating with PVST, PVST+, and RPVST)
	Link-type Negotiation Protocol (LNP) (similar to DTP)
	VLAN Central Management Protocol (VCMP) (similar to VTP)
Energy saving	Supports IEEE 802.3az: Energy Efficient Ethernet (EEE)
Dimensions(W x D x H)	663.95 mm × 442 mm × 489 mm
Chassis weight(empty)	42KG
Operating voltage	DC: –40 V to –72 V AC: 90 V to 290V
Power supply capability of the equipment	≤4400W

Additional information

Weight	62.0 kg
Dimensions	81.0 × 56.0 × 76.0 cm
PoE Type	Non-PoE
Features	Authorized Partner, Original New Sealed
Rate	100G

Q&A

Q:What’s the difference between S12708S and 12700E-8?

A:

Item	S12708	S12700E-8	S12708 Detail	S12700E-8 Detail
Surge protection (electrical port)	Supported	Supported	2200W AC:AC power interface: common mode: ±4kV : differential mode: ±2kV 3000W AC:AC power interface: common mode: ±6kV : differential mode: ±6kV 2200W DC:DC power interface: common mode: ±4kV : differential mode: ±2kV	3000W AC:AC power interface: common mode: ±6kV : differential mode: ±6kV 2200W DC:DC power interface: common mode: ±4kV : differential mode: ±2kV
Availability	Supported	Supported	0.9999984	0.999996515
Input current, input voltage, and output power	Supported	Supported	2200W AC:Input: AC(90V to 290V), Output: 2200W(220V,efficiency:92%), 1100W(110V,efficiency:86%) 3000W AC:1,Input: AC(90V to 290V), Output: 3000W(220V,efficiency:9,4%), 1500W(110V,efficiency:86%) 2,Input:DC (190V DC to 290V DC), Output: 3000W(efficiency:94% 2200W DC:Input:DC (-40 to -72V), Output: 2200W(efficiency:92%)	3000W(220V,efficiency:9,4%), 1500W(110V,efficiency:86%) 2,Input:DC (190V DC to 290V DC), Output: 3000W(efficiency:94% 2200W DC:Input:DC (-40 to -72V), Output: 2200W(efficiency:92%)
Weight (empty/full loaded, without package，kg)	Supported	Supported	42kg/120kg Remarks: 1. An empty-loaded chassis has no line card, SRU, or power module installed. Filler panels are installed on the empty slots. 2. A full-loaded chassis has all the SRUs, SFUs, line cards, and power modules installed. The value 31.6 is the weight of the chassis with the heaviest components.	42.5kg/114kg Remarks: 1. An empty-loaded chassis has no line card, SRU, or power module installed. Filler panels are installed on the empty slots. 2. A full-loaded chassis has all the SRUs, SFUs, line cards, and power modules installed. The value 31.6 is the weight of the chassis with the heaviest components.
Maximum 40GE port density	Supported	Supported	128	192
Power module type	Supported	Supported	2200W AC/3000W AC/2200W DC	3000W AC/2200W DC
Soft Version of power modules	Supported	Supported	2200W AC:[V2R5, ~] 3000W AC:[V2R5, V2R11C10]2200W;[V2R12, ~]3000W 2200W DC:[V2R5, ~]	3000W AC:[V2R19C00, ~]3000W 2200W DC:[V2R19C00, ~]
MTBF(year)	Supported	Supported	40.04 years	32.76 years
Maximum 100GE port density	Supported	Supported	64	192
Maximum power output capability (including the system power output and PoE power output)	Supported	Supported	62200W AC:8800W(220V input); 6600W(110V input) 63000W AC:8800W(220V input); 8800W(110V input) 6*2200W DC:8800W	63000W AC:12000W(220V input); 9000W(110V input) 62200W DC:12000W

Reviews (0)

Reviews

There are no reviews yet.

Be the first to review “S12708”

Your email address will not be published. Required fields are marked *

Your rating *

Your review *

Your Country *

Name *

Email

Solve Captcha* Batteries

You have to be logged in to be able to add photos to your review.

Why Thunder-link.com

15 Years Experience

As a global leading professional Huawei network hardware and solution provider, we have delivered Huawei, ZTE, Nokia, CISCO, Fiberhome, etc, equipment to 500+ customer groups in 90+ countries over the past 15 years. Know more

Premium Quality Guaranteed

Strict 3-Level Quality Control procedure: 1st-Level inspection; 2nd-Level In-stock test; 3rd-Level 24-hour pre-delivery test to guarantee premium quality. Know more

Value over price

What we offer to our customers is value rather than price. We enable customers to enjoy the benefit of our reliable delivery products and generate more value to the greatest extent. Know more

Tailored Technical Support

We provide customers with personalized and professional tech support by remote diagnosis, fault-location and troubleshooting. "We are here to help you instantly when you need it."

Flexible Payment

We continuously offer flexible payment methods such as Wire Transfer, Paypal, L/C, Western Union and Alipay, to help customer enjoy a more convenient shopping experience. Know more