Huawei S3700-28TP-PWR-SI switch with 24-ports 100BASE-TX, 2-ports GE SFP, 2-ports GE SFP combo, 2 power slots, 1 AC power module equipped
in stock 3-5 days lead time
Authorized Partner x
Authorized Partner guaranteed or sourced from officially recognized partner. Chassis and modules come with 1 year warranty.
Original New Sealed x
Original, new and sealed switch; original packaging with seal; won't unpack the product without permission (insert the power module or replace the power supply cable).
Huawei S3700-28TP-PWR-EI switch with 24-ports 100BASE-TX, 2-ports GE SFP, 2-ports GE SFP combo
2 power slots, 1 AC power module equipped
No extension slots
Layer 3 Ethernet switch
Forwarding perfomance: 9.6Mpps
Switching capacity: 64Gbps
16K MAC address entries
POE switch
Huawei Quidway S3700 series enterprise switches are next-generation energy-saving Layer 3 switches. S3700 mainly deploys on an enterprise campus network. S3700 supports VLAN, PoE, routing and migration to an IPv6 network. S3700 uses advanced reliability technologies such as stacking, VRRP, and RRPP, enhancing network reliability and diversity.
Item | Description |
Fixed port | 24*10/100Base-TX ports, 2*1000Base-X SFP ports and 2*10/100/1000Base-T or 100/1000Base-X |
Forwarding performance | 9.6 Mpps |
MAC address table | Supports IEEE 802.1d compliance. |
Supports 16K MAC address entries. | |
Supports MAC address learning and aging. | |
Supports Static, dynamic, and blackhole MAC address entries. | |
Packet filtering based on source MAC addresses | |
VLAN features | Supports 4K VLANs |
Supports Guest VLANs, voice VLAN, and super VLAN | |
Supports VLAN assignment based on MAC addresses, protocols, and IP subnets | |
Supports QinQ | |
Supports Selective QinQ | |
Supports 1:1 VLAN mapping | |
Supports N:1 VLAN mapping | |
Reliability | Supports RRPP (ring topology, intersecting rings, and multi-instance), implementing protection switchover within 50 ms |
Supports Smart Link tree topology and Smart Link multi-instance, providing the millisecond-level protection switchover | |
Supports STP(IEEE 802.1d), RSTP(IEEE 802.1w), and MSTP(IEEE 802.1s) Supports BPDU protection, root protection and loop protection |
|
Supports Smart Ethernet Protection (SEP) | |
IP routing | Supports Static routing, RIPv1, RIPv2, and ECMP |
IPv6 features | Supports Neighbor Discovery (ND) |
Supports Path MTU (PMTU) | |
Supports IPv6 ping, IPv6 tracert, and IPv6 Telnet | |
Supports Manually configured tunnel | |
Supports 6 to 4 tunnel | |
Supports ISATAP tunnel | |
Supports ACLs based on the source IPv6 address, destination IPv6 address, Layer 4 ports, or protocol type |
|
Supports MLD v1/v2 snooping | |
Multicast | Supports 1 K multicast groups |
Supports IGMP v1/v2/v3 snooping and IGMP fast leave | |
Supports Multicast VLAN and multicast replication between VLANs | |
Supports Multicast load balancing among member ports of a trunk | |
Supports Controllable multicast | |
Supports Port-based multicast traffic statistics | |
QoS/ACL | Supports Rate limiting on packets sent and received by an interface |
Supports Packet redirection | |
Supports Port-based traffic policing and two-rate three-color CAR | |
Supports Eight queues on each port | |
Supports WRR, DRR, SP, WRR+SP, and DRR+SP queue scheduling algorithms | |
Supports Re-marking of the 802.1p priority and DSCP priority | |
Supports Packet filtering on Layers 2 through 4, filtering out invalid frames based on the source MAC address, destination MAC address, source IP address, destination | |
Supports IP address, port number, protocol type, and VLAN ID | |
Supports Rate limiting in each queue and traffic shaping on ports | |
Security & access | Supports User privilege management and password protection |
Supports DoS attack defense, ARP attack defense, and ICMP attack defense | |
Supports Binding of the IP address, MAC address, interface, and VLAN | |
Supports Port isolation, port security, and sticky MAC | |
Supports Blackhole MAC address entries | |
Supports Limit on the number of learned MAC addresses | |
Supports 802.1x authentication and limit on the number of users on an interface | |
Supports AAA authentication, RADIUS authentication, HWTACACS authentication, and NAC | |
Supports SSH v2.0 and CPU defense | |
Supports Blacklist and whitelist | |
Supports DHCP Server, DHCP Relay, DHCP Snooping, DHCP Security | |
Surge protection | 6KV surge protection capability on service ports (1KV on service ports on PoE devices) |
Management and maintenance | Supports iStack and MAC Forced Forwarding (MFF) |
Supports Remote configuration and maintenance using Telnet | |
Supports Auto-Config.and Virtual cable test | |
Supports Ethernet OAM (IEEE 802.3ah and 802.1ag) | |
Supports SNMP v1/v2c/v3 and RMON | |
Supports MUX VLAN,GVRP and Web NMS | |
Interoperability | Supports VBST (Compatible with PVST/PVST+/RPVST) |
Supports LNP (Similar to DTP) | |
Supports VCMP (Similar to VTP) | |
Operating environment | Operating temperature: 0°C to 50°C(long term); Relative humidity: 10%–90% (non-condensing) |
Power supply | AC: Rated voltage range: 100 V to 240 V AC; 50/60 Hz Maximum voltage range: 90 V to 264 V AC; 50/60 Hz |
Dimensions (mm) | 442 (W) x 420 (D)x 43.6 (H) |
Weight | < 4 kg |
Power consumption | < 818W(PoE: 740W) |
Weight | 8.5 kg |
---|---|
Dimensions | 57.7 × 59.0 × 12.0 cm |
PoE Type |
Non-PoE |
Features | |
Port |
12-24 |
Rate |
GE |
Q: Do I need to buy power supply for S3700-28TP-PWR-SI?
A: It comes with a 500W power by defaule, if you want a standy power, you need to purchase additional power W0PSA5000(500W AC PoE power module).
Q: Does S3700-28TP-PWR-SI support DC?
A: No, Huawei POE switch only support AC Power supply.
Q: What is the difference between Huawei 3700 switch and 3300 switch?
A: Huawei S3700 target the enterprise market, S3300 target at telecom market, but most function are the same, the manufacturer did this mostly for marketing reasons as the telecom market most are big customers with better discount.
Q: Does the S3700 support port mirroring?
A: Yes, it supports.The details are as follows:
1. A maximum of four observing ports can be configured on an S3700. Packets from multiple ports can be mirrored to the same observing port. You can mirror incoming packets, outgoing packets, or both to an observing port.
2. The S3700 supports Remote Switched Port Analyzer (RSPAN). That is, the observing port and mirrored port can be located on different switches. This facilitates remote device management.
3. Flows can be mirrored from multiple ports to the same observing port. Flows to be mirrored are determined by the traffic classification rule.
Q: After a Traffic Policy is applied globally on S3700, the rate limit is invalid when a Traffic Policy is applied to interface?
A: If more than 128 ACL rules are configured, a traffic policy must be applied to the interface, VLAN, and globally in sequence. To update ACL rules, delete all traffic policies from the interface, VLAN, and system, and reconfigure traffic policies on the interface, in the VLAN, and globally in sequence.
Q: There are Multiple Ports in up state on the S3700. After VLAN mapping is configured on these ports, ping packets are lost and telnet packets are processed slowly. Why?
A: Scheduling of packet receiving tasks is improver. As a result, packet receiving tasks are switched frequently and there is low efficiency in processing packets. Ping packets are lost and Telnet packets are processed slowly.
Q: Why can the working rate of some combo interfaces on the S3700 be configured to 100 Mbit/s and other combo interfaces cannot?
A: You can know the working rate of combo interfaces on the S3700 according to the marks on the panel. The details are as follows:
If a combo interface is marked with 1000M, the working rate of the combo interface can only be 1000 Mbit/s.
If a combo interface is marked with 100/1000M, the working rate of the combo interface can be 100 Mbit/s or 1000 Mbit/s.
Q: Can the S3700 transparently transmit PAUSE frames?
A: PAUSE frames are sent and terminated at the MAC address layer of the forwarding chip. PAUSE Frames are used to control service traffic when the forwarding chip is congested. PAUSE frames cannot be forwarded.
Q: Why some S3752 switches cannot set up a Stack?
A: An S3752 does not support the stacking function if it uses a print circuit board (PCB) of version A.
Run the display version command on the S3752. If the following information is displayed, the S3752 uses a PCB of version A.
As a global leading professional Huawei network hardware and solution provider, we have delivered Huawei, ZTE, Nokia, CISCO, Fiberhome, etc, equipment to 500+ customer groups in 90+ countries over the past 10 years. Know more
Strict 3-Level Quality Control procedure: 1st-Level inspection; 2nd-Level In-stock test; 3rd-Level 24-hour pre-delivery test to guarantee premium quality. Know more
What we offer to our customers is value rather than price. We enable customers to enjoy the benefit of our reliable delivery products and generate more value to the greatest extent. Know more
We provide customers with personalized and professional tech support by remote diagnosis, fault-location and troubleshooting. "We are here to help you instantly when you need it."
We continuously offer flexible payment methods such as Wire Transfer, Paypal, L/C, Western Union and Alipay, to help customer enjoy a more convenient shopping experience. Know more
We provide extensive document resources to guide our customers to targetly solve the problem they may meet. Know more
Our products come with 1-year warranty. Customers can ask for a repair, replacement or refund for a major product failure. Know more
We won't stop to develop rapid and cost effective shipping options, providing the excellent experience to our global customers. Know more
We offer not only network products but also network proposal, mainstream and cost-effective solution to assist customers eliminate the concerns.
Huawei S3700-28TP-PWR-SI switch with 24-ports 100BASE-TX, 2-ports GE SFP, 2-ports GE SFP combo, 2 power slots, 1 AC power module equipped
(0 reviews) | 0
Reviews
There are no reviews yet.