Huawei S5320-52X-PWR-SI-AC switch with 48-ports 1000BASE-T POE+, 4-ports 10GE SFP+, 2 power slots, 1 AC power module equipped
in stock 3-5 days lead time
Authorized Partner x
Authorized Partner guaranteed or sourced from officially recognized partner. Chassis and modules come with 1 year warranty.
Original New Sealed x
Original, new and sealed switch; original packaging with seal; won't unpack the product without permission (insert the power module or replace the power supply cable).
Huawei S5320-52X-PWR-SI-AC switch, 48-ports 1000BASE-T POE+, 4-ports 10GE SFP+
With 2 power slots, 1 AC power module included
No extension slots
Layer 3 Ethernet switch
Forwarding performance: 132 Mpps
Switching capacity: 336Gbps
16K MAC address entries
POE switch
The S5320-SI series are gigabit Layer 3 Ethernet switches based on new generation of high-performance hardware and Huawei Versatile Routing Platform (VRP). It provides a large capacity, high-density GE interfaces, and 10GE uplink interfaces. With extensive service features and IPv6 forwarding capabilities,the S5320-SI is applicable to various scenarios. For example, it can be used as an access or aggregation switch on campus networks or an access switch in data centers. The S5320-SI integrates many advanced technologies in terms of reliability, security, and energy saving. It employs simple and convenient means of installation and maintenance to reduce customers’ O&M cost and help enterprise customers build a next-generation IT network.
Item | Description |
Fixed port | 48 Ethernet 10/100/1000 PoE+ ports, 4* 10 Gig SFP+ |
Extended slot | NA |
MAC address table | IEEE 802.1d compliance |
16K MAC address entries | |
MAC address learning and aging | |
Static, dynamic, and blackhole MAC address entries | |
Packet filtering based on source MAC addresses | |
VLAN | 4K VLANs |
Guest VLAN and voice VLAN | |
VLAN assignment based on MAC addresses, protocols, IP subnets, policies, and ports | |
1:1 and N:1 VLAN mapping | |
Ring protection | RRPP ring topology and RRPP multi-instance |
Smart Link tree topology and Smart Link multi-instance, providing millisecond-level protection switchover | |
Smart Ethernet Protection (SEP),G.8032 Ethernet Ring Protection Switching (ERPS) | |
STP (IEEE 802.1d), RSTP (IEEE 802.1w), and MSTP (IEEE 802.1s) | |
BPDU protection, root protection, and loop protection; BPDU tunnel | |
MPLS | MPLS L3VPN, MPLS L2VPN(VPWS/VPLS), MPLS-TE, MPLS QOS |
IP routing | Static route, RIPv1, RIPv2, RIPng, ECMP, OSFP, OSPFv3,BGP, BGP4+, ISIS, ISISv6 |
IPv6 features | Neighbor Discovery (ND) |
Path maximum transmission unit (PMTU) | |
IPv6 Ping, IPv6 Tracert, and IPv6 Telnet | |
6 to4 tunnel, ISATAP tunnel, and manually configur ed tunnel | |
ACLs based on source IPv6 addresses, destination IPv6 addresses, Layer 4 ports, or protocol types | |
Multicast Listener Discovery (MLD) v1/v2 snooping | |
Multicast forwarding | IGMP v1/v2/v3 snooping and IGMP fast leave |
Multicast forwarding in a VLAN and multicast replication between VLANs | |
Multicast load balancing among member ports of a trunk | |
Controllable multicast | |
Port-based multicast traffic statistics | |
QoS/ACL | Rate limiting on packets sent and received by an interface |
Packet redirection | |
Port-based traffic policing and two-rate three-color CAR | |
Eight queues on each port | |
WRR, DRR, PQ, WRR+PQ, and DRR+PQ queue scheduling algorithms | |
Re-marking of the 802.1p priority and DSCP priority | |
Packet filtering at Layer 2 to Layer 4, filtering out invalid frames based on the source MAC address, destination MAC address, source IP address, destination IP address, port number,protocol type, and VLAN I |
|
Rate limiting in each queue and traffic shaping on ports | |
Security features |
User privilege management and password protection |
DoS attack defense, ARP attack defense, and ICMP attack defense | |
Binding of the IP address, MAC address, interface, and VLAN | |
Port isolation, port security, and sticky MAC | |
Blackhole MAC address entries | |
Limit on the number of learned MAC addresses | |
802.1x authentication and limit on the number of users on an interface | |
AAA authentication, RADIUS authentication, HWTACACS+ authentication, and NAC | |
SSH v2.0 | |
Hypertext Transfer Protocol Secure (HTTPS) | |
CPU defense, Blacklist and whitelist | |
Reliability | RRPP ring topology and RRPP multi-instance |
Smart Link tree topology and Smart Link multi-instance, providing the millisecond-level protection switchover | |
SEP | |
ERPS(G.8032 v2) | |
STP(IEEE 802.1d), RSTP(IEEE 802.1w), and MSTP(IEEE 802.1s) | |
BPDU protection, root protection, and loop protection | |
E-Trunk | |
Management and Maintenance |
iStack |
MAC Forced Forwarding (MFF) | |
Virtual cable test | |
Port mirroring and RSPAN (remote port mirroring) | |
Remote configuration and maintenance by using Telnet | |
SNMP v1/v2c/v3 | |
RMON | |
Web NMS | |
Easy Operation | |
System logs and alarms of different levels | |
GVRP, MUX VLAN | |
Operating environment | Operating temperature: 0 O C–50 O C (long term); -5 O C–55 O C (short term) Relative humidity: 10%–90% (non-condensing |
Input voltage | AC: Rated voltage range: 100 V to 240 V AC, 50/60 Hz Maximum voltage range: 90 V to 264 V AC, 47/63 Hz DC: Rated voltage range: –48 V to –60 V, DC Maximum voltage range: –36 V to –72 V, DC |
Dimensions (mm) | 442 (W) x 420 (D)x 44.4 (H) |
Front power input | Yes |
Typical power consumption |
without PD: 51W;
with PD: <943.2W (PoE:740W) |
Weight | 14.5 kg |
---|---|
Dimensions | 71.0 × 55.0 × 1.0 cm |
PoE Type |
PoE+ |
Features | |
Port |
48+ |
Rate |
10G |
Q: What is the difference among S5300 LI, S5300 SI, S5300 EI?
A:
Features | LI | SI | EI | HI |
IPv4 Routing Protocol | Static route | Static route/RIP | Static route/RIP/OSPF /BGP/ISIS |
Static route/RIP /OSPF/BGP/ISIS |
IPv6 Routing Protocol | Static route | Static route/RIPng | Static route/RIPng/OSPFv3 /BGP4+/ISIS for IPv6 |
Static route/RIPng /OSPFv3/BGP4+ /ISIS for IPv6 |
Multicast | IGMP snooping/MLD snooping | IGMP Snooping/MLD Snooping | IGMP Snooping/MLD Snooping /IGMP/MLD/MSDP /PIM(IPv4)/PIM(IPv6) |
IGMP Snooping/MLD Snooping/IGMP/MLD /MSDP/PIM(IPv4) /PIM(IPv6) |
MPLS | Not supported | Not supported | MPLS LDP/MPLS TE/MPLS VPN Note:Only the S5310-EI supports these functions |
MPLS LDP/MPLS TE/MPLS VPN |
OAM/BFD | Software level | Software level | Software level | Hardware level |
Traffic analysis | sFlow | Not supported | sFlow | sFlow |
iStack | Stacking through service ports Note: The S5300-10P-LI-AC, S5306TP-LI-AC, S5300-28P-LI-BAT, and S5300-28P-LI-24S-BAT do not support stacking. |
Stacking through stack cards | S5300EI/S5320EI: stacking through stack cards S5310EI: stacking through service ports |
Stacking through service ports |
Q: Does the S5300 support blackhole routes?
A: Earlier versions of S5300 V100R005 do not support blackhole routes.The S5300 V100R005, and S5300 V100R006 and later versions support blackhole routes. The following command configures a blackhole route: ip route-static ip-address mask NULL 0
Q: Do the S5300 support the optical Modules of other Vendors?
A: The S5300 can use only the certificated optical modules. If an uncertificated optical module is used, an error may occur and Huawei is not responsible for it.
Q: What versions does IGMP Have? Which versions do S5300 support?
A: The IGMP protocol has three versions: IGMPv1, IGMPv2, and IGMPv3. V100R002 and earlier versions do not support IGMPv3, whereas later versions support all the three versions.Only supported by S5300EI, S5310EI, S5320EI, and S5300HI.
Q: Do I need to buy power supply for S5320-52X-PWR-SI-AC?
A: Yes, you need to buy AC power module.
Q: Can I use compatible SFP/SFP+ module on Huawei S5320 switch?
A:Yes, but the switch may generate alarm, however, it will not affect normal use.
Q: Can I get technical support from Thunder-link.com if we purchase S5320-52X-PWR-SI-AC from you?
A: Yes, Thunder-link.com has experienced technical team on Huawei switches, however, you may need to purchase technical support service from us as by default we only provide one year hardware warranty.
As a global leading professional Huawei network hardware and solution provider, we have delivered Huawei, ZTE, Nokia, CISCO, Fiberhome, etc, equipment to 500+ customer groups in 90+ countries over the past 10 years. Know more
Strict 3-Level Quality Control procedure: 1st-Level inspection; 2nd-Level In-stock test; 3rd-Level 24-hour pre-delivery test to guarantee premium quality. Know more
What we offer to our customers is value rather than price. We enable customers to enjoy the benefit of our reliable delivery products and generate more value to the greatest extent. Know more
We provide customers with personalized and professional tech support by remote diagnosis, fault-location and troubleshooting. "We are here to help you instantly when you need it."
We continuously offer flexible payment methods such as Wire Transfer, Paypal, L/C, Western Union and Alipay, to help customer enjoy a more convenient shopping experience. Know more
We provide extensive document resources to guide our customers to targetly solve the problem they may meet. Know more
Our products come with 1-year warranty. Customers can ask for a repair, replacement or refund for a major product failure. Know more
We won't stop to develop rapid and cost effective shipping options, providing the excellent experience to our global customers. Know more
We offer not only network products but also network proposal, mainstream and cost-effective solution to assist customers eliminate the concerns.
Huawei S5320-52X-PWR-SI-AC switch with 48-ports 1000BASE-T POE+, 4-ports 10GE SFP+, 2 power slots, 1 AC power module equipped
(0 reviews) | 0
Reviews
There are no reviews yet.